From: "Shradha Todi" <shradha.t@samsung.com>
To: <jingoohan1@gmail.com>, <lpieralisi@kernel.org>, <kw@linux.com>,
<robh@kernel.org>, <bhelgaas@google.com>,
<krzysztof.kozlowski@linaro.org>, <alim.akhtar@samsung.com>
Cc: <linux-pci@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-samsung-soc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <pankaj.dubey@samsung.com>
Subject: RE: [PATCH] PCI: exynos: Adapt to clk_bulk_* APIs
Date: Fri, 27 Oct 2023 12:07:43 +0530 [thread overview]
Message-ID: <0b4801da08a0$18877110$49965330$@samsung.com> (raw)
In-Reply-To: <20231009062216.6729-1-shradha.t@samsung.com>
Gentle reminder to review this patch. Thanks in advance!
> -----Original Message-----
> From: Shradha Todi [mailto:shradha.t@samsung.com]
> Sent: 09 October 2023 11:52
> To: jingoohan1@gmail.com; lpieralisi@kernel.org; kw@linux.com;
> robh@kernel.org; bhelgaas@google.com; krzysztof.kozlowski@linaro.org;
> alim.akhtar@samsung.com
> Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> samsung-soc@vger.kernel.org; linux-kernel@vger.kernel.org;
> pankaj.dubey@samsung.com; Shradha Todi <shradha.t@samsung.com>
> Subject: [PATCH] PCI: exynos: Adapt to clk_bulk_* APIs
>
> There is no need to hardcode the clock info in the driver as driver can rely on
> the devicetree to supply the clocks required for the functioning of the
> peripheral. Get rid of the static clock info and obtain the platform supplied
> clocks. The total number of clocks supplied is obtained using the
> devm_clk_bulk_get_all() API and used for the rest of the clk_bulk_* APIs.
>
> Signed-off-by: Shradha Todi <shradha.t@samsung.com>
> ---
> drivers/pci/controller/dwc/pci-exynos.c | 46 ++++++-------------------
> 1 file changed, 11 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-exynos.c
> b/drivers/pci/controller/dwc/pci-exynos.c
> index 9e42cfcd99cc..023cf41fccd7 100644
> --- a/drivers/pci/controller/dwc/pci-exynos.c
> +++ b/drivers/pci/controller/dwc/pci-exynos.c
> @@ -54,8 +54,8 @@
> struct exynos_pcie {
> struct dw_pcie pci;
> void __iomem *elbi_base;
> - struct clk *clk;
> - struct clk *bus_clk;
> + struct clk_bulk_data *clks;
> + int clk_cnt;
> struct phy *phy;
> struct regulator_bulk_data supplies[2];
> };
> @@ -65,30 +65,18 @@ static int exynos_pcie_init_clk_resources(struct
> exynos_pcie *ep)
> struct device *dev = ep->pci.dev;
> int ret;
>
> - ret = clk_prepare_enable(ep->clk);
> - if (ret) {
> - dev_err(dev, "cannot enable pcie rc clock");
> + ret = devm_clk_bulk_get_all(dev, &ep->clks);
> + if (ret < 0)
> return ret;
> - }
>
> - ret = clk_prepare_enable(ep->bus_clk);
> - if (ret) {
> - dev_err(dev, "cannot enable pcie bus clock");
> - goto err_bus_clk;
> - }
> + ep->clk_cnt = ret;
>
> - return 0;
> -
> -err_bus_clk:
> - clk_disable_unprepare(ep->clk);
> -
> - return ret;
> + return clk_bulk_prepare_enable(ep->clk_cnt, ep->clks);
> }
>
> static void exynos_pcie_deinit_clk_resources(struct exynos_pcie *ep) {
> - clk_disable_unprepare(ep->bus_clk);
