From: "Alim Akhtar" <alim.akhtar@samsung.com>
To: "'Aakarsh Jain'" <aakarsh.jain@samsung.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: <m.szyprowski@samsung.com>, <andrzej.hajda@intel.com>,
<mchehab@kernel.org>, <hverkuil-cisco@xs4all.nl>,
<krzysztof.kozlowski+dt@linaro.org>, <dillon.minfei@gmail.com>,
<david.plowman@raspberrypi.com>, <mark.rutland@arm.com>,
<robh+dt@kernel.org>, <conor+dt@kernel.org>,
<linux-samsung-soc@vger.kernel.org>, <andi@etezian.org>,
<gost.dev@samsung.com>, <aswani.reddy@samsung.com>,
<pankaj.dubey@samsung.com>, <ajaykumar.rs@samsung.com>,
<linux-fsd@tesla.com>,
"'Smitha T Murthy'" <smithatmurthy@gmail.com>
Subject: RE: [Patch v4 02/11] media: s5p-mfc: Rename IS_MFCV10 macro
Date: Thu, 16 Nov 2023 10:30:00 +0530 [thread overview]
Message-ID: <0d2801da1849$c34ddc70$49e99550$@samsung.com> (raw)
In-Reply-To: <20231025102216.50480-3-aakarsh.jain@samsung.com>
Hi Aakarsh
> -----Original Message-----
> From: Aakarsh Jain <aakarsh.jain@samsung.com>
> Sent: Wednesday, October 25, 2023 3:52 PM
> To: linux-arm-kernel@lists.infradead.org; linux-media@vger.kernel.org;
> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> Cc: m.szyprowski@samsung.com; andrzej.hajda@intel.com;
> mchehab@kernel.org; hverkuil-cisco@xs4all.nl;
> krzysztof.kozlowski+dt@linaro.org; dillon.minfei@gmail.com;
> david.plowman@raspberrypi.com; mark.rutland@arm.com;
> robh+dt@kernel.org; conor+dt@kernel.org; linux-samsung-
> soc@vger.kernel.org; andi@etezian.org; gost.dev@samsung.com;
> alim.akhtar@samsung.com; aswani.reddy@samsung.com;
> pankaj.dubey@samsung.com; ajaykumar.rs@samsung.com;
> aakarsh.jain@samsung.com; linux-fsd@tesla.com; Smitha T Murthy
> <smithatmurthy@gmail.com>
> Subject: [Patch v4 02/11] media: s5p-mfc: Rename IS_MFCV10 macro
>
> Renames macro IS_MFCV10 to IS_MFCV10_PLUS so that the MFCv10 code
> can be resued for MFCv12 support. Since some part of MFCv10 specific code
> holds good for MFCv12 also.
>
> Cc: linux-fsd@tesla.com
> Signed-off-by: Smitha T Murthy <smithatmurthy@gmail.com>
> Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> .../platform/samsung/s5p-mfc/s5p_mfc_common.h | 10 +++----
> .../platform/samsung/s5p-mfc/s5p_mfc_ctrl.c | 2 +-
> .../platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c | 28 +++++++++----------
> 3 files changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h
> b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h
> index 5304f42c8c72..e6ec4a43b290 100644
> --- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h
> +++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h
> @@ -771,11 +771,11 @@ void s5p_mfc_cleanup_queue(struct list_head *lh,
> struct vb2_queue *vq);
> #define HAS_PORTNUM(dev) (dev ? (dev->variant ? \
> (dev->variant->port_num ? 1 : 0) : 0) : 0)
> #define IS_TWOPORT(dev) (dev->variant->port_num == 2 ? 1 : 0)
> -#define IS_MFCV6_PLUS(dev) (dev->variant->version >= 0x60 ? 1 :
> 0)
> -#define IS_MFCV7_PLUS(dev) (dev->variant->version >= 0x70 ? 1 :
> 0)
> -#define IS_MFCV8_PLUS(dev) (dev->variant->version >= 0x80 ? 1 :
> 0)
> -#define IS_MFCV10(dev) (dev->variant->version >= 0xA0 ? 1 :
> 0)
> -#define FW_HAS_E_MIN_SCRATCH_BUF(dev) (IS_MFCV10(dev))
> +#define IS_MFCV6_PLUS(dev) (dev->variant->version >= 0x60)
> +#define IS_MFCV7_PLUS(dev) (dev->variant->version >= 0x70)
> +#define IS_MFCV8_PLUS(dev) (dev->variant->version >= 0x80)
> +#define IS_MFCV10_PLUS(dev) (dev->variant->version >= 0xA0)
> +#define FW_HAS_E_MIN_SCRATCH_BUF(dev) (IS_MFCV10_PLUS(dev))
>
> #define MFC_V5_BIT BIT(0)
> #define MFC_V6_BIT BIT(1)
> diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
