From: Mirek23 <miroslaw.dach@psi.ch>
To: linuxppc-embedded@ozlabs.org
Subject: Re: zImage.elf loads but does not start
Date: Mon, 23 Apr 2007 08:12:00 -0700 (PDT) [thread overview]
Message-ID: <10142161.post@talk.nabble.com> (raw)
In-Reply-To: <10079346.post@talk.nabble.com>
I have revised the xparameters_ml403.h and the setup of the FPGA part. I have
found that the interrupt for the RS232 was not configured. Right now I was
able to come to the point when the kernel was uncompressed but it did not
start:
loaded at: 00400000 004F9138
board data at: 004F7120 004F7138
relocated to: 00404064 0040407C
zimage at: 00404DF1 004F6BBB
avail ram: 004FA000 04000000
Linux/PPC load: console=ttl0,9600 ip=129.129.129.29 root=/dev/ram rw
Uncompressing Linux...done.
Now booting the kernel
Does anybody has an idea what could be wrong?
Best Regards
Mirek
--
View this message in context: http://www.nabble.com/zImage.elf-loads-but-not-starts-tf3607582.html#a10142161
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
next prev parent reply other threads:[~2007-04-23 15:12 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-19 15:10 zImage.elf loads but not starts Mirek23
2007-04-23 15:12 ` Mirek23 [this message]
2007-04-23 16:11 ` zImage.elf loads but does not start Leonid
2007-04-24 16:55 ` Mirek23
2007-04-24 17:11 ` Andrei Konovalov
2007-05-04 15:04 ` Mirek23
2007-05-04 15:41 ` Andrei Konovalov
2007-05-08 9:46 ` Mirek23
2007-05-08 21:46 ` Leonid
2007-05-08 21:50 ` Adrian Craine
2007-05-09 15:02 ` Charles Krinke
2007-05-10 8:45 ` Mirek23
2007-05-10 16:05 ` Mead, Joseph
2007-05-11 11:21 ` Mirek23
2007-05-15 12:08 ` Mirek23
2007-05-15 12:29 ` Andrei Konovalov
2007-05-15 12:45 ` Miroslaw Dach
2007-05-15 18:07 ` Andrei Konovalov
2007-05-15 18:49 ` Miroslaw Dach
2007-05-18 12:43 ` Mirek23
2007-05-25 12:24 ` Mirek23
2007-05-25 13:16 ` Andrei Konovalov
2007-05-25 15:23 ` Mirek23
2007-05-25 16:56 ` Advice needed Charles Krinke
2007-05-15 13:12 ` zImage.elf loads but does not start Mead, Joseph
2007-05-18 13:28 ` Mirek23
2007-04-23 16:24 ` Andrei Konovalov
2007-04-23 17:35 ` Grant Likely
2007-04-24 13:42 ` Mirek23
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10142161.post@talk.nabble.com \
--to=miroslaw.dach@psi.ch \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.