* Re: IDE hotswap still broken in 2.4.17pre2...
@ 2001-12-07 15:57 Thomas Hood
0 siblings, 0 replies; 2+ messages in thread
From: Thomas Hood @ 2001-12-07 15:57 UTC (permalink / raw)
To: linux-kernel
This has never worked for me when I have tried it.
Attempts to "hdparm -R" and "hdparm -U" repeatedly
always eventually crash the kernel ... sometimes after
three or four iterations.
^ permalink raw reply [flat|nested] 2+ messages in thread
* kernel oops on "hdparm -R"
@ 2001-11-05 19:09 PALLAI Roland
2001-12-07 15:43 ` IDE hotswap still broken in 2.4.17pre2 Pallai Roland
0 siblings, 1 reply; 2+ messages in thread
From: PALLAI Roland @ 2001-11-05 19:09 UTC (permalink / raw)
To: linux-kernel
When I try to add a new IDE disk to the channel 1 with the command
"hdparm -R 0x170 0 0 /dev/hda", I've got a kernel oops (and freeze)..
It's works fine _once_, if there wasn't any detected disk on channel
before.
my config:
kernel 2.4.9 - 2.4.14pre7 (I've tried many of them)
PIIX and VIA motherboards (shows same error)
--
DaP
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-12-07 15:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-12-07 15:57 IDE hotswap still broken in 2.4.17pre2 Thomas Hood
-- strict thread matches above, loose matches on Subject: below --
2001-11-05 19:09 kernel oops on "hdparm -R" PALLAI Roland
2001-12-07 15:43 ` IDE hotswap still broken in 2.4.17pre2 Pallai Roland
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.