All of lore.kernel.org
 help / color / mirror / Atom feed
* 2.5.65 7880 SCSI bug
@ 2003-03-28 15:56 Greg Copeland
  2003-03-28 17:08 ` Zwane Mwaikambo
  0 siblings, 1 reply; 2+ messages in thread
From: Greg Copeland @ 2003-03-28 15:56 UTC (permalink / raw)
  To: linux-kernel

I have an Asus P2L97-DS motherboard.  It has two PII-333 in it.  I'm
using the onboard SCSI interface, which is a 7880 (U).  I have 5-SCSI
drives (combination of wide and narrow), a SCSI CDROM and a SCSI tape
drive.  The drives have ID's 0-6 while the interface has ID 7.

When attempting to boot 2.5.65 or 2.5.64, neither is able to get past
SCSI initialization.  It simply loops and never completes a boot cycle. 
I have tried both the "newer" Adaptec AIC7xxx Fast -> U160 support (New
Driver) and the older Adaptec AIC7xxx support (old driver).  Both
experience the same behavior.

I'm currently running 2.4.19 and this system has been working, more or
less as is, since the mid 2.2-days.


Best Regards,

Greg Copeland





^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: 2.5.65 7880 SCSI bug
  2003-03-28 15:56 2.5.65 7880 SCSI bug Greg Copeland
@ 2003-03-28 17:08 ` Zwane Mwaikambo
  0 siblings, 0 replies; 2+ messages in thread
From: Zwane Mwaikambo @ 2003-03-28 17:08 UTC (permalink / raw)
  To: Greg Copeland; +Cc: Linux Kernel

On Fri, 28 Mar 2003, Greg Copeland wrote:

> I have an Asus P2L97-DS motherboard.  It has two PII-333 in it.  I'm
> using the onboard SCSI interface, which is a 7880 (U).  I have 5-SCSI
> drives (combination of wide and narrow), a SCSI CDROM and a SCSI tape
> drive.  The drives have ID's 0-6 while the interface has ID 7.
> 
> When attempting to boot 2.5.65 or 2.5.64, neither is able to get past
> SCSI initialization.  It simply loops and never completes a boot cycle. 
> I have tried both the "newer" Adaptec AIC7xxx Fast -> U160 support (New
> Driver) and the older Adaptec AIC7xxx support (old driver).  Both
> experience the same behavior.
> 
> I'm currently running 2.4.19 and this system has been working, more or
> less as is, since the mid 2.2-days.

Could you try booting with the following combinations of kernel 
parameters and report back.

1) "noapic"
2) "maxcpus=1"
3) "noirqbalance" with the appended patch.

Note that this didn't do anything for me either, my current workaround 
until i find out what's wrong is booting with noapic.

Index: linux-2.5.66/arch/i386/kernel/io_apic.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.66/arch/i386/kernel/io_apic.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 io_apic.c
--- linux-2.5.66/arch/i386/kernel/io_apic.c	24 Mar 2003 23:40:27 -0000	1.1.1.1
+++ linux-2.5.66/arch/i386/kernel/io_apic.c	28 Mar 2003 16:48:41 -0000
@@ -1143,7 +1143,7 @@ void __init setup_IO_APIC_irqs(void)
 		entry.delivery_mode = INT_DELIVERY_MODE;
 		entry.dest_mode = INT_DEST_MODE;
 		entry.mask = 0;				/* enable IRQ */
-		entry.dest.logical.logical_dest = TARGET_CPUS;
+		entry.dest.logical.logical_dest = 1; /* TARGET_CPUS; */
 
 		idx = find_irq_entry(apic,pin,mp_INT);
 		if (idx == -1) {
-- 
function.linuxpower.ca

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2003-03-28 17:01 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-03-28 15:56 2.5.65 7880 SCSI bug Greg Copeland
2003-03-28 17:08 ` Zwane Mwaikambo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.