From: greg@kroah.com (Greg KH)
To: linux-kernel@vger.kernel.org, sensors@stimpy.netroedge.com
Subject: [PATCH] i2c driver fixes for 2.6.4
Date: Thu, 19 May 2005 06:24:47 +0000 [thread overview]
Message-ID: <10793913932371@kroah.com> (raw)
In-Reply-To: <10793913921925@kroah.com>
In-Reply-To: <10793913903814@kroah.com>
ChangeSet 1.1597.1.10, 2004/03/01 11:27:29-08:00, komoriya@paken.org
[PATCH] I2C: it87 reset option
I wrote a patch which adds reset option to the it87 driver talking
with Jean Delvare.
* Do not reset the registers unless users want to do because
resetting registers makes all fans go to full power and we can
usually rely on values set by BIOS
* Remove all limit initializations as they should be done from
user-space
* Better register mask for start of monitoring
drivers/i2c/chips/it87.c | 162 +++++++++++------------------------------------
1 files changed, 38 insertions(+), 124 deletions(-)
diff -Nru a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c
--- a/drivers/i2c/chips/it87.c Mon Mar 15 14:35:47 2004
+++ b/drivers/i2c/chips/it87.c Mon Mar 15 14:35:47 2004
@@ -55,7 +55,10 @@
/* Update battery voltage after every reading if true */
-static int update_vbat = 0;
+static int update_vbat;
+
+/* Reset the registers on init if true */
+static int reset;
/* Many IT87 constants specified below */
@@ -129,61 +132,6 @@
}
#define DIV_FROM_REG(val) (1 << (val))
-/* Initial limits. Use the config file to set better limits. */
-#define IT87_INIT_IN_0 170
-#define IT87_INIT_IN_1 250
-#define IT87_INIT_IN_2 (330 / 2)
-#define IT87_INIT_IN_3 (((500) * 100)/168)
-#define IT87_INIT_IN_4 (((1200) * 10)/38)
-#define IT87_INIT_IN_5 (((1200) * 10)/72)
-#define IT87_INIT_IN_6 (((500) * 10)/56)
-#define IT87_INIT_IN_7 (((500) * 100)/168)
-
-#define IT87_INIT_IN_PERCENTAGE 10
-
-#define IT87_INIT_IN_MIN_0 \
- (IT87_INIT_IN_0 - IT87_INIT_IN_0 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_0 \
- (IT87_INIT_IN_0 + IT87_INIT_IN_0 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_1 \
- (IT87_INIT_IN_1 - IT87_INIT_IN_1 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_1 \
- (IT87_INIT_IN_1 + IT87_INIT_IN_1 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_2 \
- (IT87_INIT_IN_2 - IT87_INIT_IN_2 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_2 \
- (IT87_INIT_IN_2 + IT87_INIT_IN_2 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_3 \
- (IT87_INIT_IN_3 - IT87_INIT_IN_3 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_3 \
- (IT87_INIT_IN_3 + IT87_INIT_IN_3 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_4 \
- (IT87_INIT_IN_4 - IT87_INIT_IN_4 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_4 \
- (IT87_INIT_IN_4 + IT87_INIT_IN_4 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_5 \
- (IT87_INIT_IN_5 - IT87_INIT_IN_5 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_5 \
- (IT87_INIT_IN_5 + IT87_INIT_IN_5 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_6 \
- (IT87_INIT_IN_6 - IT87_INIT_IN_6 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_6 \
- (IT87_INIT_IN_6 + IT87_INIT_IN_6 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_7 \
- (IT87_INIT_IN_7 - IT87_INIT_IN_7 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_7 \
- (IT87_INIT_IN_7 + IT87_INIT_IN_7 * IT87_INIT_IN_PERCENTAGE / 100)
-
-#define IT87_INIT_FAN_MIN_1 3000
-#define IT87_INIT_FAN_MIN_2 3000
-#define IT87_INIT_FAN_MIN_3 3000
-
-#define IT87_INIT_TEMP_HIGH_1 600
-#define IT87_INIT_TEMP_LOW_1 200
