From: Philippe REYNES <philippe.reynes@softathome.com>
To: William Zhang <william.zhang@broadcom.com>,
U-Boot Mailing List <u-boot@lists.denx.de>
Cc: f.fainelli@gmail.com, anand.gore@broadcom.com, rafal@milecki.pl,
dan.beygelman@broadcom.com, kursad.oney@broadcom.com,
joel.peshkin@broadcom.com,
Andre Przywara <andre.przywara@arm.com>,
Christian Hewitt <christianshewitt@gmail.com>,
Fabio Estevam <festevam@denx.de>,
Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>,
Rick Chen <rick@andestech.com>,
Samuel Holland <samuel@sholland.org>,
Sean Anderson <seanga2@gmail.com>, Simon Glass <sjg@chromium.org>,
Tom Rini <trini@konsulko.com>,
Tomer Yacoby <tomer.yacoby@broadcom.com>,
"Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>
Subject: Re: [PATCH v2 2/3] arm: bcmbca: remove bcm6753 support under CONFIG_ARCH_BCM6753
Date: Wed, 24 Aug 2022 14:42:01 +0200 [thread overview]
Message-ID: <152d8bc1-4ba7-0d7b-bc0e-e71bb5e988a1@softathome.com> (raw)
In-Reply-To: <20220822114410.v2.2.Ie2b7550f9e0a8de6b575ce18c0ddfd5208d79d5d@changeid>
Hi William,
Le 22/08/2022 à 20:49, William Zhang a écrit :
> BCM6753 is essentially same as the main chip BCM6855 but with different
> SKU number. Now that BCM6855 is supported under CONFIG_ARCH_BCMBCA and
> CONFIG_BCM6855, remove the original ARCH_BCM6753 support and migrate its
> configuration and dts settings. This includes:
> - Remove the bcm96753ref board folder. It is replaced by the
> generic bcmbca board folder.
> - Merge the 6753.dtsi setting to the new 6855.dtsi file. Update
> 96753ref board dts with the new compatible string.
> - Delete broadcom_bcm96763ref.h and merge its setting to the new
> bcm96855.h file.
> - Delete bcm96753ref_ram_defconfig and use a basic config version of
> bcm96855_defconfig
>
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
> ---
>
> (no changes since v1)
>
> arch/arm/Kconfig | 8 -
> arch/arm/dts/Makefile | 6 +-
> arch/arm/dts/bcm6753.dtsi | 208 -----------------------
> arch/arm/dts/bcm6855.dtsi | 137 +++++++++++++++
> arch/arm/dts/bcm96753ref.dts | 6 +-
> board/broadcom/bcm96753ref/Kconfig | 16 --
> board/broadcom/bcm96753ref/MAINTAINERS | 6 -
> board/broadcom/bcm96753ref/Makefile | 3 -
> board/broadcom/bcm96753ref/bcm96753ref.c | 40 -----
> configs/bcm96753ref_ram_defconfig | 87 ----------
> include/configs/bcm96855.h | 4 +
> include/configs/broadcom_bcm96753ref.h | 32 ----
> 12 files changed, 146 insertions(+), 407 deletions(-)
> delete mode 100644 arch/arm/dts/bcm6753.dtsi
> delete mode 100644 board/broadcom/bcm96753ref/Kconfig
> delete mode 100644 board/broadcom/bcm96753ref/MAINTAINERS
> delete mode 100644 board/broadcom/bcm96753ref/Makefile
> delete mode 100644 board/broadcom/bcm96753ref/bcm96753ref.c
> delete mode 100644 configs/bcm96753ref_ram_defconfig
> delete mode 100644 include/configs/broadcom_bcm96753ref.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 063616ff8d0b..c1f195e9d106 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -665,13 +665,6 @@ config ARCH_BCM283X
> imply CMD_DM
> imply FAT_WRITE
>
> -config ARCH_BCM6753
> - bool "Broadcom BCM6753 family"
> - select CPU_V7A
> - select DM
> - select OF_CONTROL
> - imply CMD_DM
> -
> config ARCH_BCMSTB
> bool "Broadcom BCM7XXX family"
> select CPU_V7A
> @@ -2267,7 +2260,6 @@ source "board/Marvell/octeontx2/Kconfig"
> source "board/armltd/vexpress/Kconfig"
