From: NeilBrown <neilb@suse.de>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org,
Justin Piszcz <jpiszcz@lucidpixels.com>
Subject: [PATCH 001 of 10] md: md Kconfig speeling feex
Date: Thu, 1 Jun 2006 15:13:17 +1000 [thread overview]
Message-ID: <1060601051317.27547@suse.de> (raw)
In-Reply-To: 20060601150955.27444.patches@notabene
From: Justin Piszcz <jpiszcz@lucidpixels.com>
I was experimenting with Linux SW raid today and found a spelling error
when reading the help menus...
(and fly spell found more).
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./drivers/md/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff ./drivers/md/Kconfig~current~ ./drivers/md/Kconfig
--- ./drivers/md/Kconfig~current~ 2006-06-01 15:03:29.000000000 +1000
+++ ./drivers/md/Kconfig 2006-06-01 15:04:25.000000000 +1000
@@ -90,7 +90,7 @@ config MD_RAID10
depends on BLK_DEV_MD && EXPERIMENTAL
---help---
RAID-10 provides a combination of striping (RAID-0) and
- mirroring (RAID-1) with easier configuration and more flexable
+ mirroring (RAID-1) with easier configuration and more flexible
layout.
Unlike RAID-0, but like RAID-1, RAID-10 requires all devices to
be the same size (or at least, only as much as the smallest device
@@ -147,7 +147,7 @@ config MD_RAID5_RESHAPE
is online. However it is still EXPERIMENTAL code. It should
work, but please be sure that you have backups.
- You will need mdadm verion 2.4.1 or later to use this
+ You will need mdadm version 2.4.1 or later to use this
feature safely. During the early stage of reshape there is
a critical section where live data is being over-written. A
crash during this time needs extra care for recovery. The
@@ -221,7 +221,7 @@ config DM_SNAPSHOT
tristate "Snapshot target (EXPERIMENTAL)"
depends on BLK_DEV_DM && EXPERIMENTAL
---help---
- Allow volume managers to take writeable snapshots of a device.
+ Allow volume managers to take writable snapshots of a device.
config DM_MIRROR
tristate "Mirror target (EXPERIMENTAL)"
WARNING: multiple messages have this Message-ID (diff)
From: NeilBrown <neilb@suse.de>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Justin Piszcz <jpiszcz@lucidpixels.com>
Subject: [PATCH 001 of 10] md: md Kconfig speeling feex
Date: Thu, 1 Jun 2006 15:13:17 +1000 [thread overview]
Message-ID: <1060601051317.27547@suse.de> (raw)
In-Reply-To: 20060601150955.27444.patches@notabene
From: Justin Piszcz <jpiszcz@lucidpixels.com>
I was experimenting with Linux SW raid today and found a spelling error
when reading the help menus...
(and fly spell found more).
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./drivers/md/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff ./drivers/md/Kconfig~current~ ./drivers/md/Kconfig
--- ./drivers/md/Kconfig~current~ 2006-06-01 15:03:29.000000000 +1000
+++ ./drivers/md/Kconfig 2006-06-01 15:04:25.000000000 +1000
@@ -90,7 +90,7 @@ config MD_RAID10
depends on BLK_DEV_MD && EXPERIMENTAL
---help---
RAID-10 provides a combination of striping (RAID-0) and
- mirroring (RAID-1) with easier configuration and more flexable
+ mirroring (RAID-1) with easier configuration and more flexible
layout.
Unlike RAID-0, but like RAID-1, RAID-10 requires all devices to
be the same size (or at least, only as much as the smallest device
@@ -147,7 +147,7 @@ config MD_RAID5_RESHAPE
is online. However it is still EXPERIMENTAL code. It should
work, but please be sure that you have backups.
- You will need mdadm verion 2.4.1 or later to use this
+ You will need mdadm version 2.4.1 or later to use this
feature safely. During the early stage of reshape there is
a critical section where live data is being over-written. A
crash during this time needs extra care for recovery. The
@@ -221,7 +221,7 @@ config DM_SNAPSHOT
tristate "Snapshot target (EXPERIMENTAL)"
depends on BLK_DEV_DM && EXPERIMENTAL
---help---
- Allow volume managers to take writeable snapshots of a device.
+ Allow volume managers to take writable snapshots of a device.
config DM_MIRROR
tristate "Mirror target (EXPERIMENTAL)"
next prev parent reply other threads:[~2006-06-01 5:13 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-01 5:13 [PATCH 000 of 10] md: Introduction - assorted patches for -mm NeilBrown
2006-06-01 5:13 ` NeilBrown [this message]
2006-06-01 5:13 ` [PATCH 001 of 10] md: md Kconfig speeling feex NeilBrown
2006-06-01 5:13 ` [PATCH 002 of 10] md: Fix Kconfig error NeilBrown
2006-06-01 5:13 ` [PATCH 003 of 10] md: Fix bug that stops raid5 resync from happening NeilBrown
2006-06-01 5:13 ` [PATCH 004 of 10] md: Allow re-add to work on array without bitmaps NeilBrown
2006-06-01 5:13 ` [PATCH 005 of 10] md: Don't write dirty/clean update to spares - leave them alone NeilBrown
2006-06-01 5:13 ` [PATCH 006 of 10] md: Set/get state of array via sysfs NeilBrown
2006-06-01 5:33 ` Chris Wright
2006-06-01 5:43 ` Neil Brown
2006-06-01 5:14 ` [PATCH 007 of 10] md: Allow rdev state to be set " NeilBrown
2006-06-01 5:14 ` [PATCH 008 of 10] md: Allow raid 'layout' to be read and " NeilBrown
2006-06-01 5:34 ` Chris Wright
2006-06-01 5:44 ` Neil Brown
2006-06-01 5:14 ` [PATCH 009 of 10] md: Allow resync_start to be set and queried " NeilBrown
2006-06-01 5:14 ` [PATCH 010 of 10] md: Allow the write_mostly flag to be set " NeilBrown
2006-08-05 5:59 ` Mike Snitzer
2006-08-05 23:43 ` Mike Snitzer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1060601051317.27547@suse.de \
--to=neilb@suse.de \
--cc=akpm@osdl.org \
--cc=jpiszcz@lucidpixels.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.