-#define IT87_INIT_TEMP_HIGH_2 600
-#define IT87_INIT_TEMP_LOW_2 200
-#define IT87_INIT_TEMP_HIGH_3 600
-#define IT87_INIT_TEMP_LOW_3 200
/* For each registered IT87, we need to keep some data in memory. That
data is pointed to by it87_list[NR]->data. The structure itself is
@@ -822,80 +770,44 @@
return i2c_smbus_write_byte_data(client, reg, value);
}
-/* Called when we have found a new IT87. It should set limits, etc. */
+/* Called when we have found a new IT87. */
static void it87_init_client(struct i2c_client *client, struct it87_data *data)
{
- /* Reset all except Watchdog values and last conversion values
- This sets fan-divs to 2, among others */
- it87_write_value(client, IT87_REG_CONFIG, 0x80);
- it87_write_value(client, IT87_REG_VIN_MIN(0),
- IN_TO_REG(IT87_INIT_IN_MIN_0));
- it87_write_value(client, IT87_REG_VIN_MAX(0),
- IN_TO_REG(IT87_INIT_IN_MAX_0));
- it87_write_value(client, IT87_REG_VIN_MIN(1),
- IN_TO_REG(IT87_INIT_IN_MIN_1));
- it87_write_value(client, IT87_REG_VIN_MAX(1),
- IN_TO_REG(IT87_INIT_IN_MAX_1));
- it87_write_value(client, IT87_REG_VIN_MIN(2),
- IN_TO_REG(IT87_INIT_IN_MIN_2));
- it87_write_value(client, IT87_REG_VIN_MAX(2),
- IN_TO_REG(IT87_INIT_IN_MAX_2));
- it87_write_value(client, IT87_REG_VIN_MIN(3),
- IN_TO_REG(IT87_INIT_IN_MIN_3));
- it87_write_value(client, IT87_REG_VIN_MAX(3),
- IN_TO_REG(IT87_INIT_IN_MAX_3));
- it87_write_value(client, IT87_REG_VIN_MIN(4),
- IN_TO_REG(IT87_INIT_IN_MIN_4));
- it87_write_value(client, IT87_REG_VIN_MAX(4),
- IN_TO_REG(IT87_INIT_IN_MAX_4));
- it87_write_value(client, IT87_REG_VIN_MIN(5),
- IN_TO_REG(IT87_INIT_IN_MIN_5));
- it87_write_value(client, IT87_REG_VIN_MAX(5),
- IN_TO_REG(IT87_INIT_IN_MAX_5));
- it87_write_value(client, IT87_REG_VIN_MIN(6),
- IN_TO_REG(IT87_INIT_IN_MIN_6));
- it87_write_value(client, IT87_REG_VIN_MAX(6),
- IN_TO_REG(IT87_INIT_IN_MAX_6));
- it87_write_value(client, IT87_REG_VIN_MIN(7),
- IN_TO_REG(IT87_INIT_IN_MIN_7));
- it87_write_value(client, IT87_REG_VIN_MAX(7),
- IN_TO_REG(IT87_INIT_IN_MAX_7));
- /* Note: Battery voltage does not have limit registers */
- it87_write_value(client, IT87_REG_FAN_MIN(0),
- FAN_TO_REG(IT87_INIT_FAN_MIN_1, 2));
- it87_write_value(client, IT87_REG_FAN_MIN(1),
- FAN_TO_REG(IT87_INIT_FAN_MIN_2, 2));
- it87_write_value(client, IT87_REG_FAN_MIN(2),
- FAN_TO_REG(IT87_INIT_FAN_MIN_3, 2));
- it87_write_value(client, IT87_REG_TEMP_HIGH(0),
- TEMP_TO_REG(IT87_INIT_TEMP_HIGH_1));
- it87_write_value(client, IT87_REG_TEMP_LOW(0),
- TEMP_TO_REG(IT87_INIT_TEMP_LOW_1));
- it87_write_value(client, IT87_REG_TEMP_HIGH(1),
- TEMP_TO_REG(IT87_INIT_TEMP_HIGH_2));
- it87_write_value(client, IT87_REG_TEMP_LOW(1),
- TEMP_TO_REG(IT87_INIT_TEMP_LOW_2));
- it87_write_value(client, IT87_REG_TEMP_HIGH(2),
- TEMP_TO_REG(IT87_INIT_TEMP_HIGH_3));
- it87_write_value(client, IT87_REG_TEMP_LOW(2),
- TEMP_TO_REG(IT87_INIT_TEMP_LOW_3));
-
- /* Enable voltage monitors */
- it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff);
-
- /* Enable Temp1-Temp3 */
- data->sensor = (it87_read_value(client, IT87_REG_TEMP_ENABLE) & 0xc0);
- data->sensor |= 0x2a; /* Temp1,Temp3=thermistor; Temp2=thermal diode */
- it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor);
+ int tmp;
- /* Enable fans */
- it87_write_value(client, IT87_REG_FAN_CTRL,
- (it87_read_value(client, IT87_REG_FAN_CTRL) & 0x8f)
- | 0x70);
+ if (reset) {
+ /* Reset all except Watchdog values and last conversion values
+ This sets fan-divs to 2, among others */