> b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
> index 6d3c92045c05..54b54b2fa9b1 100644
> --- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
> +++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
> @@ -236,7 +236,7 @@ int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
> else
> mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
>
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_write(dev, 0x0, S5P_FIMV_MFC_CLOCK_OFF_V10);
>
> mfc_debug(2, "Will now wait for completion of firmware
> transfer\n"); diff --git a/drivers/media/platform/samsung/s5p-
> mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/samsung/s5p-
> mfc/s5p_mfc_opr_v6.c
> index c0df5ac9fcff..882166e4ac50 100644
> --- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c
> +++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c
> @@ -72,9 +72,9 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> ctx->luma_size, ctx->chroma_size, ctx->mv_size);
> mfc_debug(2, "Totals bufs: %d\n", ctx->total_dpb_count);
> } else if (ctx->type == MFCINST_ENCODER) {
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev))
> ctx->tmv_buffer_size = 0;
> - } else if (IS_MFCV8_PLUS(dev))
> + else if (IS_MFCV8_PLUS(dev))
> ctx->tmv_buffer_size =
> S5P_FIMV_NUM_TMV_BUFFERS_V6 *
>
> ALIGN(S5P_FIMV_TMV_BUFFER_SIZE_V8(mb_width, mb_height),
> S5P_FIMV_TMV_BUFFER_ALIGN_V6);
> @@ -82,7 +82,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> ctx->tmv_buffer_size =
> S5P_FIMV_NUM_TMV_BUFFERS_V6 *
>
> ALIGN(S5P_FIMV_TMV_BUFFER_SIZE_V6(mb_width, mb_height),
> S5P_FIMV_TMV_BUFFER_ALIGN_V6);
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> lcu_width = S5P_MFC_LCU_WIDTH(ctx->img_width);
> lcu_height = S5P_MFC_LCU_HEIGHT(ctx-
> >img_height);
> if (ctx->codec_mode !=
> S5P_FIMV_CODEC_HEVC_ENC) { @@ -133,7 +133,7 @@ static int
> s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> switch (ctx->codec_mode) {
> case S5P_MFC_CODEC_H264_DEC:
> case S5P_MFC_CODEC_H264_MVC_DEC:
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_debug(2, "Use min scratch buffer size\n");
> else if (IS_MFCV8_PLUS(dev))
> ctx->scratch_buf_size =
> @@ -152,7 +152,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> (ctx->mv_count * ctx->mv_size);
> break;
> case S5P_MFC_CODEC_MPEG4_DEC:
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_debug(2, "Use min scratch buffer size\n");
> else if (IS_MFCV7_PLUS(dev)) {
> ctx->scratch_buf_size =
> @@ -172,7 +172,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> break;
> case S5P_MFC_CODEC_VC1RCV_DEC:
> case S5P_MFC_CODEC_VC1_DEC:
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_debug(2, "Use min scratch buffer size\n");
> else
> ctx->scratch_buf_size =
> @@ -189,7 +189,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> ctx->bank2.size = 0;
> break;
> case S5P_MFC_CODEC_H263_DEC:
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_debug(2, "Use min scratch buffer size\n");
> else
> ctx->scratch_buf_size =
> @@ -201,7 +201,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> ctx->bank1.size = ctx->scratch_buf_size;
> break;
> case S5P_MFC_CODEC_VP8_DEC:
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_debug(2, "Use min scratch buffer size\n");
> else if (IS_MFCV8_PLUS(dev))
> ctx->scratch_buf_size =
> @@ -230,7 +230,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> DEC_VP9_STATIC_BUFFER_SIZE;
> break;
> case S5P_MFC_CODEC_H264_ENC:
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> mfc_debug(2, "Use min scratch buffer size\n");
> ctx->me_buffer_size =
> ALIGN(ENC_V100_H264_ME_SIZE(mb_width,
> mb_height), 16); @@ -254,7 +254,7 @@ static int
