* hdsploader 1.1
@ 2003-07-09 19:02 Thomas Charbonnel
2003-07-10 4:00 ` Jesse Chappell
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Thomas Charbonnel @ 2003-07-09 19:02 UTC (permalink / raw)
To: alsa-devel
Hi,
You can find the new version of hdsploader here:
http://www.undata.org/~thomas/
This version includes a small fix + correct firmware files for rev11 cards.
I did not test those firmwares, but having skimmed through I can say they
look far more adequate than the previous ones. I'm waiting for feedback.
Many thanks to Martin Björnsen and Matthias Carstens from RME for their
quick answer.
I hope we're getting closer :)
Thomas
-------------------------------------------------------
This SF.Net email sponsored by: Parasoft
Error proof Web apps, automate testing & more.
Download & eval WebKing and get a free book.
www.parasoft.com/bulletproofapps
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: hdsploader 1.1 2003-07-09 19:02 hdsploader 1.1 Thomas Charbonnel @ 2003-07-10 4:00 ` Jesse Chappell 2003-07-11 0:21 ` David E. Storey 2003-07-11 0:42 ` jfm3 2003-07-14 14:52 ` Takashi Iwai 2 siblings, 1 reply; 7+ messages in thread From: Jesse Chappell @ 2003-07-10 4:00 UTC (permalink / raw) To: Thomas Charbonnel; +Cc: alsa-devel Thomas Charbonnel wrote on Wed, 09-Jul-2003: > You can find the new version of hdsploader here: > http://www.undata.org/~thomas/ > > This version includes a small fix + correct firmware files for rev11 cards. > I did not test those firmwares, but having skimmed through I can say they > look far more adequate than the previous ones. I'm waiting for feedback. > Many thanks to Martin Björnsen and Matthias Carstens from RME for their > quick answer. > > I hope we're getting closer :) Thomas and RME did it! The new firmware loads flawlessly and everything operates properly with my cardbus/multiface (rev 0xb)! Definitely commit the new version into the alsa-tools ASAP. Thanks again.... jlc ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: hdsploader 1.1 2003-07-10 4:00 ` Jesse Chappell @ 2003-07-11 0:21 ` David E. Storey 0 siblings, 0 replies; 7+ messages in thread From: David E. Storey @ 2003-07-11 0:21 UTC (permalink / raw) To: Jesse Chappell; +Cc: Thomas Charbonnel, alsa [-- Attachment #1: Type: text/plain, Size: 1445 bytes --] ditto. I have cardbus hdsp + multiface connected to CD player via S/PDIF coax and RME ADI 8 Pro via ADAT. All appears to work. Yay! no longer do I need to load firmware via windoze. d! On Thu, 2003-07-10 at 00:00, Jesse Chappell wrote: > Thomas Charbonnel wrote on Wed, 09-Jul-2003: > > > You can find the new version of hdsploader here: > > http://www.undata.org/~thomas/ > > > > This version includes a small fix + correct firmware files for rev11 cards. > > I did not test those firmwares, but having skimmed through I can say they > > look far more adequate than the previous ones. I'm waiting for feedback. > > Many thanks to Martin Björnsen and Matthias Carstens from RME for their > > quick answer. > > > > I hope we're getting closer :) > > Thomas and RME did it! The new firmware loads flawlessly and everything > operates properly with my cardbus/multiface (rev 0xb)! > > Definitely commit the new version into the alsa-tools ASAP. > > Thanks again.... > > jlc > > > > ------------------------------------------------------- > This SF.Net email sponsored by: Parasoft > Error proof Web apps, automate testing & more. > Download & eval WebKing and get a free book. > www.parasoft.com/bulletproofapps > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/alsa-devel > [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: hdsploader 1.1 2003-07-09 19:02 hdsploader 1.1 Thomas Charbonnel 2003-07-10 4:00 ` Jesse Chappell @ 2003-07-11 0:42 ` jfm3 2003-07-11 10:01 ` Thomas Charbonnel 2003-07-14 14:35 ` Takashi Iwai 2003-07-14 14:52 ` Takashi Iwai 2 siblings, 2 replies; 7+ messages in thread From: jfm3 @ 2003-07-11 0:42 UTC (permalink / raw) To: alsa-devel [-- Attachment #1: Type: text/plain, Size: 1194 bytes --] > You can find the new version of hdsploader here: > http://www.undata.org/~thomas/ This seems to break if you have other sound cards in /etc/modules.conf that are not loaded yet. Probably my modules.conf is not correct. It is attached. I start the system. The red light on the Multiface is on. No sound drivers are loaded yet. My modules.conf is as you see it. [jfm3@localhost jfm3]$ sudo hdsploader hdsploader - firmware loader for RME Hammerfall DSP cards Looking for HDSP + Multiface or Digiface cards : Card 0 : RME Hammerfall DSP at 0xe9020000, irq 12 Upload firmware for card hw:0 Firmware uploaded for card hw:0 Card 1 : The red light goes out. I can get sound if I mess around with gamix and amixer enough, although I still haven't figured out what all the numbers mean. Shouldn't that be card 3 as the hdsp? In modules.conf I have the hdsp at index 3. I don't understand exactly what the card "index" means. If I have snd-virmidi not commented out and follow the above procedure, I get a kernel oops when I run hdsploader but