[parisc-linux] Problems with Woody on 710.

[parisc-linux] Problems with Woody on 710.

[Buffalo Bill]

Hi,

after searching the mailing list I've found some messages which reported
success in installing Woody on a 710. So I tried to install it. After
trying many many different lifimages, all ended up in the same result:
It hung during installation ( while mounting the root file system ).
Switching to another console ( which still worked ) showed me that
/sbin/dbootstrap and [scsi_eh_0] were both in state D.  

What did I do wrong ? Or to put it other words: How did you guys get
your 710s up'n'running ?

Thanks.

Re: [parisc-linux] Problems with Woody on 710.

[Thibaut VARENE]

On 26 Jan 2003 16:44:40 +0100
"Buffalo Bill" <buffalo@gediegos.de> wrote:

> Hi,
> 
> after searching the mailing list I've found some messages which
> reported success in installing Woody on a 710. So I tried to install
> it. After trying many many different lifimages, all ended up in the
> same result: It hung during installation ( while mounting the root
> file system ). Switching to another console ( which still worked )
> showed me that/sbin/dbootstrap and [scsi_eh_0] were both in state D.
If you can switch to another console then the system _isn't_ hung.

I saw the same kind of problem on boxes with low amount of RAM (<32M).
Though the fact that [scsi_eh_0] is in D state isn't good at all. Maybe
you have a problem with your SCSI chain (hard disk, termination
problem...?)

> 
> What did I do wrong ? Or to put it other words: How did you guys get
> your 710s up'n'running ?
The 710 we have running here runs a preinstalled filesystem. That is to
say, the HD was prepared in another box and then plugged back into the
710.


Thibaut VARENE
The PA/Linux ESIEE Team
http://pateam.esiee.fr/

Re: [parisc-linux] Problems with Woody on 710.

[Buffalo Bill]

Am Son, 2003-01-26 um 17.03 schrieb Thibaut VARENE:

> If you can switch to another console then the system _isn't_ hung.
Well, okay the System isn't hung, but the installer.

> I saw the same kind of problem on boxes with low amount of RAM (<32M).
My machine has only 48 MBs

> Though the fact that [scsi_eh_0] is in D state isn't good at all. Maybe
> you have a problem with your SCSI chain (hard disk, termination
> problem...?)
It doesn't seem to be a HW problem, since the machine was running HP-UX
10.20 perfectly until i tried to install woody. :-(

> The 710 we have running here runs a preinstalled filesystem. That is to
> say, the HD was prepared in another box and then plugged back into the
> 710.

Hmm... i have only one single PA-RISC machine :-(
 
Thank you for answering.