> source "board/armltd/vexpress64/Kconfig"
> source "board/cortina/presidio-asic/Kconfig"
> -source "board/broadcom/bcm96753ref/Kconfig"
> source "board/broadcom/bcmns3/Kconfig"
> source "board/cavium/thunderx/Kconfig"
> source "board/eets/pdu001/Kconfig"
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 5fd38cc63b63..8fba735cc8ab 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -1147,9 +1147,6 @@ dtb-$(CONFIG_ARCH_BCM283X) += \
> bcm2837-rpi-cm3-io3.dtb \
> bcm2711-rpi-4-b.dtb
>
> -dtb-$(CONFIG_ARCH_BCM6753) += \
> - bcm96753ref.dtb
> -
> dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
>
> dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
> @@ -1177,7 +1174,8 @@ dtb-$(CONFIG_BCM6813) += \
> dtb-$(CONFIG_BCM6846) += \
> bcm96846.dtb
> dtb-$(CONFIG_BCM6855) += \
> - bcm96855.dtb
> + bcm96855.dtb \
> + bcm96753ref.dtb
> dtb-$(CONFIG_BCM6856) += \
> bcm96856.dtb \
> bcm968360bg.dtb
> diff --git a/arch/arm/dts/bcm6753.dtsi b/arch/arm/dts/bcm6753.dtsi
> deleted file mode 100644
> index e88ab095c290..000000000000
> --- a/arch/arm/dts/bcm6753.dtsi
> +++ /dev/null
> @@ -1,208 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Copyright (C) 2022 Philippe Reynes <philippe.reynes@softathome.com>
> - */
> -
> -#include "skeleton.dtsi"
> -
> -/ {
> - compatible = "brcm,bcm6753";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - u-boot,dm-pre-reloc;
> -
> - cpu0: cpu@0 {
> - compatible = "arm,cortex-a7";
> - device_type = "cpu";
> - reg = <0x0>;
> - next-level-cache = <&l2>;
> - u-boot,dm-pre-reloc;
> - };
> -
> - cpu1: cpu@1 {
> - compatible = "arm,cortex-a7";
> - device_type = "cpu";
> - reg = <0x1>;
> - next-level-cache = <&l2>;
> - u-boot,dm-pre-reloc;
> - };
> -
> - cpu2: cpu@2 {
> - compatible = "arm,cortex-a7";
> - device_type = "cpu";
> - reg = <0x2>;
> - next-level-cache = <&l2>;
> - u-boot,dm-pre-reloc;
> - };
> -
> - l2: l2-cache0 {
> - compatible = "cache";
> - u-boot,dm-pre-reloc;
> - };
> - };
> -
> - clocks {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> - u-boot,dm-pre-reloc;
> -
> - periph_osc: periph-osc {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <200000000>;
> - u-boot,dm-pre-reloc;
> - };
> -
> - hsspi_pll: hsspi-pll {
> - compatible = "fixed-factor-clock";
> - #clock-cells = <0>;
> - clocks = <&periph_osc>;
> - clock-mult = <2>;
> - clock-div = <1>;
> - };
> -
> - refclk50mhz: refclk50mhz {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <50000000>;
> - };
> - };
> -
> - ubus {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - u-boot,dm-pre-reloc;
> -
> - uart0: serial@ff812000 {
> - compatible = "arm,pl011", "arm,primecell";
> - reg = <0xff812000 0x1000>;
> - clock = <50000000>;
> -
> - status = "disabled";
> - };
> -
> - wdt1: watchdog@ff800480 {
> - compatible = "brcm,bcm6345-wdt";
> - reg = <0xff800480 0x14>;
> - clocks = <&refclk50mhz>;
> - };
> -
> - wdt2: watchdog@ff8004c0 {
> - compatible = "brcm,bcm6345-wdt";
> - reg = <0xff8004c0 0x14>;
> - clocks = <&refclk50mhz>;
> - };
> -
> - wdt-reboot {
> - compatible = "wdt-reboot";
> - wdt = <&wdt1>;
> - };
> -
> - gpio0: gpio-controller@0xff800500 {
> - compatible = "brcm,bcm6345-gpio";
> - reg = <0xff800500 0x4>,
> - <0xff800520 0x4>;
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - status = "disabled";
> - };
> -
> - gpio1: gpio-controller@0xff800504 {
> - compatible = "brcm,bcm6345-gpio";