+ it87_write_value(client, IT87_REG_CONFIG, 0x80);
+ }
+
+ /* Check if temperature channnels are reset manually or by some reason */
+ tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+ if ((tmp & 0x3f) = 0) {
+ /* Temp1,Temp3=thermistor; Temp2=thermal diode */
+ tmp = (tmp & 0xc0) | 0x2a;
+ it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp);
+ }
+ data->sensor = tmp;
+
+ /* Check if voltage monitors are reset manually or by some reason */
+ tmp = it87_read_value(client, IT87_REG_VIN_ENABLE);
+ if ((tmp & 0xff) = 0) {
+ /* Enable all voltage monitors */
+ it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff);
+ }
+
+ /* Check if tachometers are reset manually or by some reason */
+ tmp = it87_read_value(client, IT87_REG_FAN_CTRL);
+ if ((tmp & 0x70) = 0) {
+ /* Enable all fan tachometers */
+ tmp = (tmp & 0x8f) | 0x70;
+ it87_write_value(client, IT87_REG_FAN_CTRL, tmp);
+ }
/* Start monitoring */
it87_write_value(client, IT87_REG_CONFIG,
- (it87_read_value(client, IT87_REG_CONFIG) & 0xb7)
+ (it87_read_value(client, IT87_REG_CONFIG) & 0x36)
| (update_vbat ? 0x41 : 0x01));
}
@@ -988,6 +900,8 @@
MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver");
MODULE_PARM(update_vbat, "i");
MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
+MODULE_PARM(reset, "i");
+MODULE_PARM_DESC(reset, "Reset the chip's registers, default no");
MODULE_LICENSE("GPL");
module_init(sm_it87_init);
WARNING: multiple messages have this Message-ID (diff)
From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org, sensors@stimpy.netroedge.com
Subject: Re: [PATCH] i2c driver fixes for 2.6.4
Date: Mon, 15 Mar 2004 14:56:33 -0800 [thread overview]
Message-ID: <10793913932371@kroah.com> (raw)
In-Reply-To: <10793913921925@kroah.com>
ChangeSet 1.1597.1.10, 2004/03/01 11:27:29-08:00, komoriya@paken.org
[PATCH] I2C: it87 reset option
I wrote a patch which adds reset option to the it87 driver talking
with Jean Delvare.
* Do not reset the registers unless users want to do because
resetting registers makes all fans go to full power and we can
usually rely on values set by BIOS
* Remove all limit initializations as they should be done from
user-space
* Better register mask for start of monitoring
drivers/i2c/chips/it87.c | 162 +++++++++++------------------------------------
1 files changed, 38 insertions(+), 124 deletions(-)
diff -Nru a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c
--- a/drivers/i2c/chips/it87.c Mon Mar 15 14:35:47 2004
+++ b/drivers/i2c/chips/it87.c Mon Mar 15 14:35:47 2004
@@ -55,7 +55,10 @@
/* Update battery voltage after every reading if true */
-static int update_vbat = 0;
+static int update_vbat;
+
+/* Reset the registers on init if true */
+static int reset;
/* Many IT87 constants specified below */
@@ -129,61 +132,6 @@
}
#define DIV_FROM_REG(val) (1 << (val))
-/* Initial limits. Use the config file to set better limits. */
-#define IT87_INIT_IN_0 170
-#define IT87_INIT_IN_1 250
-#define IT87_INIT_IN_2 (330 / 2)
-#define IT87_INIT_IN_3 (((500) * 100)/168)
-#define IT87_INIT_IN_4 (((1200) * 10)/38)
-#define IT87_INIT_IN_5 (((1200) * 10)/72)
-#define IT87_INIT_IN_6 (((500) * 10)/56)
-#define IT87_INIT_IN_7 (((500) * 100)/168)
-
-#define IT87_INIT_IN_PERCENTAGE 10
-
-#define IT87_INIT_IN_MIN_0 \
- (IT87_INIT_IN_0 - IT87_INIT_IN_0 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_0 \
- (IT87_INIT_IN_0 + IT87_INIT_IN_0 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_1 \