> s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> break;
> case S5P_MFC_CODEC_MPEG4_ENC:
> case S5P_MFC_CODEC_H263_ENC:
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> mfc_debug(2, "Use min scratch buffer size\n");
> ctx->me_buffer_size =
>
> ALIGN(ENC_V100_MPEG4_ME_SIZE(mb_width,
> @@ -273,7 +273,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> ctx->bank2.size = 0;
> break;
> case S5P_MFC_CODEC_VP8_ENC:
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> mfc_debug(2, "Use min scratch buffer size\n");
> ctx->me_buffer_size =
> ALIGN(ENC_V100_VP8_ME_SIZE(mb_width,
> mb_height), @@ -452,7 +452,7 @@ static void
> s5p_mfc_dec_calc_dpb_size_v6(struct s5p_mfc_ctx *ctx)
>
> if (ctx->codec_mode == S5P_MFC_CODEC_H264_DEC ||
> ctx->codec_mode ==
> S5P_MFC_CODEC_H264_MVC_DEC) {
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> ctx->mv_size = S5P_MFC_DEC_MV_SIZE_V10(ctx-
> >img_width,
> ctx->img_height);
> } else {
> @@ -668,7 +668,7 @@ static int s5p_mfc_set_enc_ref_buffer_v6(struct
> s5p_mfc_ctx *ctx)
>
> mfc_debug(2, "Buf1: %p (%d)\n", (void *)buf_addr1, buf_size1);
>
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> /* start address of per buffer is aligned */
> for (i = 0; i < ctx->pb_count; i++) {
> writel(buf_addr1, mfc_regs->e_luma_dpb + (4 * i));
> @@ -2455,7 +2455,7 @@ const struct s5p_mfc_regs
> *s5p_mfc_init_regs_v6_plus(struct s5p_mfc_dev *dev)
> R(e_h264_options, S5P_FIMV_E_H264_OPTIONS_V8);
> R(e_min_scratch_buffer_size,
> S5P_FIMV_E_MIN_SCRATCH_BUFFER_SIZE_V8);
>
> - if (!IS_MFCV10(dev))
> + if (!IS_MFCV10_PLUS(dev))
> goto done;
>
> /* Initialize registers used in MFC v10 only.
> --
> 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: "Alim Akhtar" <alim.akhtar@samsung.com>
To: "'Aakarsh Jain'" <aakarsh.jain@samsung.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: <m.szyprowski@samsung.com>, <andrzej.hajda@intel.com>,
<mchehab@kernel.org>, <hverkuil-cisco@xs4all.nl>,
<krzysztof.kozlowski+dt@linaro.org>, <dillon.minfei@gmail.com>,
<david.plowman@raspberrypi.com>, <mark.rutland@arm.com>,
<robh+dt@kernel.org>, <conor+dt@kernel.org>,
<linux-samsung-soc@vger.kernel.org>, <andi@etezian.org>,
<gost.dev@samsung.com>, <aswani.reddy@samsung.com>,
<pankaj.dubey@samsung.com>, <ajaykumar.rs@samsung.com>,
<linux-fsd@tesla.com>,
"'Smitha T Murthy'" <smithatmurthy@gmail.com>
Subject: RE: [Patch v4 02/11] media: s5p-mfc: Rename IS_MFCV10 macro
Date: Thu, 16 Nov 2023 10:30:00 +0530 [thread overview]
Message-ID: <0d2801da1849$c34ddc70$49e99550$@samsung.com> (raw)
In-Reply-To: <20231025102216.50480-3-aakarsh.jain@samsung.com>
Hi Aakarsh
> -----Original Message-----
> From: Aakarsh Jain <aakarsh.jain@samsung.com>
> Sent: Wednesday, October 25, 2023 3:52 PM
> To: linux-arm-kernel@lists.infradead.org; linux-media@vger.kernel.org;
> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> Cc: m.szyprowski@samsung.com; andrzej.hajda@intel.com;
> mchehab@kernel.org; hverkuil-cisco@xs4all.nl;
> krzysztof.kozlowski+dt@linaro.org; dillon.minfei@gmail.com;
> david.plowman@raspberrypi.com; mark.rutland@arm.com;
> robh+dt@kernel.org; conor+dt@kernel.org; linux-samsung-
> soc@vger.kernel.org; andi@etezian.org; gost.dev@samsung.com;
> alim.akhtar@samsung.com; aswani.reddy@samsung.com;
> pankaj.dubey@samsung.com; ajaykumar.rs@samsung.com;
> aakarsh.jain@samsung.com; linux-fsd@tesla.com; Smitha T Murthy
> <smithatmurthy@gmail.com>
> Subject: [Patch v4 02/11] media: s5p-mfc: Rename IS_MFCV10 macro
>
> Renames macro IS_MFCV10 to IS_MFCV10_PLUS so that the MFCv10 code
> can be resued for MFCv12 support. Since some part of MFCv10 specific code
> holds good for MFCv12 also.
