* sniffing on a packet radio device
@ 2003-02-11 21:22 Folkert van Heusden
2003-02-11 21:36 ` Richard Adams
` (3 more replies)
0 siblings, 4 replies; 7+ messages in thread
From: Folkert van Heusden @ 2003-02-11 21:22 UTC (permalink / raw)
To: linux-hams
Hi,
I have a BayCom modem connected to com1. I've also loaded the module.
As a test I assigned an ip-address to it and pinged some random ip-
address. The transceiver (is that the word?) seems to transmit what
I'm sending. Also, sometimes I see the RX light of the modem blinking
so someone must be transmitting something. So I tried tcpdump on the
device (bcsh0) but that failed with a "unknown data link type 3".
So I was wondering: is there anything out there with which I can
sniff *everything* that is coming through?
Thank you.
Folkert van Heusden
www.vanheusden.com
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: sniffing on a packet radio device
2003-02-11 21:22 sniffing on a packet radio device Folkert van Heusden
@ 2003-02-11 21:36 ` Richard Adams
2003-02-11 21:38 ` Ben Stienstra
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Richard Adams @ 2003-02-11 21:36 UTC (permalink / raw)
To: Folkert van Heusden; +Cc: linux-hams
On Tue, 2003-02-11 at 22:22, Folkert van Heusden wrote:
> Hi,
>
> I have a BayCom modem connected to com1. I've also loaded the module.
> As a test I assigned an ip-address to it and pinged some random ip-
> address. The transceiver (is that the word?) seems to transmit what
> I'm sending. Also, sometimes I see the RX light of the modem blinking
> so someone must be transmitting something. So I tried tcpdump on the
> device (bcsh0) but that failed with a "unknown data link type 3".
> So I was wondering: is there anything out there with which I can
> sniff *everything* that is coming through?
>
>
> Thank you.
listen -p bcsh0 -a
--
Regards Richard
pa3gcu@zeelandnet.nl
http://people.zeelandnet.nl/pa3gcu
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: sniffing on a packet radio device
2003-02-11 21:22 sniffing on a packet radio device Folkert van Heusden
2003-02-11 21:36 ` Richard Adams
@ 2003-02-11 21:38 ` Ben Stienstra
2003-02-11 21:38 ` Luc Langehegermann
2003-02-11 21:39 ` Shane Deering
3 siblings, 0 replies; 7+ messages in thread
From: Ben Stienstra @ 2003-02-11 21:38 UTC (permalink / raw)
To: linux-hams
try /usr/bin/listen -r
regards,
PD2BS, Ben
On Tue, 2003-02-11 at 22:22, Folkert van Heusden wrote:
> Hi,
>
> I have a BayCom modem connected to com1. I've also loaded the module.
> As a test I assigned an ip-address to it and pinged some random ip-
> address. The transceiver (is that the word?) seems to transmit what
> I'm sending. Also, sometimes I see the RX light of the modem blinking
> so someone must be transmitting something. So I tried tcpdump on the
> device (bcsh0) but that failed with a "unknown data link type 3".
> So I was wondering: is there anything out there with which I can
> sniff *everything* that is coming through?
>
>
> Thank you.
>
> Folkert van Heusden
> www.vanheusden.com
> -
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: sniffing on a packet radio device
2003-02-11 21:22 sniffing on a packet radio device Folkert van Heusden
2003-02-11 21:36 ` Richard Adams
2003-02-11 21:38 ` Ben Stienstra
@ 2003-02-11 21:38 ` Luc Langehegermann
2003-02-11 21:39 ` Shane Deering
3 siblings, 0 replies; 7+ messages in thread
From: Luc Langehegermann @ 2003-02-11 21:38 UTC (permalink / raw)
To: Folkert van Heusden, linux-hams
On Tuesday 11 February 2003 22:22, Folkert van Heusden wrote:
> Hi,
>
> I have a BayCom modem connected to com1. I've also loaded the module.
> As a test I assigned an ip-address to it and pinged some random ip-
> address. The transceiver (is that the word?) seems to transmit what
> I'm sending. Also, sometimes I see the RX light of the modem blinking
> so someone must be transmitting something. So I tried tcpdump on the
> device (bcsh0) but that failed with a "unknown data link type 3".
> So I was wondering: is there anything out there with which I can
> sniff *everything* that is coming through?
>
Try 'listen -ac -p <port>'
Luc
>
> Thank you.
>
> Folkert van Heusden
> www.vanheusden.com
> -
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: sniffing on a packet radio device
2003-02-11 21:22 sniffing on a packet radio device Folkert van Heusden
` (2 preceding siblings ...)
2003-02-11 21:38 ` Luc Langehegermann
@ 2003-02-11 21:39 ` Shane Deering
2003-02-12 14:22 ` soundmodem, serial port, parallel port? Vivi Kusumo
3 siblings, 1 reply; 7+ messages in thread
From: Shane Deering @ 2003-02-11 21:39 UTC (permalink / raw)
To: linux-hams
On Wed, 12 Feb 2003 08:22, Folkert van Heusden wrote:
> Hi,
>
> I have a BayCom modem connected to com1. I've also loaded the module.