> - clk_disable_unprepare(ep->clk);
> + clk_bulk_disable_unprepare(ep->clk_cnt, ep->clks);
> }
>
> static void exynos_pcie_writel(void __iomem *base, u32 val, u32 reg) @@ -
> 332,17 +320,9 @@ static int exynos_pcie_probe(struct platform_device
> *pdev)
> if (IS_ERR(ep->elbi_base))
> return PTR_ERR(ep->elbi_base);
>
> - ep->clk = devm_clk_get(dev, "pcie");
> - if (IS_ERR(ep->clk)) {
> - dev_err(dev, "Failed to get pcie rc clock\n");
> - return PTR_ERR(ep->clk);
> - }
> -
> - ep->bus_clk = devm_clk_get(dev, "pcie_bus");
> - if (IS_ERR(ep->bus_clk)) {
> - dev_err(dev, "Failed to get pcie bus clock\n");
> - return PTR_ERR(ep->bus_clk);
> - }
> + ret = exynos_pcie_init_clk_resources(ep);
> + if (ret < 0)
> + return ret;
>
> ep->supplies[0].supply = "vdd18";
> ep->supplies[1].supply = "vdd10";
> @@ -351,10 +331,6 @@ static int exynos_pcie_probe(struct platform_device
> *pdev)
> if (ret)
> return ret;
>
> - ret = exynos_pcie_init_clk_resources(ep);
> - if (ret)
> - return ret;
> -
> ret = regulator_bulk_enable(ARRAY_SIZE(ep->supplies), ep-
> >supplies);
> if (ret)
> return ret;
> @@ -369,8 +345,8 @@ static int exynos_pcie_probe(struct platform_device
> *pdev)
>
> fail_probe:
> phy_exit(ep->phy);
> - exynos_pcie_deinit_clk_resources(ep);
> regulator_bulk_disable(ARRAY_SIZE(ep->supplies), ep->supplies);
> + exynos_pcie_deinit_clk_resources(ep);
>
> return ret;
> }
> --
> 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: "Shradha Todi" <shradha.t@samsung.com>
To: <jingoohan1@gmail.com>, <lpieralisi@kernel.org>, <kw@linux.com>,
<robh@kernel.org>, <bhelgaas@google.com>,
<krzysztof.kozlowski@linaro.org>, <alim.akhtar@samsung.com>
Cc: <linux-pci@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-samsung-soc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <pankaj.dubey@samsung.com>
Subject: RE: [PATCH] PCI: exynos: Adapt to clk_bulk_* APIs
Date: Fri, 27 Oct 2023 12:07:43 +0530 [thread overview]
Message-ID: <0b4801da08a0$18877110$49965330$@samsung.com> (raw)
In-Reply-To: <20231009062216.6729-1-shradha.t@samsung.com>
Gentle reminder to review this patch. Thanks in advance!
> -----Original Message-----
> From: Shradha Todi [mailto:shradha.t@samsung.com]
> Sent: 09 October 2023 11:52
> To: jingoohan1@gmail.com; lpieralisi@kernel.org; kw@linux.com;
> robh@kernel.org; bhelgaas@google.com; krzysztof.kozlowski@linaro.org;
> alim.akhtar@samsung.com
> Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> samsung-soc@vger.kernel.org; linux-kernel@vger.kernel.org;
> pankaj.dubey@samsung.com; Shradha Todi <shradha.t@samsung.com>
> Subject: [PATCH] PCI: exynos: Adapt to clk_bulk_* APIs
>
> There is no need to hardcode the clock info in the driver as driver can rely on
> the devicetree to supply the clocks required for the functioning of the
> peripheral. Get rid of the static clock info and obtain the platform supplied
> clocks. The total number of clocks supplied is obtained using the
> devm_clk_bulk_get_all() API and used for the rest of the clk_bulk_* APIs.