>
> Cc: linux-fsd@tesla.com
> Signed-off-by: Smitha T Murthy <smithatmurthy@gmail.com>
> Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> .../platform/samsung/s5p-mfc/s5p_mfc_common.h | 10 +++----
> .../platform/samsung/s5p-mfc/s5p_mfc_ctrl.c | 2 +-
> .../platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c | 28 +++++++++----------
> 3 files changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h
> b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h
> index 5304f42c8c72..e6ec4a43b290 100644
> --- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h
> +++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h
> @@ -771,11 +771,11 @@ void s5p_mfc_cleanup_queue(struct list_head *lh,
> struct vb2_queue *vq);
> #define HAS_PORTNUM(dev) (dev ? (dev->variant ? \
> (dev->variant->port_num ? 1 : 0) : 0) : 0)
> #define IS_TWOPORT(dev) (dev->variant->port_num == 2 ? 1 : 0)
> -#define IS_MFCV6_PLUS(dev) (dev->variant->version >= 0x60 ? 1 :
> 0)
> -#define IS_MFCV7_PLUS(dev) (dev->variant->version >= 0x70 ? 1 :
> 0)
> -#define IS_MFCV8_PLUS(dev) (dev->variant->version >= 0x80 ? 1 :
> 0)
> -#define IS_MFCV10(dev) (dev->variant->version >= 0xA0 ? 1 :
> 0)
> -#define FW_HAS_E_MIN_SCRATCH_BUF(dev) (IS_MFCV10(dev))
> +#define IS_MFCV6_PLUS(dev) (dev->variant->version >= 0x60)
> +#define IS_MFCV7_PLUS(dev) (dev->variant->version >= 0x70)
> +#define IS_MFCV8_PLUS(dev) (dev->variant->version >= 0x80)
> +#define IS_MFCV10_PLUS(dev) (dev->variant->version >= 0xA0)
> +#define FW_HAS_E_MIN_SCRATCH_BUF(dev) (IS_MFCV10_PLUS(dev))
>
> #define MFC_V5_BIT BIT(0)
> #define MFC_V6_BIT BIT(1)
> diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
> b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
> index 6d3c92045c05..54b54b2fa9b1 100644
> --- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
> +++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
> @@ -236,7 +236,7 @@ int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
> else
> mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
>
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_write(dev, 0x0, S5P_FIMV_MFC_CLOCK_OFF_V10);
>
> mfc_debug(2, "Will now wait for completion of firmware
> transfer\n"); diff --git a/drivers/media/platform/samsung/s5p-
> mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/samsung/s5p-
> mfc/s5p_mfc_opr_v6.c
> index c0df5ac9fcff..882166e4ac50 100644
> --- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c
> +++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c
> @@ -72,9 +72,9 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> ctx->luma_size, ctx->chroma_size, ctx->mv_size);
> mfc_debug(2, "Totals bufs: %d\n", ctx->total_dpb_count);
> } else if (ctx->type == MFCINST_ENCODER) {
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev))
> ctx->tmv_buffer_size = 0;
> - } else if (IS_MFCV8_PLUS(dev))
> + else if (IS_MFCV8_PLUS(dev))
> ctx->tmv_buffer_size =
> S5P_FIMV_NUM_TMV_BUFFERS_V6 *
>
> ALIGN(S5P_FIMV_TMV_BUFFER_SIZE_V8(mb_width, mb_height),
> S5P_FIMV_TMV_BUFFER_ALIGN_V6);
> @@ -82,7 +82,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> ctx->tmv_buffer_size =
> S5P_FIMV_NUM_TMV_BUFFERS_V6 *
>
> ALIGN(S5P_FIMV_TMV_BUFFER_SIZE_V6(mb_width, mb_height),
> S5P_FIMV_TMV_BUFFER_ALIGN_V6);
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> lcu_width = S5P_MFC_LCU_WIDTH(ctx->img_width);
> lcu_height = S5P_MFC_LCU_HEIGHT(ctx-
> >img_height);
> if (ctx->codec_mode !=
> S5P_FIMV_CODEC_HEVC_ENC) { @@ -133,7 +133,7 @@ static int
