All of lore.kernel.org
 help / color / mirror / Atom feed
From: liste@jordet.nu (Stian Jordet)
To: linux-kernel@vger.kernel.org, sensors@stimpy.netroedge.com
Subject: i2c_adapter i2c-0: Bus collision!
Date: Thu, 19 May 2005 06:24:33 +0000	[thread overview]
Message-ID: <1073707567.621.5.camel@buick> (raw)
In-Reply-To: <20040108230559.05a5674c.khali@linux-fr.org>

tor, 08.01.2004 kl. 23.05 skrev Jean Delvare: 
> > i2c_adapter i2c-0: Bus collision! SMBus may be locked until next hard
> > reset. (sorry!)
> > 
> > Kernel 2.6.0 with lm-sensors 2.8.2.
> 
> Are you able to reproduce the same behavior with kernel 2.4.24 and
> lm-sensors 2.8.2?

Just tried, and I do. I forgot to mention it in my last mail, but I
sometime has to reload the modules before "sensors" finds any sensor.

> > I get very weird results, especially on the fan, but others as well.
> > Here are three runs of sensors:
> > (...)
> 
> Could you provide a few outputs of "i2cdump 0 0x2d"? I wonder if this
> will show read errors (as "XX") or simply changing values.

Attached three runs. Seems to be some read errors :( On these three runs I got
first three bus-collisions, then one, and last two.

> Does your BIOS provide a feature such as "Circle Of Protection" or
> anything that sounds like "active" hardware monitoring? Is it enabled?

No such option.

> If you have any other chips (eeproms for example) on the bus, do you
> observe similar behavior with these?

Not other chips.

> > It works fine with MBM in Windows. Well, MBM is having some troubles
> > with the temperature (it gets lower and lower as time pass, and ends
> > on about 8-9 degrees celsius. But fan and temperatures are read just
> > fine, never any glitch. On thing thing though, the Vcore2 is 1,70. The
> > Bios reports it correctly, but both MBM and LM-sensors says 1,50. Have
> > no idea why. The 1,50 is static, never changes, while VCore1 (which
> > ideally should be 1,75) varies from 1,75 to 1,79. In the BIOS both
> > seem sane, and varies with 3-4 degrees.
> > 
> > I guess all these problems are because of the bus collision, which I
> > have read usually happens because of bad boards. Which I admit that I
> > do have, but it works in Windows :(
> 
> Which motherboard is it?

A Rioworks SDVIA (http://www.rioworks.com/SDVIA.htm) Not very new, I'm afraid.
And not very good.

> Did you have to enable any particular option in MBM?

Nah, it just worked :)

> > What are the most common reasons for the bus collisions (...)?
> 
> Bad brakes?
> 
> Just kidding... ;)

Hehe :)

I guess this is unsolvable, but I just wanted to hear what you say. Kinda weird
it works so well with MBM, but that's ok. It's just for fun I want it to work.

Thanks for your reply :)

Best regards,
Stian
-------------- next part --------------
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
20: 71 XX d1 bb bb 79 6e 7f d9 d4 ff ff 00 ff 00 ed    qX???yn???.....?
30: b0 df ff fd be bf ff ff b9 XX ff 6f 77 ef XX 00    ??.???..?X.ow?X.
40: 01 00 10 00 00 00 00 56 XX 03 01 40 41 85 80 5c    ?.?....VX??@A??\
50: ff ff 00 ff ff ff 00 00 30 70 ff ff 19 0f ff ff    ........0p..??..
60: XX 5e d1 bb bb 77 6e 7f dd d7 ff ff XX ff 00 ed    X^???wn???..X..?
70: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
a0: 70 5e d1 bb bb 77 6c 7f dd d4 ff 00 00 ff 00 ed    p^???wl???.....?
b0: XX df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    X?.???..??.ow?..
c0: 01 00 10 00 00 00 00 56 2d 03 01 40 41 85 80 5c    ?.?....V-??@A??\
d0: ff ff 00 ff ff ff 00 XX 30 70 ff ff 19 0f ff ff    .......X0p..??..
e0: 71 5e d1 b9 bb 78 6e XX XX d8 ff ff 00 ff XX ed    q^???xnXX?....X?
f0: b0 df ff fd be bf ff ff b9 fd ff 6f 77 XX 00 00    ??.???..??.owX..

