[Bluez-users] D-Link DBT-120

[Bluez-users] D-Link DBT-120

[Gene Imes]

I have this dongle and after upgrading kernel 2.6.4-rc1-mm1 when I
remove the dongle my laptop freezes.

This dongle has worked well before.

I can supply more information if necessary.

Thanks,

Gene


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] D-Link DBT-120

[Marcel Holtmann]

Hi Gene,

> I have this dongle and after upgrading kernel 2.6.4-rc1-mm1 when I
> remove the dongle my laptop freezes.
> 
> This dongle has worked well before.
> 
> I can supply more information if necessary.

the DBT-120 exists as Broadcom and as CSR version. What version do you
have (hciconfig -a)? Is BT_HCIUSB_SCO enabled in your kernel config? If
yes, disable it. What USB host controller driver do you use?

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] D-Link DBT-120

[Gene Imes]

Disregard my previous post. 2.6.4-rc1-mm2 has fixed this problem.

Thanks,


On Wed, 2004-03-03 at 08:05, Marcel Holtmann wrote:
> Hi Gene,
> 
> > I have this dongle and after upgrading kernel 2.6.4-rc1-mm1 when I
> > remove the dongle my laptop freezes.
> > 
> > This dongle has worked well before.
> > 
> > I can supply more information if necessary.
> 
> the DBT-120 exists as Broadcom and as CSR version. What version do you
> have (hciconfig -a)? Is BT_HCIUSB_SCO enabled in your kernel config? If
> yes, disable it. What USB host controller driver do you use?
> 
> Regards
> 
> Marcel
> 
> 
> 
> 
> -------------------------------------------------------
> SF.Net is sponsored by: Speed Start Your Linux Apps Now.
> Build and deploy apps & Web services for Linux with
> a free DVD software kit from IBM. Click Now!
> http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] D-Link DBT-120

[Marcel Holtmann]

Hi Gene,

> Disregard my previous post. 2.6.4-rc1-mm2 has fixed this problem.

I had now the same problem with 2.6.4-rc2. Please try to find the patch
from 2.6.4-rc1-mm2 that fixes your problem, because this needs to be
send to Linus before he releases 2.6.4 (final).

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] D-Link DBT-120

[Marcel Holtmann]

Hi Gene,

> Marcel, I am not sure which patch fixes this but I was rebooting once
> and pulled the DBT-120 out and got an oops or whatever. As much as I
> could see looked like it may be the USB stuff.

what kind of USB host controller driver do you use? What do lspci say?

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] D-Link DBT-120

[Gene Imes]

On Fri, 2004-03-05 at 10:11, Marcel Holtmann wrote:
> Hi Gene,
> 
> > Marcel, I am not sure which patch fixes this but I was rebooting once
> > and pulled the DBT-120 out and got an oops or whatever. As much as I
> > could see looked like it may be the USB stuff.
> 
> what kind of USB host controller driver do you use? What do lspci say?

Hope this helps.

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y


root@tr1a:/usr/src# lspci
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
0000:00:00.1 System peripheral: Intel Corp.: Unknown device 3584 (rev
02)
0000:00:00.3 System peripheral: Intel Corp.: Unknown device 3585 (rev
02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM
Integrated Graphics Device (rev 02)
0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated
Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller
(rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM Ultra ATA Storage
Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97
Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 03)
0000:02:05.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev b8)
0000:02:05.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C551 IEEE 1394
Controller
0000:02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (MOB)
Ethernet Controller (rev 83)
0000:02:0b.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B
Mini PCI Adapter (rev 04)

Gene



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] D-Link DBT-120

[Marcel Holtmann]

Hi Gene,

> > what kind of USB host controller driver do you use? What do lspci say?
> 
> Hope this helps.
> 
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=y
> # CONFIG_USB_EHCI_SPLIT_ISO is not set
> # CONFIG_USB_OHCI_HCD is not set
> CONFIG_USB_UHCI_HCD=y

Alan Stern is working on a better UHCI support that could explain it and
there was a unlink-while-submit patch for the OHCI driver I use. Please
check the latest 2.6.4-bk kernel and if it you still have a problem on
unplug post it to the USB mailing list, so some of the patches from the
-mm branch are forwarded for inclusion.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users