otherwise the same results. Thank you very much everyone for all your hard work. I only hope I get the chance to return the favor one day. (jfm3) [-- Attachment #2: modules.conf --] [-- Type: application/octet-stream, Size: 1594 bytes --] # PCI ethernet card, not the nforce one alias eth0 tulip alias usb-controller usb-ohci alias ieee1394-controller ohci1394 # PAY CLOSE ATTENTION to cards_limit alias char-major-116 snd options snd major=116 cards_limit=11 device_mode=0666 alias char-major-14 soundcore # PCI consumer audio card, not the nforce one alias snd-card-0 snd-trident alias snd-slot-0 snd-card-0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss options -k snd-trident index=0 # somehow we have to unload parport modules first # calling /sbin/modprobe from modules.conf ought to be illegal alias snd-card-1 snd-mtpav alias snd-slot-1 snd-card-1 options -k snd-mtpav index=1 irq=7 port=0x378 pre-install snd-mtpav /sbin/modprobe -r lp parport_pc parport # multiface hdsp alias snd-card-2 snd-hdsp alias snd-slot-2 snd-card-2 # gazillion (eight) snd-virmidi devices to OSSize the mtpav #alias snd-card-3 snd-virmidi #alias snd-slot-3 snd-card-3 #alias snd-card-4 snd-virmidi #alias snd-slot-4 snd-card-4 #alias snd-card-5 snd-virmidi #alias snd-slot-5 snd-card-5 #alias snd-card-6 snd-virmidi #alias snd-slot-6 snd-card-6 #alias snd-card-7 snd-virmidi #alias snd-slot-7 snd-card-7 #alias snd-card-8 snd-virmidi #alias snd-slot-8 snd-card-8 #alias snd-card-9 snd-virmidi #alias snd-slot-9 snd-card-9 #alias snd-card-10 snd-virmidi #alias snd-slot-10 snd-virmidi # who knows what this does? #options -k snd-virmidi index=3,4,5,6,7,8,9,10 enable=1,1,1,1,1,1,1,1 midi_devs=2,2,2,2,2,2,2,2 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: hdsploader 1.1 2003-07-11 0:42 ` jfm3 @ 2003-07-11 10:01 ` Thomas Charbonnel 2003-07-14 14:35 ` Takashi Iwai 1 sibling, 0 replies; 7+ messages in thread From: Thomas Charbonnel @ 2003-07-11 10:01 UTC (permalink / raw) To: jfm3; +Cc: alsa-devel > I start the system. The red light on the Multiface is on. No sound > drivers are loaded yet. My modules.conf is as you see it. > > [jfm3@localhost jfm3]$ sudo hdsploader > hdsploader - firmware loader for RME Hammerfall DSP cards > Looking for HDSP + Multiface or Digiface cards : > Card 0 : RME Hammerfall DSP at 0xe9020000, irq 12 > Upload firmware for card hw:0 > Firmware uploaded for card hw:0 > Card 1 : > Note thant you don't need to run hdsploader as root. If the hdsp appears as card 0, I suspect the modules get loaded at some point by some other mechanism. Did you tweak your init scripts ? > The red light goes out. I can get sound if I mess around with gamix and > amixer enough, although I still haven't figured out what all the numbers > mean. > > Shouldn't that be card 3 as the hdsp? In modules.conf I have the hdsp at > index 3. I don't understand exactly what the card "index" means. > > If I have snd-virmidi not commented out and follow the above procedure, > I get a kernel oops when I run hdsploader but otherwise the same > results. > I thought the maximum alsa snd_card_limit was 8, maybe I'm wrong ? That could explain the oops... Why do you use the -k flag with options ? Thomas ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps1 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: hdsploader 1.1 2003-07-11 0:42 ` jfm3 2003-07-11 10:01 ` Thomas Charbonnel @ 2003-07-14 14:35 ` Takashi Iwai 1 sibling, 0 replies; 7+ messages in thread From: Takashi Iwai @ 2003-07-14 14:35 UTC (permalink / raw) To: jfm3; +Cc: alsa-devel At Thu, 10 Jul 2003 17:42:21 -0700 (PDT), <jfm3@ouroboros-complex.org> wrote: > > If I have snd-virmidi not commented out and follow the above procedure, I > get a kernel oops when I run hdsploader but otherwise the same results. please send us the output of ksymoops. it would help debugging much better. thanks, Takashi ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps1 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: hdsploader 1.1 2003-07-09 19:02 hdsploader 1.1 Thomas Charbonnel 2003-07-10 4:00 ` Jesse Chappell 2003-07-11 0:42 ` jfm3 @ 2003-07-14 14:52 ` Takashi Iwai 2 siblings, 0 replies; 7+ messages in thread From: Takashi Iwai @ 2003-07-14 14:52 UTC (permalink / raw) To: Thomas Charbonnel; +Cc: alsa-devel Hi, sorry for the late response. i'm back from LinuxTag now. At Wed, 9 Jul 2003 21:02:58 +0200 (CEST), Thomas Charbonnel wrote: > > Hi, > > You can find the new version of hdsploader here: > http://www.undata.org/~thomas/ thanks, it's committed to cvs. unfortuantely missed in 0.9.5, though... Takashi ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps1 ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2003-07-14 14:52 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2003-07-09 19:02 hdsploader 1.1 Thomas Charbonnel 2003-07-10 4:00 ` Jesse Chappell 2003-07-11 0:21 ` David E. Storey 2003-07-11 0:42 ` jfm3 2003-07-11 10:01 ` Thomas Charbonnel 2003-07-14 14:35 ` Takashi Iwai 2003-07-14 14:52 ` Takashi Iwai
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.