     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
20: 71 XX d1 bb bb 79 6e 7f dd d9 ff ff 00 ff 00 db    qX???yn???.....?
30: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..
40: 01 00 10 00 00 00 00 56 2c 03 01 40 41 85 XX 5c    ?.?....V,??@A?X\
50: ff ff 00 ff ff ff 00 00 30 70 ff ff 19 0f ff ff    ........0p..??..
60: 70 5e d1 bb bb 7b 6c 7f dd d9 ff ff 00 ff 00 ed    p^???{l???.....?
70: b0 df ff fd be XX ff ff b9 fd ff 6f 77 ef 00 00    ??.??X..??.ow?..
80: ff ff ff ff ff ff ff ff ff ff ff XX ff ff ff ff    ...........X....
90: ff ff ff ff ff ff ff ff ff ff ff ff XX ff ff ff    ............X...
a0: 72 5e d1 bb bb 7a 6e 7f d9 d8 ff ff 00 ff 00 ec    r^???zn???.....?
b0: b0 df ff fd be bf ff XX b9 fd ff 6f 77 ef 00 00    ??.???.X??.ow?..
c0: 01 00 10 00 00 00 00 56 2d XX 01 40 41 85 80 5c    ?.?....V-X?@A??\
d0: ff ff 00 ff ff ff 00 00 30 70 ff ff 19 0f ff ff    ........0p..??..
e0: 70 5e d1 bb bb 78 6c 7f d9 d5 ff ff 00 XX 00 ed    p^???xl???...X.?
f0: b0 df ff fd bd bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..

     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
00: ff ff ff ff ff ff XX XX XX ff ff ff ff ff ff ff    ......XXX.......
10: ff ff ff ff ff XX XX ff ff ff ff XX ff ff ff ff    .....XX....X....
20: 70 XX d1 ba bc 78 6e 7f de d8 ff ff 00 ff 00 ed    pX???xn???.....?
30: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..
40: 01 00 10 00 00 00 00 56 2d 03 01 40 41 85 80 5c    ?.?....V-??@A??\
50: ff ff 00 ff ff ff 00 00 30 70 ff ff 19 0f ff ff    ........0p..??..
60: 70 5e d1 bb bb 78 6d 7f de d7 ff ff 00 ff 00 ed    p^???xm???.....?
70: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..
80: ff ff ff ff ff ff XX XX ff ff ff ff ff ff ff ff    ......XX........
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
a0: 71 XX d1 bb bb 78 6d 7f XX d8 ff ff 00 ff 00 ed    qX???xm?X?.....?
b0: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..
c0: 01 00 10 00 00 00 00 56 2d 03 01 40 41 84 80 5c    ?.?....V-??@A??\
d0: ff ff 00 ff ff ff 00 00 30 70 ff ff 19 0f ff ff    ........0p..??..
e0: 73 5d d1 bb bb 7a XX 7f de d8 ff ff 00 ff 00 ed    s]???zX???.....?
f0: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..

WARNING: multiple messages have this Message-ID (diff)
From: Stian Jordet <liste@jordet.nu>
To: linux-kernel@vger.kernel.org, sensors@stimpy.netroedge.com
Subject: Re: i2c_adapter i2c-0: Bus collision!
Date: Sat, 10 Jan 2004 05:06:07 +0100	[thread overview]
Message-ID: <1073707567.621.5.camel@buick> (raw)
In-Reply-To: <20040108230559.05a5674c.khali@linux-fr.org>

[-- Attachment #1: Type: text/plain, Size: 2377 bytes --]

tor, 08.01.2004 kl. 23.05 skrev Jean Delvare: 
> > i2c_adapter i2c-0: Bus collision! SMBus may be locked until next hard
> > reset. (sorry!)
> > 
> > Kernel 2.6.0 with lm-sensors 2.8.2.
> 
> Are you able to reproduce the same behavior with kernel 2.4.24 and
> lm-sensors 2.8.2?