>
> Signed-off-by: Shradha Todi <shradha.t@samsung.com>
> ---
> drivers/pci/controller/dwc/pci-exynos.c | 46 ++++++-------------------
> 1 file changed, 11 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-exynos.c
> b/drivers/pci/controller/dwc/pci-exynos.c
> index 9e42cfcd99cc..023cf41fccd7 100644
> --- a/drivers/pci/controller/dwc/pci-exynos.c
> +++ b/drivers/pci/controller/dwc/pci-exynos.c
> @@ -54,8 +54,8 @@
> struct exynos_pcie {
> struct dw_pcie pci;
> void __iomem *elbi_base;
> - struct clk *clk;
> - struct clk *bus_clk;
> + struct clk_bulk_data *clks;
> + int clk_cnt;
> struct phy *phy;
> struct regulator_bulk_data supplies[2];
> };
> @@ -65,30 +65,18 @@ static int exynos_pcie_init_clk_resources(struct
> exynos_pcie *ep)
> struct device *dev = ep->pci.dev;
> int ret;
>
> - ret = clk_prepare_enable(ep->clk);
> - if (ret) {
> - dev_err(dev, "cannot enable pcie rc clock");
> + ret = devm_clk_bulk_get_all(dev, &ep->clks);
> + if (ret < 0)
> return ret;
> - }
>
> - ret = clk_prepare_enable(ep->bus_clk);
> - if (ret) {
> - dev_err(dev, "cannot enable pcie bus clock");
> - goto err_bus_clk;
> - }
> + ep->clk_cnt = ret;
>
> - return 0;
> -
> -err_bus_clk:
> - clk_disable_unprepare(ep->clk);
> -
> - return ret;
> + return clk_bulk_prepare_enable(ep->clk_cnt, ep->clks);
> }
>
> static void exynos_pcie_deinit_clk_resources(struct exynos_pcie *ep) {
> - clk_disable_unprepare(ep->bus_clk);
> - clk_disable_unprepare(ep->clk);
> + clk_bulk_disable_unprepare(ep->clk_cnt, ep->clks);
> }
>
> static void exynos_pcie_writel(void __iomem *base, u32 val, u32 reg) @@ -
> 332,17 +320,9 @@ static int exynos_pcie_probe(struct platform_device
> *pdev)
> if (IS_ERR(ep->elbi_base))
> return PTR_ERR(ep->elbi_base);
>
> - ep->clk = devm_clk_get(dev, "pcie");
> - if (IS_ERR(ep->clk)) {
> - dev_err(dev, "Failed to get pcie rc clock\n");
> - return PTR_ERR(ep->clk);
> - }
> -
> - ep->bus_clk = devm_clk_get(dev, "pcie_bus");
> - if (IS_ERR(ep->bus_clk)) {
> - dev_err(dev, "Failed to get pcie bus clock\n");
> - return PTR_ERR(ep->bus_clk);
> - }
> + ret = exynos_pcie_init_clk_resources(ep);
> + if (ret < 0)
> + return ret;
>
> ep->supplies[0].supply = "vdd18";
> ep->supplies[1].supply = "vdd10";
> @@ -351,10 +331,6 @@ static int exynos_pcie_probe(struct platform_device
> *pdev)
> if (ret)
> return ret;
>
> - ret = exynos_pcie_init_clk_resources(ep);
> - if (ret)
> - return ret;
> -
> ret = regulator_bulk_enable(ARRAY_SIZE(ep->supplies), ep-
> >supplies);
> if (ret)
> return ret;
> @@ -369,8 +345,8 @@ static int exynos_pcie_probe(struct platform_device
> *pdev)
>
> fail_probe:
> phy_exit(ep->phy);
> - exynos_pcie_deinit_clk_resources(ep);
> regulator_bulk_disable(ARRAY_SIZE(ep->supplies), ep->supplies);
> + exynos_pcie_deinit_clk_resources(ep);
>
> return ret;
> }
> --
> 2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-10-27 7:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20231009062222epcas5p36768b75c13c7c79965b5863521361a64@epcas5p3.samsung.com>
2023-10-09 6:22 ` [PATCH] PCI: exynos: Adapt to clk_bulk_* APIs Shradha Todi
2023-10-09 6:22 ` Shradha Todi
2023-10-27 6:37 ` Shradha Todi [this message]
2023-10-27 6:37 ` Shradha Todi
2023-10-27 8:06 ` Krzysztof Kozlowski
2023-10-27 8:06 ` Krzysztof Kozlowski
2023-11-09 17:47 ` Alim Akhtar
2023-11-09 17:47 ` Alim Akhtar
2023-11-15 6:37 ` Shradha Todi
2023-11-15 6:37 ` Shradha Todi
[not found] ` <20231027134849.GA23716@thinkpad>
2023-11-15 6:40 ` Shradha Todi
2023-11-15 6:40 ` Shradha Todi
2023-11-15 9:07 ` Marek Szyprowski
2023-11-15 9:07 ` Marek Szyprowski
[not found] ` <bbcee6bf-850b-43c0-a5d3-9d5a66b24dc5@samsung.com>
2023-11-16 6:29 ` 'Manivannan Sadhasivam'
2023-11-16 6:29 ` 'Manivannan Sadhasivam'
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='0b4801da08a0$18877110$49965330$@samsung.com' \
--to=shradha.t@samsung.com \
--cc=alim.akhtar@samsung.com \
--cc=bhelgaas@google.com \
--cc=jingoohan1@gmail.com \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=pankaj.dubey@samsung.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.