> - reg = <0xff800504 0x4>,
> - <0xff800524 0x4>;
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - status = "disabled";
> - };
> -
> - gpio2: gpio-controller@0xff800508 {
> - compatible = "brcm,bcm6345-gpio";
> - reg = <0xff800508 0x4>,
> - <0xff800528 0x4>;
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - status = "disabled";
> - };
> -
> - gpio3: gpio-controller@0xff80050c {
> - compatible = "brcm,bcm6345-gpio";
> - reg = <0xff80050c 0x4>,
> - <0xff80052c 0x4>;
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - status = "disabled";
> - };
> -
> - gpio4: gpio-controller@0xff800510 {
> - compatible = "brcm,bcm6345-gpio";
> - reg = <0xff800510 0x4>,
> - <0xff800530 0x4>;
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - status = "disabled";
> - };
> -
> - gpio5: gpio-controller@0xff800514 {
> - compatible = "brcm,bcm6345-gpio";
> - reg = <0xff800514 0x4>,
> - <0xff800534 0x4>;
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - status = "disabled";
> - };
> -
> - gpio6: gpio-controller@0xff800518 {
> - compatible = "brcm,bcm6345-gpio";
> - reg = <0xff800518 0x4>,
> - <0xff800538 0x4>;
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - status = "disabled";
> - };
> -
> - gpio7: gpio-controller@0xff80051c {
> - compatible = "brcm,bcm6345-gpio";
> - reg = <0xff80051c 0x4>,
> - <0xff80053c 0x4>;
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - status = "disabled";
> - };
> -
> - nand: nand-controller@ff801800 {
> - compatible = "brcm,nand-bcm6753",
> - "brcm,brcmnand-v5.0",
> - "brcm,brcmnand";
> - reg-names = "nand", "nand-int-base", "nand-cache";
> - reg = <0xff801800 0x180>,
> - <0xff802000 0x10>,
> - <0xff801c00 0x200>;
> - parameter-page-big-endian = <0>;
> -
> - status = "disabled";
> - };
> -
> - leds: led-controller@ff803000 {
> - compatible = "brcm,bcm6753-leds";
> - reg = <0xff803000 0x3480>;
> -
> - status = "disabled";
> - };
> - };
> -};
> diff --git a/arch/arm/dts/bcm6855.dtsi b/arch/arm/dts/bcm6855.dtsi
> index 620f51aee1a2..05e0a4e0da7c 100644
> --- a/arch/arm/dts/bcm6855.dtsi
> +++ b/arch/arm/dts/bcm6855.dtsi
> @@ -1,5 +1,6 @@
> // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> /*
> + * Copyright (C) 2022 Philippe Reynes <philippe.reynes@softathome.com>
> * Copyright 2022 Broadcom Ltd.
> */
>
> @@ -64,6 +65,8 @@
> };
>
> clocks: clocks {
> + u-boot,dm-pre-reloc;
> +
> periph_clk: periph-clk {
> compatible = "fixed-clock";
> #clock-cells = <0>;
> @@ -77,6 +80,22 @@
> clock-div = <4>;
> clock-mult = <1>;
> };
> +
> + hsspi_pll: hsspi-pll {
> + compatible = "fixed-factor-clock";
> + #clock-cells = <0>;
> + clocks = <&periph_clk>;
> + clock-mult = <2>;
> + clock-div = <1>;
> + };
> +
> + wdt_clk: wdt-clk {
> + compatible = "fixed-factor-clock";
> + #clock-cells = <0>;
> + clocks = <&periph_clk>;
> + clock-div = <4>;
> + clock-mult = <1>;
> + };
> };
>
> psci {
> @@ -107,6 +126,7 @@
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0 0xff800000 0x800000>;
> + u-boot,dm-pre-reloc;
>
> uart0: serial@12000 {
> compatible = "arm,pl011", "arm,primecell";
> @@ -116,5 +136,122 @@
> clock-names = "uartclk", "apb_pclk";
> status = "disabled";
> };
> +
> + wdt1: watchdog@480 {
> + compatible = "brcm,bcm6345-wdt";
> + reg = <0x480 0x14>;
> + clocks = <&wdt_clk>;
> + };
> +
> + wdt2: watchdog@4c0 {
> + compatible = "brcm,bcm6345-wdt";
> + reg = <0x4c0 0x14>;
