All of lore.kernel.org
 help / color / mirror / Atom feed
* Re: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem
@ 2005-04-06 11:54 Remus
  2005-04-06 12:38 ` Wang Jian
  2005-04-06 14:23 ` Wang Jian
  0 siblings, 2 replies; 3+ messages in thread
From: Remus @ 2005-04-06 11:54 UTC (permalink / raw)
  To: lartc

Hi Wang,

We specialy got two Internet connections, one is only for the OpenVPN (it is 
heavily used) and second for everthing else.
I will give a try to PREROUTING stuff  right away.

What do mean : But I don't think you need to use MARK to do policy routing. 
It's a little overkill.

Do you another suggestion than iptables/MARK?

Regards

Remus


----- Original Message ----- 
From: "Wang Jian" <lark@linux.net.cn>
To: <lartc@mailman.ds9a.nl>
Cc: "Remus" <rmocius@auste.elnet.lt>; <openvpn-users@lists.sourceforge.net>
Sent: Wednesday, April 06, 2005 12:23 PM
Subject: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem


> Hi Remus,
>
> It seems that
>
> iptables -t mangle -A POSTROUTING -o eth0 -p udp --dport 1194 -j MARK \
>    --set-mark 0x990
>
> will not take effect. (didn't you typo -A as -D?)
>
> POSTROUTING is looked up after routing decision is made. Because the
> default route is dev eth1, the output device is eth1, -o eth0 will not
> match.
>
> You should use
>
> iptables -t mangle -A PREROUTING -p udp --destination <your openvpn \
>    peer> --dport 1194 -j MARK ....
>
> But I don't think you need to use MARK to do policy routing. It's a
> little overkill.
>
> Why not simply route all traffic to your openvpn peer via device eth0?
>
>
> On Wed, 6 Apr 2005 11:51:16 +0100, "Remus" <rmocius@auste.elnet.lt> wrote:
>
>>
>> Hi folks,
>>
>> I have OpenVPN (respect for it developers) running on my FW.
>> Is has two external NICs and on internal everything is fine, except
>> I want OpenVPN (UDP port 1194) going not via default route/network 
>> interface.
>>
>> I use such commands:
>>
>> iptables -t mangle -D POSTROUTING -o eth0 -p udp --dport 1194 -j 
>> MARK --set-mark 0x990
>> ip rule add fwmark 0x990 table openvpn1
>> ip route add default via $P2 dev eth0 table openvpn1
>>
>> eth0 is FW's not default external NIC.
>>
>> I have in use very similar iptables rules for my email server (TCP ports) 
>> and etc.
>> Everything works fine.
>> What I'm doing wrong with marking/routing the UDP port?
>>
>> Regards
>>
>> Remus
>>
>
>
>
> -- 
>  lark
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
> _______________________________________________
> Openvpn-users mailing list
> Openvpn-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openvpn-users
>
> 


_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

^ permalink raw reply	[flat|nested] 3+ messages in thread
* Re: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem
  2005-04-06 11:54 [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem Remus
@ 2005-04-06 12:38 ` Wang Jian
  2005-04-06 14:23 ` Wang Jian
  1 sibling, 0 replies; 3+ messages in thread
From: Wang Jian @ 2005-04-06 12:38 UTC (permalink / raw)
  To: lartc

Hi Remus,

I means: don't use policy routing, because you can use much simpler
solution.

Example:

ip route add default via $DEFAULTGW dev eth1
ip route add xxx.xxx.xxx.xxx/32 via $ANOTHERGW dev eth0

The second, send all your traffic to IP xxx.xxx.xxx.xxx via eth0. When
your box acts as your intranet's gateway, you can SNAT or MASQUERADE on
eth0, like

iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE.


For you openvpn configuration, you can either bind openvpn to eth0's ip,
or let system chooose the IP, in most case the output interface.


On Wed, 6 Apr 2005 12:54:53 +0100, "Remus" <rmocius@auste.elnet.lt> wrote:

> Hi Wang,
> 
> We specialy got two Internet connections, one is only for the OpenVPN (it is 
> heavily used) and second for everthing else.
> I will give a try to PREROUTING stuff  right away.
> 
> What do mean : But I don't think you need to use MARK to do policy routing. 
> It's a little overkill.
> 
> Do you another suggestion than iptables/MARK?
> 
> Regards
> 
> Remus
> 
> 
> ----- Original Message ----- 
> From: "Wang Jian" <lark@linux.net.cn>
> To: <lartc@mailman.ds9a.nl>
> Cc: "Remus" <rmocius@auste.elnet.lt>; <openvpn-users@lists.sourceforge.net>
> Sent: Wednesday, April 06, 2005 12:23 PM
> Subject: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem
> 
> 
> > Hi Remus,
> >
> > It seems that
> >
> > iptables -t mangle -A POSTROUTING -o eth0 -p udp --dport 1194 -j MARK \
> >    --set-mark 0x990
> >
> > will not take effect. (didn't you typo -A as -D?)
> >
> > POSTROUTING is looked up after routing decision is made. Because the
> > default route is dev eth1, the output device is eth1, -o eth0 will not
> > match.
> >
> > You should use
> >
> > iptables -t mangle -A PREROUTING -p udp --destination <your openvpn \
> >    peer> --dport 1194 -j MARK ....
> >
> > But I don't think you need to use MARK to do policy routing. It's a
> > little overkill.
> >
> > Why not simply route all traffic to your openvpn peer via device eth0?
> >
> >
> > On Wed, 6 Apr 2005 11:51:16 +0100, "Remus" <rmocius@auste.elnet.lt> wrote:
> >
> >>
> >> Hi folks,
> >>
> >> I have OpenVPN (respect for it developers) running on my FW.
> >> Is has two external NICs and on internal everything is fine, except
> >> I want OpenVPN (UDP port 1194) going not via default route/network 
> >> interface.
> >>
> >> I use such commands:
> >>
> >> iptables -t mangle -D POSTROUTING -o eth0 -p udp --dport 1194 -j 
> >> MARK --set-mark 0x990
> >> ip rule add fwmark 0x990 table openvpn1
> >> ip route add default via $P2 dev eth0 table openvpn1
> >>
> >> eth0 is FW's not default external NIC.
> >>
> >> I have in use very similar iptables rules for my email server (TCP ports) 
> >> and etc.
> >> Everything works fine.
> >> What I'm doing wrong with marking/routing the UDP port?
> >>
> >> Regards
> >>
> >> Remus
> >>
> >
> >
> >
> > -- 
> >  lark
> >
> >
> >
> > -------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT Products from real users.
> > Discover which products truly live up to the hype. Start reading now.
> > http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
> > _______________________________________________
> > Openvpn-users mailing list
> > Openvpn-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/openvpn-users
> >
> > 
> 
> 
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc



-- 
  lark

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

^ permalink raw reply	[flat|nested] 3+ messages in thread
* Re: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem
  2005-04-06 11:54 [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem Remus
  2005-04-06 12:38 ` Wang Jian
@ 2005-04-06 14:23 ` Wang Jian
  1 sibling, 0 replies; 3+ messages in thread
From: Wang Jian @ 2005-04-06 14:23 UTC (permalink / raw)
  To: lartc

Hi John E. Peterson,

Yes. My stupid typo.

On Wed, 6 Apr 2005 10:08:20 -0400, "John E. Peterson" <jpeterson@ivs2.com> wrote:

> Did you mean POSTROUTING to PREROUTING?  That looked wierd.
> 
> ----- Original Message ----- 
> From: "Wang Jian" <lark@linux.net.cn>
> To: "Remus" <rmocius@auste.elnet.lt>
> Cc: <lartc@mailman.ds9a.nl>; <openvpn-users@lists.sourceforge.net>
> Sent: Wednesday, April 06, 2005 10:03 AM
> Subject: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem
> 
> 
> > Hi Remus,
> >
> >
> > On Wed, 6 Apr 2005 14:48:03 +0100, "Remus" <rmocius@auste.elnet.lt> wrote:
> >
> >> Wang,
> >>
> >> That solution does not suite me:
> >> >ip route add default via $DEFAULTGW dev eth1
> >> >ip route add xxx.xxx.xxx.xxx/32 via $ANOTHERGW dev eth0
> >> Because only UPD 1194 has to be routed via eth0 to OpenVPN server IP,
> >> everything else
> >> to same Ip has to go via eth1.
> >
> > I see. So you need policy routing. Change your netfilter rule from
> > POSTROUTING to POSTROUTING.
> >
> >
> >>
> >>
> >> ----- Original Message ----- 
> >> From: "Wang Jian" <lark@linux.net.cn>
> >> To: "Remus" <rmocius@auste.elnet.lt>
> >> Cc: <lartc@mailman.ds9a.nl>; <openvpn-users@lists.sourceforge.net>
> >> Sent: Wednesday, April 06, 2005 1:38 PM
> >> Subject: Re: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing
> >> problem
> >>
> >>
> >> > Hi Remus,
> >> >
> >> > I means: don't use policy routing, because you can use much simpler
> >> > solution.
> >> >
> >> > Example:
> >> >
> >> > ip route add default via $DEFAULTGW dev eth1
> >> > ip route add xxx.xxx.xxx.xxx/32 via $ANOTHERGW dev eth0
> >> >
> >> > The second, send all your traffic to IP xxx.xxx.xxx.xxx via eth0. When
> >> > your box acts as your intranet's gateway, you can SNAT or MASQUERADE on
> >> > eth0, like
> >> >
> >> > iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE.
> >> >
> >> >
> >> > For you openvpn configuration, you can either bind openvpn to eth0's 
> >> > ip,
> >> > or let system chooose the IP, in most case the output interface.
> >> >
> >> >
> >> > On Wed, 6 Apr 2005 12:54:53 +0100, "Remus" <rmocius@auste.elnet.lt> 
> >> > wrote:
> >> >
> >> >> Hi Wang,
> >> >>
> >> >> We specialy got two Internet connections, one is only for the OpenVPN 
> >> >> (it
> >> >> is
> >> >> heavily used) and second for everthing else.
> >> >> I will give a try to PREROUTING stuff  right away.
> >> >>
> >> >> What do mean : But I don't think you need to use MARK to do policy
> >> >> routing.
> >> >> It's a little overkill.
> >> >>
> >> >> Do you another suggestion than iptables/MARK?
> >> >>
> >> >> Regards
> >> >>
> >> >> Remus
> >> >>
> >> >>
> >> >> ----- Original Message ----- 
> >> >> From: "Wang Jian" <lark@linux.net.cn>
> >> >> To: <lartc@mailman.ds9a.nl>
> >> >> Cc: "Remus" <rmocius@auste.elnet.lt>;
> >> >> <openvpn-users@lists.sourceforge.net>
> >> >> Sent: Wednesday, April 06, 2005 12:23 PM
> >> >> Subject: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing
> >> >> problem
> >> >>
> >> >>
> >> >> > Hi Remus,
> >> >> >
> >> >> > It seems that
> >> >> >
> >> >> > iptables -t mangle -A POSTROUTING -o eth0 -p udp --dport 1194 -j 
> >> >> > MARK \
> >> >> >    --set-mark 0x990
> >> >> >
> >> >> > will not take effect. (didn't you typo -A as -D?)
> >> >> >
> >> >> > POSTROUTING is looked up after routing decision is made. Because the
> >> >> > default route is dev eth1, the output device is eth1, -o eth0 will 
> >> >> > not
> >> >> > match.
> >> >> >
> >> >> > You should use
> >> >> >
> >> >> > iptables -t mangle -A PREROUTING -p udp --destination <your openvpn 
> >> >> > \
> >> >> >    peer> --dport 1194 -j MARK ....
> >> >> >
> >> >> > But I don't think you need to use MARK to do policy routing. It's a
> >> >> > little overkill.
> >> >> >
> >> >> > Why not simply route all traffic to your openvpn peer via device 
> >> >> > eth0?
> >> >> >
> >> >> >
> >> >> > On Wed, 6 Apr 2005 11:51:16 +0100, "Remus" <rmocius@auste.elnet.lt>
> >> >> > wrote:
> >> >> >
> >> >> >>
> >> >> >> Hi folks,
> >> >> >>
> >> >> >> I have OpenVPN (respect for it developers) running on my FW.
> >> >> >> Is has two external NICs and on internal everything is fine, except
> >> >> >> I want OpenVPN (UDP port 1194) going not via default route/network
> >> >> >> interface.
> >> >> >>
> >> >> >> I use such commands:
> >> >> >>
> >> >> >> iptables -t mangle -D POSTROUTING -o eth0 -p udp --dport 1194 -j
> >> >> >> MARK --set-mark 0x990
> >> >> >> ip rule add fwmark 0x990 table openvpn1
> >> >> >> ip route add default via $P2 dev eth0 table openvpn1
> >> >> >>
> >> >> >> eth0 is FW's not default external NIC.
> >> >> >>
> >> >> >> I have in use very similar iptables rules for my email server (TCP
> >> >> >> ports)
> >> >> >> and etc.
> >> >> >> Everything works fine.
> >> >> >> What I'm doing wrong with marking/routing the UDP port?
> >> >> >>
> >> >> >> Regards
> >> >> >>
> >> >> >> Remus
> >> >> >>
> >> >> >
> >> >> >
> >> >> >
> >> >> > -- 
> >> >> >  lark
> >> >> >
> >> >> >
> >> >> >
> >> >> > -------------------------------------------------------
> >> >> > SF email is sponsored by - The IT Product Guide
> >> >> > Read honest & candid reviews on hundreds of IT Products from real
> >> >> > users.
> >> >> > Discover which products truly live up to the hype. Start reading 
> >> >> > now.
> >> >> > http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
> >> >> > _______________________________________________
> >> >> > Openvpn-users mailing list
> >> >> > Openvpn-users@lists.sourceforge.net
> >> >> > https://lists.sourceforge.net/lists/listinfo/openvpn-users
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> LARTC mailing list
> >> >> LARTC@mailman.ds9a.nl
> >> >> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
> >> >
> >> >
> >> >
> >> > -- 
> >> >  lark
> >> >
> >> >
> >> >
> >> > -------------------------------------------------------
> >> > SF email is sponsored by - The IT Product Guide
> >> > Read honest & candid reviews on hundreds of IT Products from real 
> >> > users.
> >> > Discover which products truly live up to the hype. Start reading now.
> >> > http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
> >> > _______________________________________________
> >> > Openvpn-users mailing list
> >> > Openvpn-users@lists.sourceforge.net
> >> > https://lists.sourceforge.net/lists/listinfo/openvpn-users
> >> >
> >> >
> >>
> >
> >
> >
> > -- 
> >  lark
> >
> >
> >
> > -------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT Products from real users.
> > Discover which products truly live up to the hype. Start reading now.
> > http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
> > _______________________________________________
> > Openvpn-users mailing list
> > Openvpn-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/openvpn-users
> > 



-- 
  lark

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-04-06 14:23 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-06 11:54 [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem Remus
2005-04-06 12:38 ` Wang Jian
2005-04-06 14:23 ` Wang Jian

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.