Re: [RFC][PATCH 5/5] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module

[Marc Zyngier <maz@kernel.org>]

Hi John,

+Will for the SMMU part.

On 2020-06-16 07:13, John Stultz wrote:
> Allow the qcom_scm driver to be loadable as a
> permenent module.
> 
> Cc: Andy Gross <agross@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Lina Iyer <ilina@codeaurora.org>
> Cc: Saravana Kannan <saravanak@google.com>
> Cc: Todd Kjos <tkjos@google.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: iommu@lists.linux-foundation.org
> Cc: linux-gpio@vger.kernel.org
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
>  drivers/firmware/Kconfig    | 2 +-
>  drivers/firmware/Makefile   | 3 ++-
>  drivers/firmware/qcom_scm.c | 4 ++++
>  drivers/iommu/Kconfig       | 2 ++
>  4 files changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index fbd785dd0513..9e533a462bf4 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -236,7 +236,7 @@ config INTEL_STRATIX10_RSU
>  	  Say Y here if you want Intel RSU support.
> 
>  config QCOM_SCM
> -	bool
> +	tristate "Qcom SCM driver"
>  	depends on ARM || ARM64
>  	select RESET_CONTROLLER
> 
> diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
> index 99510be9f5ed..cf24d674216b 100644
> --- a/drivers/firmware/Makefile
> +++ b/drivers/firmware/Makefile
> @@ -17,7 +17,8 @@ obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
>  obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
>  obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
>  obj-$(CONFIG_FW_CFG_SYSFS)	+= qemu_fw_cfg.o
> -obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
> +obj-$(CONFIG_QCOM_SCM)		+= qcom-scm.o
> +qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
>  obj-$(CONFIG_TI_SCI_PROTOCOL)	+= ti_sci.o
>  obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
>  obj-$(CONFIG_TURRIS_MOX_RWTM)	+= turris-mox-rwtm.o
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index 0e7233a20f34..b5e88bf66975 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -1155,6 +1155,7 @@ static const struct of_device_id 
> qcom_scm_dt_match[] = {
>  	{ .compatible = "qcom,scm" },
>  	{}
>  };
> +MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);
> 
>  static struct platform_driver qcom_scm_driver = {
>  	.driver = {
> @@ -1170,3 +1171,6 @@ static int __init qcom_scm_init(void)
>  	return platform_driver_register(&qcom_scm_driver);
>  }
>  subsys_initcall(qcom_scm_init);
> +
> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. SCM driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index b510f67dfa49..714893535dd2 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -381,6 +381,7 @@ config SPAPR_TCE_IOMMU
>  config ARM_SMMU
>  	tristate "ARM Ltd. System MMU (SMMU) Support"
>  	depends on (ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64)) && 
> MMU
> +	depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y

This looks a bit ugly. Could you explain why we need this at the SMMU 
level? I'd have expected the dependency to flow the other way around...

>  	select IOMMU_API
>  	select IOMMU_IO_PGTABLE_LPAE
>  	select ARM_DMA_USE_IOMMU if ARM
> @@ -500,6 +501,7 @@ config QCOM_IOMMU
>  	# Note: iommu drivers cannot (yet?) be built as modules
>  	bool "Qualcomm IOMMU Support"
>  	depends on ARCH_QCOM || (COMPILE_TEST && !GENERIC_ATOMIC64)
> +	depends on QCOM_SCM=y
>  	select IOMMU_API
>  	select IOMMU_IO_PGTABLE_LPAE
>  	select ARM_DMA_USE_IOMMU

Thanks,

         M.
-- 
Jazz is not dead. It just smells funny...