Re: problems with rme digi96/8

[Gorm David Lai <lai@daimi.au.dk>]

Thanks for the advice, though it still doesn't work. 
It seems to play, and sets the right sync on the mixing console. The
console just doesn't get any input.
Do I have to unmute the card anywhere?

/Gorm


On Wed, 2003-06-11 at 15:48, Anders Torger wrote:
> 
> Test this:
> 
> aplay -D hw:0,1 -r 44100 -f S16_LE -c 8 /dev/zero
> 
> it should work. It works on my card.
> 
> The problem in your 
> 
> aplay -D hw:0,1 -c 8 ~/cavi/sound/01/01\ Track\ \ 1.wav
> 
> is that aplay seems to ignore your -c 8, and reads the wav header 
> instead, and sets it to stereo, as you can see in the aplay output, 
> where it cleary says that it plays in "Stereo".
> 
> /Anders Torger
> 
> On Wednesday 11 June 2003 15.17, Gorm David Lai wrote:
> > I also have problems with aplay. Maybe this is related?
> >
> > The following command:
> >
> > aplay -D hw:0,1 -c 8 ~/cavi/sound/01/01\ Track\ \ 1.wav
> >
> > Which gives the following output:
> >
> > Playing WAVE '/users/lai/cavi/sound/01/01 Track  1.wav' : Signed 16
> > bit Little Endian, Rate 44100 Hz, Stereo
> > aplay: set_params:810: Channels count non available
> >
> >
> > /Gorm
> >
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by:  Etnus, makers of TotalView, The
> > best thread debugger on the planet. Designed with thread debugging
> > features you've never dreamed of, try TotalView 6 free at
> > www.etnus.com. _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/alsa-devel
> 




-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.