- (IT87_INIT_IN_1 - IT87_INIT_IN_1 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_1 \
- (IT87_INIT_IN_1 + IT87_INIT_IN_1 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_2 \
- (IT87_INIT_IN_2 - IT87_INIT_IN_2 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_2 \
- (IT87_INIT_IN_2 + IT87_INIT_IN_2 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_3 \
- (IT87_INIT_IN_3 - IT87_INIT_IN_3 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_3 \
- (IT87_INIT_IN_3 + IT87_INIT_IN_3 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_4 \
- (IT87_INIT_IN_4 - IT87_INIT_IN_4 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_4 \
- (IT87_INIT_IN_4 + IT87_INIT_IN_4 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_5 \
- (IT87_INIT_IN_5 - IT87_INIT_IN_5 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_5 \
- (IT87_INIT_IN_5 + IT87_INIT_IN_5 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_6 \
- (IT87_INIT_IN_6 - IT87_INIT_IN_6 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_6 \
- (IT87_INIT_IN_6 + IT87_INIT_IN_6 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MIN_7 \
- (IT87_INIT_IN_7 - IT87_INIT_IN_7 * IT87_INIT_IN_PERCENTAGE / 100)
-#define IT87_INIT_IN_MAX_7 \
- (IT87_INIT_IN_7 + IT87_INIT_IN_7 * IT87_INIT_IN_PERCENTAGE / 100)
-
-#define IT87_INIT_FAN_MIN_1 3000
-#define IT87_INIT_FAN_MIN_2 3000
-#define IT87_INIT_FAN_MIN_3 3000
-
-#define IT87_INIT_TEMP_HIGH_1 600
-#define IT87_INIT_TEMP_LOW_1 200
-#define IT87_INIT_TEMP_HIGH_2 600
-#define IT87_INIT_TEMP_LOW_2 200
-#define IT87_INIT_TEMP_HIGH_3 600
-#define IT87_INIT_TEMP_LOW_3 200
/* For each registered IT87, we need to keep some data in memory. That
data is pointed to by it87_list[NR]->data. The structure itself is
@@ -822,80 +770,44 @@
return i2c_smbus_write_byte_data(client, reg, value);
}
-/* Called when we have found a new IT87. It should set limits, etc. */
+/* Called when we have found a new IT87. */
static void it87_init_client(struct i2c_client *client, struct it87_data *data)
{
- /* Reset all except Watchdog values and last conversion values
- This sets fan-divs to 2, among others */
- it87_write_value(client, IT87_REG_CONFIG, 0x80);
- it87_write_value(client, IT87_REG_VIN_MIN(0),
- IN_TO_REG(IT87_INIT_IN_MIN_0));
- it87_write_value(client, IT87_REG_VIN_MAX(0),
- IN_TO_REG(IT87_INIT_IN_MAX_0));
- it87_write_value(client, IT87_REG_VIN_MIN(1),
- IN_TO_REG(IT87_INIT_IN_MIN_1));
- it87_write_value(client, IT87_REG_VIN_MAX(1),
- IN_TO_REG(IT87_INIT_IN_MAX_1));
- it87_write_value(client, IT87_REG_VIN_MIN(2),
- IN_TO_REG(IT87_INIT_IN_MIN_2));
- it87_write_value(client, IT87_REG_VIN_MAX(2),
- IN_TO_REG(IT87_INIT_IN_MAX_2));
- it87_write_value(client, IT87_REG_VIN_MIN(3),
- IN_TO_REG(IT87_INIT_IN_MIN_3));
- it87_write_value(client, IT87_REG_VIN_MAX(3),
- IN_TO_REG(IT87_INIT_IN_MAX_3));
- it87_write_value(client, IT87_REG_VIN_MIN(4),
- IN_TO_REG(IT87_INIT_IN_MIN_4));
- it87_write_value(client, IT87_REG_VIN_MAX(4),
- IN_TO_REG(IT87_INIT_IN_MAX_4));
- it87_write_value(client, IT87_REG_VIN_MIN(5),
- IN_TO_REG(IT87_INIT_IN_MIN_5));
- it87_write_value(client, IT87_REG_VIN_MAX(5),
- IN_TO_REG(IT87_INIT_IN_MAX_5));
- it87_write_value(client, IT87_REG_VIN_MIN(6),
- IN_TO_REG(IT87_INIT_IN_MIN_6));
- it87_write_value(client, IT87_REG_VIN_MAX(6),
- IN_TO_REG(IT87_INIT_IN_MAX_6));
- it87_write_value(client, IT87_REG_VIN_MIN(7),
- IN_TO_REG(IT87_INIT_IN_MIN_7));
- it87_write_value(client, IT87_REG_VIN_MAX(7),
- IN_TO_REG(IT87_INIT_IN_MAX_7));