> + clocks = <&wdt_clk>;
> + };
> +
> + wdt-reboot {
> + compatible = "wdt-reboot";
> + wdt = <&wdt1>;
> + };
> +
> + gpio0: gpio-controller@500 {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x500 0x4>,
> + <0x520 0x4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + status = "disabled";
> + };
> +
> + gpio1: gpio-controller@504 {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x504 0x4>,
> + <0x524 0x4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + status = "disabled";
> + };
> +
> + gpio2: gpio-controller@508 {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x508 0x4>,
> + <0x528 0x4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + status = "disabled";
> + };
> +
> + gpio3: gpio-controller@50c {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x50c 0x4>,
> + <0x52c 0x4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + status = "disabled";
> + };
> +
> + gpio4: gpio-controller@510 {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x510 0x4>,
> + <0x530 0x4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + status = "disabled";
> + };
> +
> + gpio5: gpio-controller@514 {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x514 0x4>,
> + <0x534 0x4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + status = "disabled";
> + };
> +
> + gpio6: gpio-controller@518 {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x518 0x4>,
> + <0x538 0x4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + status = "disabled";
> + };
> +
> + gpio7: gpio-controller@51c {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x51c 0x4>,
> + <0x53c 0x4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + status = "disabled";
> + };
> +
> + nand: nand-controller@1800 {
> + compatible = "brcm,nand-bcm6753",
> + "brcm,brcmnand-v5.0",
> + "brcm,brcmnand";
> + reg-names = "nand", "nand-int-base", "nand-cache";
> + reg = <0x1800 0x180>,
> + <0x2000 0x10>,
> + <0x1c00 0x200>;
> + parameter-page-big-endian = <0>;
> +
> + status = "disabled";
> + };
> +
> + leds: led-controller@3000 {
> + compatible = "brcm,bcm6753-leds";
> + reg = <0x3000 0x3480>;
> +
> + status = "disabled";
> + };
> };
> };
> diff --git a/arch/arm/dts/bcm96753ref.dts b/arch/arm/dts/bcm96753ref.dts
> index ca15ca5f108d..f74137f18f46 100644
> --- a/arch/arm/dts/bcm96753ref.dts
> +++ b/arch/arm/dts/bcm96753ref.dts
> @@ -5,13 +5,13 @@
>
> /dts-v1/;
>
> -#include "bcm6753.dtsi"
> +#include "bcm6855.dtsi"
>
> #include <dt-bindings/gpio/gpio.h>
>
> / {
> - model = "Broadcom bcm6753ref";
> - compatible = "broadcom,bcm6753ref", "brcm,bcm6753";
> + model = "Broadcom BCM96753REF Reference Board";
> + compatible = "brcm,bcm96753ref", "brcm,bcm6855", "brcm,bcmbca";
>
> aliases {
> serial0 = &uart0;
> diff --git a/board/broadcom/bcm96753ref/Kconfig b/board/broadcom/bcm96753ref/Kconfig
> deleted file mode 100644
> index 479e7905787b..000000000000
> --- a/board/broadcom/bcm96753ref/Kconfig
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -if TARGET_BCM96753REF
> -
> -config SYS_VENDOR
> - default "broadcom"
> -
> -config SYS_BOARD
> - default "bcm96753ref"
> -
> -config SYS_CONFIG_NAME
> - default "broadcom_bcm96753ref"
> -
> -endif
> -
> -config TARGET_BCM96753REF
> - bool "Support Broadcom bcm96753ref"
> - depends on ARCH_BCM6753
> diff --git a/board/broadcom/bcm96753ref/MAINTAINERS b/board/broadcom/bcm96753ref/MAINTAINERS