Just tried, and I do. I forgot to mention it in my last mail, but I
sometime has to reload the modules before "sensors" finds any sensor.

> > I get very weird results, especially on the fan, but others as well.
> > Here are three runs of sensors:
> > (...)
> 
> Could you provide a few outputs of "i2cdump 0 0x2d"? I wonder if this
> will show read errors (as "XX") or simply changing values.

Attached three runs. Seems to be some read errors :( On these three runs I got
first three bus-collisions, then one, and last two.

> Does your BIOS provide a feature such as "Circle Of Protection" or
> anything that sounds like "active" hardware monitoring? Is it enabled?

No such option.

> If you have any other chips (eeproms for example) on the bus, do you
> observe similar behavior with these?

Not other chips.

> > It works fine with MBM in Windows. Well, MBM is having some troubles
> > with the temperature (it gets lower and lower as time pass, and ends
> > on about 8-9 degrees celsius. But fan and temperatures are read just
> > fine, never any glitch. On thing thing though, the Vcore2 is 1,70. The
> > Bios reports it correctly, but both MBM and LM-sensors says 1,50. Have
> > no idea why. The 1,50 is static, never changes, while VCore1 (which
> > ideally should be 1,75) varies from 1,75 to 1,79. In the BIOS both
> > seem sane, and varies with 3-4 degrees.
> > 
> > I guess all these problems are because of the bus collision, which I
> > have read usually happens because of bad boards. Which I admit that I
> > do have, but it works in Windows :(
> 
> Which motherboard is it?

A Rioworks SDVIA (http://www.rioworks.com/SDVIA.htm) Not very new, I'm afraid.
And not very good.

> Did you have to enable any particular option in MBM?

Nah, it just worked :)

> > What are the most common reasons for the bus collisions (...)?
> 
> Bad brakes?
> 
> Just kidding... ;)

Hehe :)

I guess this is unsolvable, but I just wanted to hear what you say. Kinda weird
it works so well with MBM, but that's ok. It's just for fun I want it to work.

Thanks for your reply :)

Best regards,
Stian

[-- Attachment #2: i2cdump.txt --]
[-- Type: text/plain, Size: 3674 bytes --]

     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
20: 71 XX d1 bb bb 79 6e 7f d9 d4 ff ff 00 ff 00 ed    qX???yn???.....?
30: b0 df ff fd be bf ff ff b9 XX ff 6f 77 ef XX 00    ??.???..?X.ow?X.
40: 01 00 10 00 00 00 00 56 XX 03 01 40 41 85 80 5c    ?.?....VX??@A??\
50: ff ff 00 ff ff ff 00 00 30 70 ff ff 19 0f ff ff    ........0p..??..
60: XX 5e d1 bb bb 77 6e 7f dd d7 ff ff XX ff 00 ed    X^???wn???..X..?
70: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
a0: 70 5e d1 bb bb 77 6c 7f dd d4 ff 00 00 ff 00 ed    p^???wl???.....?
b0: XX df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    X?.???..??.ow?..
c0: 01 00 10 00 00 00 00 56 2d 03 01 40 41 85 80 5c    ?.?....V-??@A??\
d0: ff ff 00 ff ff ff 00 XX 30 70 ff ff 19 0f ff ff    .......X0p..??..
e0: 71 5e d1 b9 bb 78 6e XX XX d8 ff ff 00 ff XX ed    q^???xnXX?....X?
f0: b0 df ff fd be bf ff ff b9 fd ff 6f 77 XX 00 00    ??.???..??.owX..