- /* Note: Battery voltage does not have limit registers */
- it87_write_value(client, IT87_REG_FAN_MIN(0),
- FAN_TO_REG(IT87_INIT_FAN_MIN_1, 2));
- it87_write_value(client, IT87_REG_FAN_MIN(1),
- FAN_TO_REG(IT87_INIT_FAN_MIN_2, 2));
- it87_write_value(client, IT87_REG_FAN_MIN(2),
- FAN_TO_REG(IT87_INIT_FAN_MIN_3, 2));
- it87_write_value(client, IT87_REG_TEMP_HIGH(0),
- TEMP_TO_REG(IT87_INIT_TEMP_HIGH_1));
- it87_write_value(client, IT87_REG_TEMP_LOW(0),
- TEMP_TO_REG(IT87_INIT_TEMP_LOW_1));
- it87_write_value(client, IT87_REG_TEMP_HIGH(1),
- TEMP_TO_REG(IT87_INIT_TEMP_HIGH_2));
- it87_write_value(client, IT87_REG_TEMP_LOW(1),
- TEMP_TO_REG(IT87_INIT_TEMP_LOW_2));
- it87_write_value(client, IT87_REG_TEMP_HIGH(2),
- TEMP_TO_REG(IT87_INIT_TEMP_HIGH_3));
- it87_write_value(client, IT87_REG_TEMP_LOW(2),
- TEMP_TO_REG(IT87_INIT_TEMP_LOW_3));
-
- /* Enable voltage monitors */
- it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff);
-
- /* Enable Temp1-Temp3 */
- data->sensor = (it87_read_value(client, IT87_REG_TEMP_ENABLE) & 0xc0);
- data->sensor |= 0x2a; /* Temp1,Temp3=thermistor; Temp2=thermal diode */
- it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor);
+ int tmp;
- /* Enable fans */
- it87_write_value(client, IT87_REG_FAN_CTRL,
- (it87_read_value(client, IT87_REG_FAN_CTRL) & 0x8f)
- | 0x70);
+ if (reset) {
+ /* Reset all except Watchdog values and last conversion values
+ This sets fan-divs to 2, among others */
+ it87_write_value(client, IT87_REG_CONFIG, 0x80);
+ }
+
+ /* Check if temperature channnels are reset manually or by some reason */
+ tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+ if ((tmp & 0x3f) == 0) {
+ /* Temp1,Temp3=thermistor; Temp2=thermal diode */
+ tmp = (tmp & 0xc0) | 0x2a;
+ it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp);
+ }
+ data->sensor = tmp;
+
+ /* Check if voltage monitors are reset manually or by some reason */
+ tmp = it87_read_value(client, IT87_REG_VIN_ENABLE);
+ if ((tmp & 0xff) == 0) {
+ /* Enable all voltage monitors */
+ it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff);
+ }
+
+ /* Check if tachometers are reset manually or by some reason */
+ tmp = it87_read_value(client, IT87_REG_FAN_CTRL);
+ if ((tmp & 0x70) == 0) {
+ /* Enable all fan tachometers */
+ tmp = (tmp & 0x8f) | 0x70;
+ it87_write_value(client, IT87_REG_FAN_CTRL, tmp);
+ }
/* Start monitoring */
it87_write_value(client, IT87_REG_CONFIG,
- (it87_read_value(client, IT87_REG_CONFIG) & 0xb7)
+ (it87_read_value(client, IT87_REG_CONFIG) & 0x36)
| (update_vbat ? 0x41 : 0x01));
}
@@ -988,6 +900,8 @@
MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver");
MODULE_PARM(update_vbat, "i");
MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
+MODULE_PARM(reset, "i");
+MODULE_PARM_DESC(reset, "Reset the chip's registers, default no");
MODULE_LICENSE("GPL");
module_init(sm_it87_init);
next prev parent reply other threads:[~2005-05-19 6:24 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-15 22:48 [BK PATCH] i2c driver fixes for 2.6.4 Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` [PATCH] " Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH [this message]
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2005-05-19 6:24 ` Greg KH
2004-03-15 22:56 ` Greg KH
2004-03-15 22:56 ` Greg KH
2004-03-15 22:56 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10793913932371@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sensors@stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.