Re: problems with rme digi96/8

[Gorm David Lai <lai@daimi.au.dk>]

On Thu, 2003-06-05 at 21:03, Martin Langer wrote:
> On Thu, Jun 05, 2003 at 12:17:32PM +0200, Gorm David Lai wrote:
> > Hi, I really hope somebody can help me.
> > 
> > We have recently bought a RME Digi96/8 card. This connects via adat to a
> > mixing console.
> > I have implemented the code in the ALSA 0.9.0 HOWTO for playback. This
> > works fine on a sound blaster card in stereo.
> > However with the digi96/8 card the mixing console does not get any
> > input. The mixing console syncs fine on the adat connection, it just
> > does not seem to get any sound input.
> > 
> > Any help, would be greatly appreciated as I am getting desperate.
> > 
> 
> ADAT isn't well tested, so everything is possible. But a look to wiki page
> on http://opensrc.org/alsa/index.php?page=rme96 looks not so bad.
> 
> Are you using plughw:0,1 or hw:0,1? What's your alsa version? 
> 
> 
> martin
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
> thread debugger on the planet. Designed with thread debugging features
> you've never dreamed of, try TotalView 6 free at www.etnus.com.
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
> 
Well, I test and set only legal settings on the hardware. So every
setting I set returns success.

I normally use hw:0,1, but just tried with plughw:0,1. Sadly with no
luck.
My legal settings do not follow those on the page. The period size seems
to match, but my only legal buffer size is 4096. This seems to be
contrary to the info on the page. I also use a sample  size of 16.

I am not the one who installed alsa, but I think it is 0.9.1. The aplay
version is 0.9.3.

/Gorm



-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.