> s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> switch (ctx->codec_mode) {
> case S5P_MFC_CODEC_H264_DEC:
> case S5P_MFC_CODEC_H264_MVC_DEC:
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_debug(2, "Use min scratch buffer size\n");
> else if (IS_MFCV8_PLUS(dev))
> ctx->scratch_buf_size =
> @@ -152,7 +152,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> (ctx->mv_count * ctx->mv_size);
> break;
> case S5P_MFC_CODEC_MPEG4_DEC:
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_debug(2, "Use min scratch buffer size\n");
> else if (IS_MFCV7_PLUS(dev)) {
> ctx->scratch_buf_size =
> @@ -172,7 +172,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> break;
> case S5P_MFC_CODEC_VC1RCV_DEC:
> case S5P_MFC_CODEC_VC1_DEC:
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_debug(2, "Use min scratch buffer size\n");
> else
> ctx->scratch_buf_size =
> @@ -189,7 +189,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> ctx->bank2.size = 0;
> break;
> case S5P_MFC_CODEC_H263_DEC:
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_debug(2, "Use min scratch buffer size\n");
> else
> ctx->scratch_buf_size =
> @@ -201,7 +201,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> ctx->bank1.size = ctx->scratch_buf_size;
> break;
> case S5P_MFC_CODEC_VP8_DEC:
> - if (IS_MFCV10(dev))
> + if (IS_MFCV10_PLUS(dev))
> mfc_debug(2, "Use min scratch buffer size\n");
> else if (IS_MFCV8_PLUS(dev))
> ctx->scratch_buf_size =
> @@ -230,7 +230,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> DEC_VP9_STATIC_BUFFER_SIZE;
> break;
> case S5P_MFC_CODEC_H264_ENC:
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> mfc_debug(2, "Use min scratch buffer size\n");
> ctx->me_buffer_size =
> ALIGN(ENC_V100_H264_ME_SIZE(mb_width,
> mb_height), 16); @@ -254,7 +254,7 @@ static int
> s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> break;
> case S5P_MFC_CODEC_MPEG4_ENC:
> case S5P_MFC_CODEC_H263_ENC:
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> mfc_debug(2, "Use min scratch buffer size\n");
> ctx->me_buffer_size =
>
> ALIGN(ENC_V100_MPEG4_ME_SIZE(mb_width,
> @@ -273,7 +273,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> s5p_mfc_ctx *ctx)
> ctx->bank2.size = 0;
> break;
> case S5P_MFC_CODEC_VP8_ENC:
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> mfc_debug(2, "Use min scratch buffer size\n");
> ctx->me_buffer_size =
> ALIGN(ENC_V100_VP8_ME_SIZE(mb_width,
> mb_height), @@ -452,7 +452,7 @@ static void
> s5p_mfc_dec_calc_dpb_size_v6(struct s5p_mfc_ctx *ctx)
>
> if (ctx->codec_mode == S5P_MFC_CODEC_H264_DEC ||
> ctx->codec_mode ==
> S5P_MFC_CODEC_H264_MVC_DEC) {
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> ctx->mv_size = S5P_MFC_DEC_MV_SIZE_V10(ctx-
> >img_width,
> ctx->img_height);
> } else {
> @@ -668,7 +668,7 @@ static int s5p_mfc_set_enc_ref_buffer_v6(struct
> s5p_mfc_ctx *ctx)
>
> mfc_debug(2, "Buf1: %p (%d)\n", (void *)buf_addr1, buf_size1);
>
> - if (IS_MFCV10(dev)) {
> + if (IS_MFCV10_PLUS(dev)) {
> /* start address of per buffer is aligned */
> for (i = 0; i < ctx->pb_count; i++) {
> writel(buf_addr1, mfc_regs->e_luma_dpb + (4 * i));
> @@ -2455,7 +2455,7 @@ const struct s5p_mfc_regs
> *s5p_mfc_init_regs_v6_plus(struct s5p_mfc_dev *dev)
> R(e_h264_options, S5P_FIMV_E_H264_OPTIONS_V8);
> R(e_min_scratch_buffer_size,
> S5P_FIMV_E_MIN_SCRATCH_BUFFER_SIZE_V8);
>
> - if (!IS_MFCV10(dev))
> + if (!IS_MFCV10_PLUS(dev))
> goto done;
>
> /* Initialize registers used in MFC v10 only.
