* Re: [parisc-linux] [PATCH] Serial MUX support for Nova and K-Class systems.
2002-09-07 22:03 ` Ryan Bradetich
@ 2002-09-08 8:49 ` Christoph Plattner
0 siblings, 0 replies; 4+ messages in thread
From: Christoph Plattner @ 2002-09-08 8:49 UTC (permalink / raw)
To: Ryan Bradetich; +Cc: parisc-linux
Hello Ryan,
what I am looking for is the field definitions of the
structures of the bus queries. I also have forgotten
the names here (I must go back to my "debug code"
and reread it !!!).
Oh, I have found it:
struct io_moudule
and
struct bc_module
(especially for the second one, I have no idea, where
it comes from). All these structure (there are more)
are defined in `include/asm/hardware.h'.
I have to get back to my hacks, to know more details
again.
Christoph
Ryan Bradetich wrote:
>
> Hi Christoph,
>
> I'm working on solving the problem why we do not find
> the MUX device. The ESIEE team has generously given
> me access to an E35 so I could poke around the HP-UX
> iotree and see what I could find.
>
> This is the summary of what I have found:
>
> name_buffer instance hw_addr parent sibling child
> "bc" 1 56 0x43b3a0 0xc15240 0xc15040
> "scsi1" 0 52 0xc15000 0xe74140 0xc15080
> "" -1 53 0xc15000 0xc15200 0
> "mux2" 0 56 0xc15000 0 0
> "bus_adapter" 0 60 0x43b3a0 0xe74240 0xc15280
> "lan2" 0 6 0xc15240 0 0
> "processor" 0 62 0x43b3a0 0xe74280 0
> "memory" 0 63 0x43b3a0 0 0
>
> The MUX sits at: 56/56 with HPA: 0xfffb8000
>
> >From your boot logs posted to the mailing list:
>
> ---- walk_native_bus: testing hpa=0xfffb8000, i=56
> ---- walk_native_bus: -- device not processed, mod = i !
> ------ alloc_pa_dev: entry
> -------------------------- find_parisc_device: entry, mod=56
> -------------------------- find_parisc_device: bc[0]=-1
> -------------------------- find_parisc_device: bc[1]=-1
> -------------------------- find_parisc_device: bc[2]=-1
> -------------------------- find_parisc_device: bc[3]=-1
> -------------------------- find_parisc_device: bc[4]=-1
> -------------------------- find_parisc_device: bc[5]=-1
> -- walk_lower_bus: entry
> -- walk_lower_bus: dev: hpa=0xfffb8000, io_io_low=0xfff00000,
> io_io_high=0xfff80000
>
> You also found a device at 0xfffb8000 which I am assuming is the MUX.
> (I need to get back on the E35 at the ESIEE to verify my thoughts.)
>
> The problem we are running into here is that 0xfffb8000 is on the
> Central BUS, not under the 56/ bus as the console wants to be in
> the HP-UX iotree. It appears to me that the bc and the MUX exist
> at the same HPA and that is what is causing the confusion in the
> parisc-linux I/O tree.
>
> The other thing that is curious to me is the "" devices under the
> bc between the scsi1 and the mux2 device.
>
> I think I can get this problem solved once I get access to the
> ESIEE E35 and am able to boot some test kernels on the system to
> play with.
>
> As for the scsi driver. I have the bare-bones (ie. does not work)
> of both the skunk (8-bit) and the wizard (16-bit) drivers started from a
> while back. I think you found a reference to the SPIFI chip that we
> could use in the driver to further progress the drivers and hopefully
> get them talking.
>
> The document is the IOACD document I believe. What are you looking for?
> Parts of the document are on the parisc-linux website, but if that is
> not enough info, I'll try to find it for you in the IOACD.
>
> Thanks!
>
> - Ryan
>
> On Sat, 2002-09-07 at 15:36, Christoph Plattner wrote:
> > Hallo Ryan,
> >
> > after that long time, I did the first experiment with
> > your new MUX driver ...
> >
> > ... and it fails on my E55.
> >
> > But NO WONDER ! I already have the problem finding any
> > devices on the I/O interface card, and I had no time
> > since weeks now, to do further steps.
> >
> > In general I have the problem in basic stuff and in
> > docu, special for the I/O scanning via PDC in more
> > details. In the normal PDC/IO there is not enough docu
> > for that. I was informed, that there is one more docu
> > handling this, bt I forgot the name, something like
> > "AIO" or so.
> >
> > How we can go one step forward, as I also want to
> > start (in slowly steps) the SCSI driver ... ?
> >
> > Bye,
> > Christoph
> >
> >
> >
> > Ryan Bradetich wrote:
> > >
> > > Hello all,
> > >
> > > I just committed support for the Serial MUX driver as linux-2.4.19-pa5.
> > >
> > > This patch has been tested on my K460 and has been working well. The
> > > driver uses the same /dev/ttyB0 device the PDC Software console that
> > > Christoph Plattner wrote and is available under the Non-standard serial
> > > ports section.
> > >
> > > Currently the driver only supports the Eole CAP/MUX (A Direct) device
> > > since that is all I have to test with. Additional devices can be added
> > > under this driver as people with systems have a chance to test.
> > >
> > > I tried to document the driver with kerneldoc, but it would be nice if
> > > someone would check over my comment as I had to google/guess what most
> > > of the ioctls and tty flags were.
> > >
> > > The committed patch can be found at:
> > > ftp://ftp.parisc-linux.org/patches/serial_mux_v0.1.diff
> > >
> > > Feedback greatly appreciated!
> > >
> > > Thanks,
> > >
> > > - Ryan
> > >
> > > _______________________________________________
> > > parisc-linux mailing list
> > > parisc-linux@lists.parisc-linux.org
> > > http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
> >
> > --
> > -------------------------------------------------------
> > private: christoph.plattner@gmx.at
> > company: christoph.plattner@alcatel.at
> >
--
-------------------------------------------------------
private: christoph.plattner@gmx.at
company: christoph.plattner@alcatel.at
^ permalink raw reply [flat|nested] 4+ messages in thread