* more or less pcmcia hdsp problems
@ 2003-05-12 4:56 jfm3
2003-05-12 12:54 ` Paul Davis
0 siblings, 1 reply; 2+ messages in thread
From: jfm3 @ 2003-05-12 4:56 UTC (permalink / raw)
To: ALSA Developer List
Planet CCRMA: kernel 2.4.20+stuff, alsa 0.9.2
OK. I get further after putting this into the first lines of
/etc/rc.sysinit:
modprobe pcmcia_core
modprobe yenta_socket
modprobe ds
modprobe snd-hammerfall-mem
dmesg output:
PCI: Enabling device 01:00.0 (0080 -> 0082)
Hammerfall memory allocator: buffers allocated for 1 cards
PCI: Setting latency timer of device 01:00.0 to 64
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:508: Hammerfall-DSP: no
Digiface or Multiface connected!
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:4092: card initialization
pending : waiting for firmware
edited lspci -vv output:
01:00.0 Multimedia audio controller: Xilinx, Inc. RME Hammerfall DSP
(rev 0b)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 17800000 (32-bit, non-prefetchable)
[size=64K]
hdsploader output:
hdsploader - firmware loader for RME Hammerfall DSP cards
Looking for HDSP + Multiface or Digiface cards :
Card 0 : RME Hammerfall DSP at 0x17800000, irq 9
Upload firmware for card hw:0
<<< good long pause >>>
Hwdep ioctl error on card hw:0 : Input/output error.
Yell at me if this belongs on alsa-user. I honestly can't tell.
Is this one of those "your firmware is too new" problems I've heard so
much about?
--
(jfm3 2838 BCBA 93BA 3058 ED95 A42C 37DB 66D1 B43C 9FD0)
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: more or less pcmcia hdsp problems
2003-05-12 4:56 more or less pcmcia hdsp problems jfm3
@ 2003-05-12 12:54 ` Paul Davis
0 siblings, 0 replies; 2+ messages in thread
From: Paul Davis @ 2003-05-12 12:54 UTC (permalink / raw)
To: jfm3; +Cc: ALSA Developer List
>Upload firmware for card hw:0
><<< good long pause >>>
>Hwdep ioctl error on card hw:0 : Input/output error.
>
>Yell at me if this belongs on alsa-user. I honestly can't tell.
>
>Is this one of those "your firmware is too new" problems I've heard so
>much about?
i don't think so. but alas, i don't have a different answer for you
right now. let me think about and get back to you. can you check dmesg
for messages when this happens?
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-05-12 12:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-05-12 4:56 more or less pcmcia hdsp problems jfm3
2003-05-12 12:54 ` Paul Davis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.