> --
> 2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-11-16 5:00 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20231025102230epcas5p1558641a18fbf4f841c82b0ef4cf5a91f@epcas5p1.samsung.com>
2023-10-25 10:22 ` [Patch v4 00/11] Add MFC V12 support Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-10-25 10:22 ` [Patch v4 01/11] dt-bindings: media: s5p-mfc: Add mfcv12 variant Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-10-25 13:00 ` Krzysztof Kozlowski
2023-10-25 13:00 ` Krzysztof Kozlowski
2023-10-26 13:31 ` Aakarsh Jain
2023-10-26 13:31 ` Aakarsh Jain
2023-11-01 8:24 ` Krzysztof Kozlowski
2023-11-01 8:24 ` Krzysztof Kozlowski
2023-11-08 17:24 ` Alim Akhtar
2023-11-08 17:24 ` Alim Akhtar
2023-10-25 10:22 ` [Patch v4 02/11] media: s5p-mfc: Rename IS_MFCV10 macro Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-11-16 5:00 ` Alim Akhtar [this message]
2023-11-16 5:00 ` Alim Akhtar
2023-10-25 10:22 ` [Patch v4 03/11] media: s5p-mfc: Add initial support for MFCv12 Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-11-16 5:44 ` Alim Akhtar
2023-11-16 5:44 ` Alim Akhtar
2023-11-22 15:34 ` Hans Verkuil
2023-11-22 15:34 ` Hans Verkuil
2023-11-27 6:44 ` Aakarsh Jain
2023-11-27 6:44 ` Aakarsh Jain
2023-10-25 10:22 ` [Patch v4 04/11] media: s5p-mfc: Add YV12 and I420 multiplanar format support Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-11-22 15:40 ` Hans Verkuil
2023-11-22 15:40 ` Hans Verkuil
2023-11-27 7:01 ` Aakarsh Jain
2023-11-27 7:01 ` Aakarsh Jain
2023-11-23 17:25 ` Nicolas Dufresne
2023-11-23 17:25 ` Nicolas Dufresne
2023-11-27 7:00 ` Aakarsh Jain
2023-11-27 7:00 ` Aakarsh Jain
2023-10-25 10:22 ` [Patch v4 05/11] media: s5p-mfc: Add support for rate controls in MFCv12 Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-10-25 10:22 ` [Patch v4 06/11] media: s5p-mfc: Add support for UHD encoding Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-10-25 10:22 ` [Patch v4 07/11] media: s5p-mfc: Add support for DMABUF for encoder Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-10-25 10:22 ` [Patch v4 08/11] media: s5p-mfc: Set context for valid case before calling try_run Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-10-25 10:22 ` [Patch v4 09/11] media: s5p-mfc: Load firmware for each run in MFCv12 Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-11-22 15:44 ` Hans Verkuil
2023-11-22 15:44 ` Hans Verkuil
2023-11-28 10:31 ` Aakarsh Jain
2023-11-28 10:31 ` Aakarsh Jain
2023-10-25 10:22 ` [Patch v4 10/11] media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-10-25 10:22 ` [Patch v4 11/11] arm64: dts: fsd: Add MFC related DT enteries Aakarsh Jain
2023-10-25 10:22 ` Aakarsh Jain
2023-11-20 12:48 ` [Patch v4 00/11] Add MFC V12 support Aakarsh Jain
2023-11-20 12:48 ` Aakarsh Jain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='0d2801da1849$c34ddc70$49e99550$@samsung.com' \
--to=alim.akhtar@samsung.com \
--cc=aakarsh.jain@samsung.com \
--cc=ajaykumar.rs@samsung.com \
--cc=andi@etezian.org \
--cc=andrzej.hajda@intel.com \
--cc=aswani.reddy@samsung.com \
--cc=conor+dt@kernel.org \
--cc=david.plowman@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=dillon.minfei@gmail.com \
--cc=gost.dev@samsung.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fsd@tesla.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=pankaj.dubey@samsung.com \
--cc=robh+dt@kernel.org \
--cc=smithatmurthy@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.