Re: [PATCH 22/33] serial: 8250: extract serial8250_set_ier()

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

[-- Attachment #1: Type: text/plain, Size: 2387 bytes --]

On Wed, 11 Jun 2025, Jiri Slaby (SUSE) wrote:

> serial8250_do_set_termios() consists of many registers and up flags
> settings. Extract all these into separate functions. This time, setting
> of IER.
> 
> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
> ---
>  drivers/tty/serial/8250/8250_port.c | 31 ++++++++++++++++-------------
>  1 file changed, 17 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> index 6bb7f004d607..2c045a4369fc 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -2752,6 +2752,22 @@ static void serial8250_set_errors_and_ignores(struct uart_port *port, struct kte
>  		port->ignore_status_mask |= UART_LSR_DR;
>  }
>  
> +static void serial8250_set_ier(struct uart_port *port, struct ktermios *termios)
> +{
> +	struct uart_8250_port *up = up_to_u8250p(port);
> +
> +	/* CTS flow control flag and modem status interrupts */
> +	up->ier &= ~UART_IER_MSI;
> +	if (!(up->bugs & UART_BUG_NOMSR) && UART_ENABLE_MS(&up->port, termios->c_cflag))
> +		up->ier |= UART_IER_MSI;
> +	if (up->capabilities & UART_CAP_UUE)
> +		up->ier |= UART_IER_UUE;
> +	if (up->capabilities & UART_CAP_RTOIE)
> +		up->ier |= UART_IER_RTOIE;
> +
> +	serial_port_out(port, UART_IER, up->ier);
> +}
> +
>  void
>  serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
>  		          const struct ktermios *old)
> @@ -2780,20 +2796,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
>  	serial8250_set_afe(port, termios);
>  	uart_update_timeout(port, termios->c_cflag, baud);
>  	serial8250_set_errors_and_ignores(port, termios);
> -
> -	/*
> -	 * CTS flow control flag and modem status interrupts
> -	 */
> -	up->ier &= ~UART_IER_MSI;
> -	if (!(up->bugs & UART_BUG_NOMSR) &&
> -			UART_ENABLE_MS(&up->port, termios->c_cflag))
> -		up->ier |= UART_IER_MSI;
> -	if (up->capabilities & UART_CAP_UUE)
> -		up->ier |= UART_IER_UUE;
> -	if (up->capabilities & UART_CAP_RTOIE)
> -		up->ier |= UART_IER_RTOIE;
> -
> -	serial_port_out(port, UART_IER, up->ier);
> +	serial8250_set_ier(port, termios);
>  
>  	if (up->capabilities & UART_CAP_EFR) {
>  		unsigned char efr = 0;
> 

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

-- 
 i.