> deleted file mode 100644
> index be060f5a709c..000000000000
> --- a/board/broadcom/bcm96753ref/MAINTAINERS
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -BROADCOM BCM96753REF
> -M: Philippe Reynes <philippe.reynes@softathome.com>
> -S: Maintained
> -F: board/broadcom/bcm96753ref
> -F: include/configs/broadcom_bcm96753ref.h
> -F: configs/bcm96753ref_ram_defconfig
> diff --git a/board/broadcom/bcm96753ref/Makefile b/board/broadcom/bcm96753ref/Makefile
> deleted file mode 100644
> index a1fa2bff8670..000000000000
> --- a/board/broadcom/bcm96753ref/Makefile
> +++ /dev/null
> @@ -1,3 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0+
> -
> -obj-y += bcm96753ref.o
> diff --git a/board/broadcom/bcm96753ref/bcm96753ref.c b/board/broadcom/bcm96753ref/bcm96753ref.c
> deleted file mode 100644
> index bf78d843aa57..000000000000
> --- a/board/broadcom/bcm96753ref/bcm96753ref.c
> +++ /dev/null
> @@ -1,40 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Copyright (C) 2022 Philippe Reynes <philippe.reynes@softathome.com>
> - */
> -
> -#include <common.h>
> -#include <fdtdec.h>
> -#include <linux/io.h>
> -#include <cpu_func.h>
> -
> -int board_init(void)
> -{
> - return 0;
> -}
> -
> -int dram_init(void)
> -{
> - if (fdtdec_setup_mem_size_base() != 0)
> - printf("fdtdec_setup_mem_size_base() has failed\n");
> -
> - return 0;
> -}
> -
> -int dram_init_banksize(void)
> -{
> - fdtdec_setup_memory_banksize();
> -
> - return 0;
> -}
> -
> -int print_cpuinfo(void)
> -{
> - return 0;
> -}
> -
> -void enable_caches(void)
> -{
> - icache_enable();
> - dcache_enable();
> -}
> diff --git a/configs/bcm96753ref_ram_defconfig b/configs/bcm96753ref_ram_defconfig
> deleted file mode 100644
> index 59ac1cdf7e1e..000000000000
> --- a/configs/bcm96753ref_ram_defconfig
> +++ /dev/null
> @@ -1,87 +0,0 @@
> -CONFIG_ARM=y
> -CONFIG_SKIP_LOWLEVEL_INIT=y
> -CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
> -CONFIG_SYS_ARCH_TIMER=y
> -CONFIG_ARCH_BCM6753=y
> -CONFIG_SYS_TEXT_BASE=0x1000000
> -CONFIG_SYS_MALLOC_F_LEN=0x1000
> -CONFIG_NR_DRAM_BANKS=1
> -CONFIG_ENV_SIZE=0x20000
> -CONFIG_DM_GPIO=y
> -CONFIG_DEFAULT_DEVICE_TREE="bcm96753ref"
> -CONFIG_ARMV7_LPAE=y
> -CONFIG_SYS_LOAD_ADDR=0x1000000
> -CONFIG_TARGET_BCM96753REF=y
> -CONFIG_ENV_VARS_UBOOT_CONFIG=y
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
> -CONFIG_FIT=y
> -CONFIG_FIT_SIGNATURE=y
> -CONFIG_FIT_CIPHER=y
> -CONFIG_FIT_VERBOSE=y
> -CONFIG_LEGACY_IMAGE_FORMAT=y
> -CONFIG_SUPPORT_RAW_INITRD=y
> -CONFIG_OF_STDOUT_VIA_ALIAS=y
> -# CONFIG_AUTOBOOT is not set
> -CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> -CONFIG_HUSH_PARSER=y
> -CONFIG_SYS_MAXARGS=24
> -CONFIG_SYS_CBSIZE=256
> -CONFIG_SYS_PBSIZE=276
> -# CONFIG_CMD_BOOTD is not set
> -# CONFIG_BOOTM_NETBSD is not set
> -# CONFIG_BOOTM_PLAN9 is not set
> -# CONFIG_BOOTM_RTEMS is not set
> -# CONFIG_BOOTM_VXWORKS is not set
> -# CONFIG_CMD_ELF is not set
> -# CONFIG_CMD_XIMG is not set
> -# CONFIG_CMD_EXPORTENV is not set
> -# CONFIG_CMD_IMPORTENV is not set
> -# CONFIG_CMD_EDITENV is not set
> -# CONFIG_CMD_SAVEENV is not set
> -# CONFIG_CMD_ENV_EXISTS is not set
> -# CONFIG_CMD_CRC32 is not set
> -CONFIG_CMD_MEMINFO=y
> -CONFIG_CMD_CLK=y
> -CONFIG_CMD_GPIO=y
> -# CONFIG_CMD_LOADS is not set
> -CONFIG_CMD_MTD=y
> -CONFIG_CMD_NAND=y
> -CONFIG_CMD_SPI=y
> -CONFIG_CMD_WDT=y
> -# CONFIG_CMD_SETEXPR is not set