     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
20: 71 XX d1 bb bb 79 6e 7f dd d9 ff ff 00 ff 00 db    qX???yn???.....?
30: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..
40: 01 00 10 00 00 00 00 56 2c 03 01 40 41 85 XX 5c    ?.?....V,??@A?X\
50: ff ff 00 ff ff ff 00 00 30 70 ff ff 19 0f ff ff    ........0p..??..
60: 70 5e d1 bb bb 7b 6c 7f dd d9 ff ff 00 ff 00 ed    p^???{l???.....?
70: b0 df ff fd be XX ff ff b9 fd ff 6f 77 ef 00 00    ??.??X..??.ow?..
80: ff ff ff ff ff ff ff ff ff ff ff XX ff ff ff ff    ...........X....
90: ff ff ff ff ff ff ff ff ff ff ff ff XX ff ff ff    ............X...
a0: 72 5e d1 bb bb 7a 6e 7f d9 d8 ff ff 00 ff 00 ec    r^???zn???.....?
b0: b0 df ff fd be bf ff XX b9 fd ff 6f 77 ef 00 00    ??.???.X??.ow?..
c0: 01 00 10 00 00 00 00 56 2d XX 01 40 41 85 80 5c    ?.?....V-X?@A??\
d0: ff ff 00 ff ff ff 00 00 30 70 ff ff 19 0f ff ff    ........0p..??..
e0: 70 5e d1 bb bb 78 6c 7f d9 d5 ff ff 00 XX 00 ed    p^???xl???...X.?
f0: b0 df ff fd bd bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..

     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
00: ff ff ff ff ff ff XX XX XX ff ff ff ff ff ff ff    ......XXX.......
10: ff ff ff ff ff XX XX ff ff ff ff XX ff ff ff ff    .....XX....X....
20: 70 XX d1 ba bc 78 6e 7f de d8 ff ff 00 ff 00 ed    pX???xn???.....?
30: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..
40: 01 00 10 00 00 00 00 56 2d 03 01 40 41 85 80 5c    ?.?....V-??@A??\
50: ff ff 00 ff ff ff 00 00 30 70 ff ff 19 0f ff ff    ........0p..??..
60: 70 5e d1 bb bb 78 6d 7f de d7 ff ff 00 ff 00 ed    p^???xm???.....?
70: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..
80: ff ff ff ff ff ff XX XX ff ff ff ff ff ff ff ff    ......XX........
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
a0: 71 XX d1 bb bb 78 6d 7f XX d8 ff ff 00 ff 00 ed    qX???xm?X?.....?
b0: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..
c0: 01 00 10 00 00 00 00 56 2d 03 01 40 41 84 80 5c    ?.?....V-??@A??\
d0: ff ff 00 ff ff ff 00 00 30 70 ff ff 19 0f ff ff    ........0p..??..
e0: 73 5d d1 bb bb 7a XX 7f de d8 ff ff 00 ff 00 ed    s]???zX???.....?
f0: b0 df ff fd be bf ff ff b9 fd ff 6f 77 ef 00 00    ??.???..??.ow?..

  reply	other threads:[~2005-05-19  6:24 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-01-08  2:00 i2c_adapter i2c-0: Bus collision! Stian Jordet
2005-05-19  6:24 ` Stian Jordet
2004-01-08 22:05 ` Jean Delvare
2005-05-19  6:24   ` Jean Delvare
2004-01-10  4:06   ` Stian Jordet [this message]
2005-05-19  6:24     ` Stian Jordet
2004-01-17  2:00     ` Stian Jordet
2005-05-19  6:24       ` Stian Jordet
2004-01-17  8:48       ` Jean Delvare
2005-05-19  6:24         ` Jean Delvare
2004-01-19 14:08         ` Stian Jordet
2005-05-19  6:24           ` Stian Jordet
2005-01-11 16:44         ` Stian Jordet
2005-05-19  6:25           ` Stian Jordet
2005-01-12 20:23           ` Jean Delvare
2005-05-19  6:25             ` Jean Delvare
2005-01-12 20:41             ` Stian Jordet
2005-05-19  6:25               ` Stian Jordet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1073707567.621.5.camel@buick \
    --to=liste@jordet.nu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sensors@stimpy.netroedge.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.