kernel 2.6.0test10 and sensors 2.8.1 CVS wrong temperature values

kernel 2.6.0test10 and sensors 2.8.1 CVS wrong temperature values

[robs]

Hi,
I have 2.6.0test10 running with /sys mounted
My motherboard is an Asus A7n8x-8 rev2 (nforce2 chipset)

When I run sensors I get:
eeprom-i2c-0-51
Adapter: SMBus nForce2 adapter at 5000
Algorithm: Unavailable from sysfs
ERROR: data 1

as99127f-i2c-1-2d
Adapter: SMBus nForce2 adapter at 5500
Algorithm: Unavailable from sysfs
VCore 1:   +1.71 V  (min =  +1.49 V, max =  +1.81 V)
VCore 2:   +1.71 V  (min =  +1.49 V, max =  +1.81 V)
+3.3V:     +3.41 V  (min =  +2.98 V, max =  +3.63 V)
+5V:       +4.95 V  (min =  +4.52 V, max =  +5.48 V)
+12V:     +11.61 V  (min = +10.82 V, max = +13.13 V)
-12V:     -12.14 V  (min =  -0.00 V, max =  -0.00 V)
-5V:       -4.60 V  (min =  -0.00 V, max =  -0.00 V)
fan1:     4411 RPM  (min = 3000 RPM, div = 2)
fan2:        0 RPM  (min = 3000 RPM, div = 2)
fan3:        0 RPM  (min = 3000 RPM, div = 2)
M/B Temp:     +4?C  (high =   +13?C, hyst =    +6?C)
CPU Temp:   +3.3?C  (high =   +12?C, hyst =   +10?C)
temp3:     +25.5?C  (high =   +12?C, hyst =   +10?C)
vid:      +1.650 V
alarms:   
beep_enable:
          Sound alarm enabled

The values are incorrect, CPU temp can't be 3.3?C (I don't usually havemy
computer in a fridge). The correct value would be between 40? and 50?for the CPU
and 20? and 30? for the M/B
Both the bios and the asus utility on Windows show the correct values



Regards,
Roberto Sebastiano

-------------------------------------------------------------
Servizio Webmail di Multiplayer.it http://www.multiplayer.it

kernel 2.6.0test10 and sensors 2.8.1 CVS wrong temperature values

[Mark Studebaker]

the temps are 10x too low.
fixed in CVS late yesterday.

robs@multiplayer.it wrote:

> Hi,
> I have 2.6.0test10 running with /sys mounted
> My motherboard is an Asus A7n8x-8 rev2 (nforce2 chipset)
> 
> When I run sensors I get:
> eeprom-i2c-0-51
> Adapter: SMBus nForce2 adapter at 5000
> Algorithm: Unavailable from sysfs
> ERROR: data 1
> 
> as99127f-i2c-1-2d
> Adapter: SMBus nForce2 adapter at 5500
> Algorithm: Unavailable from sysfs
> VCore 1:   +1.71 V  (min =  +1.49 V, max =  +1.81 V)
> VCore 2:   +1.71 V  (min =  +1.49 V, max =  +1.81 V)
> +3.3V:     +3.41 V  (min =  +2.98 V, max =  +3.63 V)
> +5V:       +4.95 V  (min =  +4.52 V, max =  +5.48 V)
> +12V:     +11.61 V  (min = +10.82 V, max = +13.13 V)
> -12V:     -12.14 V  (min =  -0.00 V, max =  -0.00 V)
> -5V:       -4.60 V  (min =  -0.00 V, max =  -0.00 V)
> fan1:     4411 RPM  (min = 3000 RPM, div = 2)
> fan2:        0 RPM  (min = 3000 RPM, div = 2)
> fan3:        0 RPM  (min = 3000 RPM, div = 2)
> M/B Temp:     +4?C  (high =   +13?C, hyst =    +6?C)
> CPU Temp:   +3.3?C  (high =   +12?C, hyst =   +10?C)
> temp3:     +25.5?C  (high =   +12?C, hyst =   +10?C)
> vid:      +1.650 V
> alarms:   
> beep_enable:
>           Sound alarm enabled
> 
> The values are incorrect, CPU temp can't be 3.3?C (I don't usually havemy
> computer in a fridge). The correct value would be between 40? and 50?for the CPU
> and 20? and 30? for the M/B
> Both the bios and the asus utility on Windows show the correct values
> 
> 
> 
> Regards,
> Roberto Sebastiano
> 
> -------------------------------------------------------------
> Servizio Webmail di Multiplayer.it http://www.multiplayer.it
> 

kernel 2.6.0test10 and sensors 2.8.1 CVS wrong temperature

[Roberto Sebastiano]

Il mer, 2003-11-26 alle 17:13, Mark Studebaker ha scritto:
> the temps are 10x too low.
> fixed in CVS late yesterday.

newdeal:/usr/src/sensors/lm_sensors2# sensors
eeprom-i2c-0-51
Adapter: SMBus nForce2 adapter at 5000
Algorithm: Unavailable from sysfs
ERROR: data 1

as99127f-i2c-1-2d
Adapter: SMBus nForce2 adapter at 5500
Algorithm: Unavailable from sysfs
VCore 1:   +1.71 V  (min =  +1.49 V, max =  +1.81 V)              
VCore 2:   +1.71 V  (min =  +1.49 V, max =  +1.81 V)              
+3.3V:     +3.41 V  (min =  +2.98 V, max =  +3.63 V)              
+5V:       +4.95 V  (min =  +4.52 V, max =  +5.48 V)              
+12V:     +11.61 V  (min = +10.82 V, max = +13.13 V)              
-12V:     -12.14 V  (min =  -0.00 V, max =  -0.00 V)              
-5V:       -4.60 V  (min =  -0.00 V, max =  -0.00 V)              
fan1:     4753 RPM  (min = 3000 RPM, div = 2)                     
fan2:        0 RPM  (min = 3000 RPM, div = 2)                     
fan3:        0 RPM  (min = 3000 RPM, div = 2)                     
M/B Temp:    +46?C  (high =  +127?C, hyst =   +60?C)          
CPU Temp:  +33.4?C  (high =  +120?C, hyst =  +100?C)          
temp3:    +255.4?C  (high =  +100?C, hyst =  +100?C)          
vid:      +1.650 V
alarms:   
beep_enable:
          Sound alarm enabled

Segmentation fault

M/B and CPU Temp are swapped
temp3 should be disabled
also, high and hyst value doesn't make sense I think

The backtrace:
Program received signal SIGSEGV, Segmentation fault.
0x400bba6b in free () from /lib/tls/libc.so.6
(gdb) bt
#0  0x400bba6b in free () from /lib/tls/libc.so.6
#1  0x4017f8c0 in __after_morecore_hook () from /lib/tls/libc.so.6
#2  0x080683c0 in ?? ()
#3  0x40047a98 in __JCR_LIST__ () from /usr/local/lib/libsensors.so.3
#4  0x40047c64 in completed.1 () from /usr/local/lib/libsensors.so.3
#5  0xbffff8c0 in ?? ()
#6  0x4002f67a in free_bus () from /usr/local/lib/libsensors.so.3
#7  0x4002f584 in sensors_cleanup () from /usr/local/lib/libsensors.so.3
#8  0x080492a8 in main ()



-- 
Roberto Sebastiano <robs@multiplayer.it>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Questa parte del messaggio =?ISO-8859-1?Q?è?= firmata
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20031126/e30452fa/attachment.bin