> -CONFIG_CMD_CACHE=y
> -CONFIG_CMD_MTDPARTS=y
> -CONFIG_CMD_UBI=y
> -# CONFIG_CMD_UBIFS is not set
> -# CONFIG_NET is not set
> -CONFIG_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_BUTTON=y
> -CONFIG_BUTTON_GPIO=y
> -CONFIG_CLK=y
> -CONFIG_BCM6345_GPIO=y
> -# CONFIG_INPUT is not set
> -CONFIG_LED=y
> -CONFIG_LED_BCM6753=y
> -CONFIG_LED_BLINK=y
> -CONFIG_LED_GPIO=y
> -CONFIG_MISC=y
> -# CONFIG_MMC is not set
> -CONFIG_MTD=y
> -CONFIG_DM_MTD=y
> -CONFIG_MTD_RAW_NAND=y
> -CONFIG_NAND_BRCMNAND=y
> -CONFIG_NAND_BRCMNAND_6753=y
> -CONFIG_PINCTRL=y
> -CONFIG_PINCONF=y
> -CONFIG_SPECIFY_CONSOLE_INDEX=y
> -CONFIG_DM_SERIAL=y
> -CONFIG_PL01X_SERIAL=y
> -CONFIG_SPI=y
> -CONFIG_DM_SPI=y
> -CONFIG_SPI_MEM=y
> -CONFIG_SYSRESET=y
> -CONFIG_SYSRESET_WATCHDOG=y
> -CONFIG_WDT_BCM6345=y
> -CONFIG_REGEX=y
> diff --git a/include/configs/bcm96855.h b/include/configs/bcm96855.h
> index 6e420f2c66fb..ba2d8a317d25 100644
> --- a/include/configs/bcm96855.h
> +++ b/include/configs/bcm96855.h
> @@ -8,4 +8,8 @@
>
> #define CONFIG_SYS_SDRAM_BASE 0x00000000
>
> +#ifdef CONFIG_MTD_RAW_NAND
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
> +#endif /* CONFIG_MTD_RAW_NAND */
> +
> #endif
> diff --git a/include/configs/broadcom_bcm96753ref.h b/include/configs/broadcom_bcm96753ref.h
> deleted file mode 100644
> index 33c70c73c1fc..000000000000
> --- a/include/configs/broadcom_bcm96753ref.h
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * Copyright (C) 2022 Philippe Reynes <philippe.reynes@softathome.com>
> - */
> -
> -#include <linux/sizes.h>
> -
> -/*
> - * common
> - */
> -
> -/* UART */
> -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \
> - 230400, 500000, 1500000 }
> -/* Memory usage */
> -
> -/*
> - * 6853
> - */
> -
> -/* RAM */
> -#define CONFIG_SYS_SDRAM_BASE 0x00000000
> -
> -/* U-Boot */
> -
> -#ifdef CONFIG_MTD_RAW_NAND
> -#define CONFIG_SYS_MAX_NAND_DEVICE 1
> -#endif /* CONFIG_MTD_RAW_NAND */
> -
> -/*
> - * 96753ref
> - */
next prev parent reply other threads:[~2022-08-24 12:42 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-22 18:49 [PATCH v2 0/3] arm: bcmbca: move bcm6753 support under CONFIG_ARCH_BCMBCA William Zhang
2022-08-22 18:49 ` [PATCH v2 1/3] arm: bcmbca: add bcm6855 SoC " William Zhang
2022-08-24 12:41 ` Philippe REYNES
2022-10-31 14:45 ` Tom Rini
2022-08-22 18:49 ` [PATCH v2 2/3] arm: bcmbca: remove bcm6753 support under CONFIG_ARCH_BCM6753 William Zhang
2022-08-24 12:42 ` Philippe REYNES [this message]
2022-08-22 18:49 ` [PATCH v2 3/3] arm: bcmbca: replace ARCH_BCM6753 symbols in Kconfig with BCM6855 William Zhang
2022-08-24 12:42 ` Philippe REYNES
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=152d8bc1-4ba7-0d7b-bc0e-e71bb5e988a1@softathome.com \
--to=philippe.reynes@softathome.com \
--cc=anand.gore@broadcom.com \
--cc=andre.przywara@arm.com \
--cc=christianshewitt@gmail.com \
--cc=dan.beygelman@broadcom.com \
--cc=f.fainelli@gmail.com \
--cc=festevam@denx.de \
--cc=joel.peshkin@broadcom.com \
--cc=kursad.oney@broadcom.com \
--cc=paul.liu@linaro.org \
--cc=rafal@milecki.pl \
--cc=rayagonda.kokatanur@broadcom.com \
--cc=rick@andestech.com \
--cc=samuel@sholland.org \
--cc=seanga2@gmail.com \
--cc=sjg@chromium.org \
--cc=tomer.yacoby@broadcom.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=william.zhang@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.