> As a test I assigned an ip-address to it and pinged some random ip-
> address. The transceiver (is that the word?) seems to transmit what
> I'm sending. Also, sometimes I see the RX light of the modem blinking
> so someone must be transmitting something. So I tried tcpdump on the
> device (bcsh0) but that failed with a "unknown data link type 3".
> So I was wondering: is there anything out there with which I can
> sniff *everything* that is coming through?
Try /usr/bin/listen.
I like to use "listen -car".
And get a license.
--
Shane Deering Sent using Kmail v1.4.3
vk3bvp@qsl.net on Mandrake Linux, the Desktop OS
vk3bvp@vk3bvp.#sev.vic.aus.oc MDK9.0 Up 1 hour and 5 minutes
http://www.qsl.net/vk3bvp/ RH7.2 Up 18 hours and 8 minutes
^ permalink raw reply [flat|nested] 7+ messages in thread* soundmodem, serial port, parallel port?
2003-02-11 21:39 ` Shane Deering
@ 2003-02-12 14:22 ` Vivi Kusumo
2003-02-13 21:01 ` sniffing on a packet radio device Folkert van Heusden
0 siblings, 1 reply; 7+ messages in thread
From: Vivi Kusumo @ 2003-02-12 14:22 UTC (permalink / raw)
To: linux-hams
Hi all,
I am trying now to communicate 2 machines using ax25
protocoll in a room.
The machines are using RH 7.1 kernel upgraded 2.4.19.
The sound cards are PCI type and use the
soundmodem-0.7.
Firstly, I have tried using stereo cable as follow:
|pc1|-|sc1|------(cross connection)-----|sc2|-|pc2|
ping, ftp and telnet are worked enough.
Secondly, I am trying wireless using HT (Kenwood
TH-25G) <www.baycom.org/bayweb/tech/handy.htm> and PTT
circuit from
<http://campus.murraystate.edu/staff/scott.thile/k4set/packet/ptt.htm>.
|pc1|-|sc1|-|ht1|<~~~~~~>|ht2|-|sc2|-|pc2|
44.128.1.5 44.128.1.8
[my1com]# route add 44.128.1.8 sm0
[my2com]# route add 44.128.1.5 sm0
[my1com]# arp -n 44.128.1.8 -H ax25 -s MY2COM -i sm0
[my2com]# arp -n 44.128.1.5 -H ax25 -s MY1COM -i sm0
[my2com]$ ping my1com
PING my1com.ampr.org (44.128.1.5) from 44.128.1.8:
56(84) bytes of data
From my2com.ampr.org (44.128.1.8): Destination Host
unreachable
..
..
From my2com.ampr.org (44.128.1.8): Destination Host
unreachable
--- my1com.ampr.org ping statistics ---
18 packets transmitted, 0 packet received, +17 errors,
100% packets loss
During ping
[my2com]# listen -a
axconfig: port 1 not active
axconfig: port 2 not active
sc: fm my2com to my1com ctl UI pid=CC(IP) len 84
IP: len 84 44.128.1.8->44.128.1.5 ihl 20 ttl 64 DF
prot ICMP
ICMP: type Echo Request id 42758 seq 0
0000 ..J>I>..................! "#$%&'()*+,-./01234567
sc: fm my2com to my1com ctl UI pid=CC(IP) len 84
IP: len 84 44.128.1.8->44.128.1.5 ihl 20 ttl 64 DF
prot ICMP
ICMP: type Echo Request id 42758 seq 256
0000 ..J>a1..................! "#$%&'()*+,-./01234567
sc: fm my2com to my1com ctl UI pid=CC(IP) len 84
IP: len 84 44.128.1.8->44.128.1.5 ihl 20 ttl 64 DF
prot ICMP
ICMP: type Echo Request id 42758 seq 512
0000 ..J>B1..................! "#$%&'()*+,-./01234567
..
..
[my1com]# listen -a
axconfig: port 1 not active
axconfig: port 2 not active
[my1com]#
How can I ping correctly pc1<-->pc2?
Should I activate the serial port 1?
Can I activate the parallel port if I use
soundmodem-0.7 or it is only for serial port? As we
might know for soundblaster (ISA) we can do
# sethdlc -p -i sm0 mode sbc:afsk1200 io 0x388 irq 10
dma 1 pario 0x378
Many thanks for any help!
Vivi
__________________________________________________
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2003-02-13 21:01 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-02-11 21:22 sniffing on a packet radio device Folkert van Heusden
2003-02-11 21:36 ` Richard Adams
2003-02-11 21:38 ` Ben Stienstra
2003-02-11 21:38 ` Luc Langehegermann
2003-02-11 21:39 ` Shane Deering
2003-02-12 14:22 ` soundmodem, serial port, parallel port? Vivi Kusumo
2003-02-13 21:01 ` sniffing on a packet radio device Folkert van Heusden
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.