Edirol PCR-50 keyboard with ALSA USB MIDI

Edirol PCR-50 keyboard with ALSA USB MIDI

[Josh Green]

[-- Attachment #1: Type: text/plain, Size: 2062 bytes --]

I sent an email to alsa-user about this issue a few days ago, but now
I've delved into the problem a little more and believe it to be a bug
(rather than user error :)

I'm having some troubles getting my Edirol PCR-50 keyboard working via
USB with my laptop. I'm using latest CVS of ALSA (as of December 28
2002) and stock linux-2.4.20 on a Mandrake 9.0 system. The keyboard is
detected and the snd-usb-audio module hotplugs itself, but I'm not
getting any data via the raw MIDI port or sequencer ports. Here is the
output from /var/log/messages when plugging the device:

Dec 29 19:39:44 SillyPuddy kernel: hub.c: new USB device 00:07.2-1.3,
assigned address 4
Dec 29 19:39:44 SillyPuddy kernel: usb.c: USB device 4 (vend/prod
0x582/0x33) is not claimed by any active driver.
Dec 29 19:39:47 SillyPuddy /etc/hotplug/usb.agent: Setup snd-usb-audio
for USB product 582/33/100
Dec 29 19:39:47 SillyPuddy kernel: usb.c: registered new driver
snd-usb-audio
Dec 29 19:39:47 SillyPuddy kernel: snd-usb-midi: created 2 output and 3
input ports
Dec 29 19:39:47 SillyPuddy kernel: usb-uhci.c: uhci_submit_urb: pipesize
for pipe 40008480 is zero
Dec 29 19:39:47 SillyPuddy kernel: snd-usb-midi: usb_submit_urb: -90


The last 2 log lines I believe are significant. Looking at the code I
found that the usb_maxpacket macro is returning 0 for the input endpoint
for the PCR USB device which causes uhci_submit_urb to fail (-90 =
EMSGSIZE which probably isn't really the right code, EINVAL maybe). I
couldn't figure out if this size was set by ALSA or supplied by the
device info or something, and since its a bit over my head, I decided to
post this here. I hope someone has a better idea of whats going on.

Some more info:

/proc/asound/cards:

0 [PCR            ]: USB-Audio - EDIROL PCR
                     Roland EDIROL PCR


cat /proc/asound/PCR/midi0:

Roland EDIROL PCR

Output 0
  Tx bytes     : 0
Output 1
  Tx bytes     : 0
Input 0
  Rx bytes     : 0
Input 1
  Rx bytes     : 0
Input 2
  Rx bytes     : 0

I've also attached lsusb -v output. Cheers.
	Josh Green

[-- Attachment #2: lsusb.txt --]
[-- Type: text/plain, Size: 139 bytes --]

Bus 001 Device 001: ID 0000:0000  
Bus 001 Device 002: ID 05e3:0604 Genesys Logic, Inc. 
Bus 001 Device 006: ID 0582:0033 Roland Corp. 

Re: Edirol PCR-50 keyboard with ALSA USB MIDI

[Josh Green]

On Wed, 2003-01-01 at 21:16, Josh Green wrote:
> 
> I've also attached lsusb -v output. Cheers.

Ooops, looks like lsusb without -v instead.. Should look before I
attach. Let me know if that or any other information would be helpful.
Cheers.
	Josh Green

> Bus 001 Device 001: ID 0000:0000  
> Bus 001 Device 002: ID 05e3:0604 Genesys Logic, Inc. 
> Bus 001 Device 006: ID 0582:0033 Roland Corp. 




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf