* [dpdk-dev] [PATCH v2] doc: fix testpmd sample qinq flow rules [not found] <1610623187-3631-1> @ 2021-01-19 13:00 ` Bernard Iremonger 2021-01-20 1:42 ` Li, Xiaoyun 0 siblings, 1 reply; 3+ messages in thread From: Bernard Iremonger @ 2021-01-19 13:00 UTC (permalink / raw) To: dev, xiaoyun.li; +Cc: Bernard Iremonger, stable In the Testpmd Flow rules management section, correct the TPID values in the Sample QinQ flow rules sub section. Also replace the keyword qinq_strip with extend in the vlan set command. Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands") Cc: stable@dpdk.org Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> --- doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst index 9be4500..6a00245 100644 --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst @@ -4426,14 +4426,14 @@ Sample QinQ flow rules Before creating QinQ rule(s) the following commands should be issued to enable QinQ:: testpmd> port stop 0 - testpmd> vlan set qinq_strip on 0 + testpmd> vlan set extend on 0 The above command sets the inner and outer TPID's to 0x8100. To change the TPID's the following commands should be used:: - testpmd> vlan set outer tpid 0xa100 0 - testpmd> vlan set inner tpid 0x9100 0 + testpmd> vlan set outer tpid 0x88A8 0 + testpmd> vlan set inner tpid 0x8100 0 testpmd> port start 0 Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM. -- 2.7.4 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [dpdk-dev] [PATCH v2] doc: fix testpmd sample qinq flow rules 2021-01-19 13:00 ` [dpdk-dev] [PATCH v2] doc: fix testpmd sample qinq flow rules Bernard Iremonger @ 2021-01-20 1:42 ` Li, Xiaoyun 2021-02-02 9:59 ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit 0 siblings, 1 reply; 3+ messages in thread From: Li, Xiaoyun @ 2021-01-20 1:42 UTC (permalink / raw) To: Iremonger, Bernard, dev@dpdk.org; +Cc: stable@dpdk.org Acked-by: Xiaoyun Li <xiaoyun.li@intel.com> > -----Original Message----- > From: Iremonger, Bernard <bernard.iremonger@intel.com> > Sent: Tuesday, January 19, 2021 21:01 > To: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com> > Cc: Iremonger, Bernard <bernard.iremonger@intel.com>; stable@dpdk.org > Subject: [PATCH v2] doc: fix testpmd sample qinq flow rules > > In the Testpmd Flow rules management section, correct the TPID values in the > Sample QinQ flow rules sub section. > Also replace the keyword qinq_strip with extend in the vlan set command. > > Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands") > Cc: stable@dpdk.org > > Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> > --- > doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst > b/doc/guides/testpmd_app_ug/testpmd_funcs.rst > index 9be4500..6a00245 100644 > --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst > +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst > @@ -4426,14 +4426,14 @@ Sample QinQ flow rules Before creating QinQ > rule(s) the following commands should be issued to enable QinQ:: > > testpmd> port stop 0 > - testpmd> vlan set qinq_strip on 0 > + testpmd> vlan set extend on 0 > > The above command sets the inner and outer TPID's to 0x8100. > > To change the TPID's the following commands should be used:: > > - testpmd> vlan set outer tpid 0xa100 0 > - testpmd> vlan set inner tpid 0x9100 0 > + testpmd> vlan set outer tpid 0x88A8 0 > + testpmd> vlan set inner tpid 0x8100 0 > testpmd> port start 0 > > Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM. > -- > 2.7.4 ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-dev] [dpdk-stable] [PATCH v2] doc: fix testpmd sample qinq flow rules 2021-01-20 1:42 ` Li, Xiaoyun @ 2021-02-02 9:59 ` Ferruh Yigit 0 siblings, 0 replies; 3+ messages in thread From: Ferruh Yigit @ 2021-02-02 9:59 UTC (permalink / raw) To: Li, Xiaoyun, Iremonger, Bernard, dev@dpdk.org; +Cc: stable@dpdk.org On 1/20/2021 1:42 AM, Li, Xiaoyun wrote: >> -----Original Message----- >> From: Iremonger, Bernard <bernard.iremonger@intel.com> >> Sent: Tuesday, January 19, 2021 21:01 >> To: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com> >> Cc: Iremonger, Bernard <bernard.iremonger@intel.com>; stable@dpdk.org >> Subject: [PATCH v2] doc: fix testpmd sample qinq flow rules >> >> In the Testpmd Flow rules management section, correct the TPID values in the >> Sample QinQ flow rules sub section. >> Also replace the keyword qinq_strip with extend in the vlan set command. >> >> Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands") >> Cc: stable@dpdk.org >> >> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> > > Acked-by: Xiaoyun Li <xiaoyun.li@intel.com> > Applied to dpdk-next-net/main, thanks. ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-02-02 10:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1610623187-3631-1>
2021-01-19 13:00 ` [dpdk-dev] [PATCH v2] doc: fix testpmd sample qinq flow rules Bernard Iremonger
2021-01-20 1:42 ` Li, Xiaoyun
2021-02-02 9:59 ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.