Re: [PATCH v2 3/3] arm: bcmbca: replace ARCH_BCM6753 symbols in Kconfig with BCM6855

[Philippe REYNES <philippe.reynes@softathome.com>]

Hi William,


Le 22/08/2022 à 20:49, William Zhang a écrit :
> As CONFIG_ARCH_BCM6753 is replaced with CONFIG_BCM6855, update the
> driver Kconfig to use the new config symbol.
>
> Signed-off-by: William Zhang <william.zhang@broadcom.com>


Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>


>
> ---
>
> Changes in v2:
> - Update subject line to be more clear for patch 3
>
>   drivers/gpio/Kconfig         | 2 +-
>   drivers/led/Kconfig          | 2 +-
>   drivers/mtd/nand/raw/Kconfig | 2 +-
>   drivers/watchdog/Kconfig     | 2 +-
>   4 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 929f3fb9eacb..d8020de969ef 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -111,7 +111,7 @@ config BCM2835_GPIO
>   config BCM6345_GPIO
>   	bool "BCM6345 GPIO driver"
>   	depends on DM_GPIO && (ARCH_BMIPS || BCM6856 || \
> -			       BCM6858 || BCM63158 || ARCH_BCM6753)
> +			       BCM6858 || BCM63158 || BCM6855)
>   	help
>   	  This driver supports the GPIO banks on BCM6345 SoCs.
>   
> diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
> index 98f015a07f97..996b757e6d00 100644
> --- a/drivers/led/Kconfig
> +++ b/drivers/led/Kconfig
> @@ -30,7 +30,7 @@ config LED_BCM6358
>   
>   config LED_BCM6753
>   	bool "LED Support for BCM6753"
> -	depends on LED && ARCH_BCM6753
> +	depends on LED && BCM6855
>   	help
>   	  This option enables support for LEDs connected to the BCM6753
>   	  HW has blinking and fading capabilities and up to 32 LEDs can be controlled.
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index f8445e09633c..d6e3eeb3c093 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -97,7 +97,7 @@ config NAND_BRCMNAND_6368
>   
>   config NAND_BRCMNAND_6753
>   	bool "Support Broadcom NAND controller on bcm6753"
> -	depends on NAND_BRCMNAND && ARCH_BCM6753
> +	depends on NAND_BRCMNAND && BCM6855
>   	help
>   	  Enable support for broadcom nand driver on bcm6753.
>   
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 84a4034fe87c..65f2d0821c60 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -129,7 +129,7 @@ config WDT_AT91
>   config WDT_BCM6345
>   	bool "BCM6345 watchdog timer support"
>   	depends on WDT && (ARCH_BMIPS || BCM6856 || \
> -			   BCM6858 || BCM63158 || ARCH_BCM6753)
> +			   BCM6858 || BCM63158 || BCM6855)
>   	help
>   	  Select this to enable watchdog timer for BCM6345 SoCs.
>   	  The watchdog timer is stopped when initialized.