Creating rules without the /sbin/iptables command?

Creating rules without the /sbin/iptables command?

[Victor Julien]

Hi,

I'm writing a tool for creating a rulesset. It's meant for users who do 
understand the way a firewall works, but don't have any 
netfilter-specific knowledge. It can output a bash-script or create the 
rules itself.

My program (written in c) creates rules by opening a pipe to 
/sbin/iptables. However this is quite slow with large rulessets and on 
slow hardware. Is there another way, like an iptables librarycall or 
something? I'm going to release the tool under the GPL soon, so that 
shouldn't be a problem.

Regards,
Victor

Re: Creating rules without the /sbin/iptables command?

[Cedric Blancher]

Le mer 17/03/2004 à 19:46, Victor Julien a écrit :
> My program (written in c) creates rules by opening a pipe to 
> /sbin/iptables. However this is quite slow with large rulessets and on 
> slow hardware. Is there another way, like an iptables librarycall or 
> something?

You could use iptables libs that stand in /usr/lib/iptables, just like
iptables does.

You should however ask netfilter developpers mailing list.

Cc : netfilter-devel@lists.netfilter.org

-- 
http://www.netexit.com/~sid/
PGP KeyID: 157E98EE FingerPrint: FA62226DA9E72FA8AECAA240008B480E157E98EE
>> Hi! I'm your friendly neighbourhood signature virus.
>> Copy me to your signature file and help me spread!

Re: Creating rules without the /sbin/iptables command?

[Victor Julien]

Hi Cedric,

Okay, thanx i will do that. I thought that netfilter-devel was only for 
development of netfilter itself. My bad ;)

By the way, are the iptables libs in /usr/lib/iptables meant for use by 
third party tools, or is this considered a dirty hack?

Regards,
Victor

Cedric Blancher wrote:
> Le mer 17/03/2004 à 19:46, Victor Julien a écrit :
> 
>>My program (written in c) creates rules by opening a pipe to 
>>/sbin/iptables. However this is quite slow with large rulessets and on 
>>slow hardware. Is there another way, like an iptables librarycall or 
>>something?
> 
> 
> You could use iptables libs that stand in /usr/lib/iptables, just like
> iptables does.
> 
> You should however ask netfilter developpers mailing list.
> 
> Cc : netfilter-devel@lists.netfilter.org
> 

Re: Creating rules without the /sbin/iptables command?

[Cedric Blancher]

Le mer 17/03/2004 à 21:59, Victor Julien a écrit :
> Okay, thanx i will do that. I thought that netfilter-devel was only for 
> development of netfilter itself. My bad ;)

No, you can discuss third party tools development around iptables stuff
also.

> By the way, are the iptables libs in /usr/lib/iptables meant for use by 
> third party tools, or is this considered a dirty hack?

They are meant to be used by iptables itself. But you can use them with
your own soft. That's no dirty hack.

-- 
http://www.netexit.com/~sid/
PGP KeyID: 157E98EE FingerPrint: FA62226DA9E72FA8AECAA240008B480E157E98EE
>> Hi! I'm your friendly neighbourhood signature virus.
>> Copy me to your signature file and help me spread!

Re: Creating rules without the /sbin/iptables command?

[Henrik Nordstrom]

On Wed, 17 Mar 2004, Cedric Blancher wrote:

> Le mer 17/03/2004 à 19:46, Victor Julien a écrit :
> > My program (written in c) creates rules by opening a pipe to 
> > /sbin/iptables. However this is quite slow with large rulessets and on 
> > slow hardware. Is there another way, like an iptables librarycall or 
> > something?
> 
> You could use iptables libs that stand in /usr/lib/iptables, just like
> iptables does.

Or actually the preferred interface for this type of operations is to use 
iptables-restore, the batch version of iptables. The speed difference from 
using iptables-restore and direct calls is pretty minimal by any means.

libiptc is an internal interface of the iptables source tree and is
subject to change at any time. This should not be used directly unless you 
have very good reasons.

Regards
Henrik

Re: Creating rules without the /sbin/iptables command?

[Henrik Nordstrom]

On Wed, 17 Mar 2004, Cedric Blancher wrote:

> Le mer 17/03/2004 à 19:46, Victor Julien a écrit :
> > My program (written in c) creates rules by opening a pipe to 
> > /sbin/iptables. However this is quite slow with large rulessets and on 
> > slow hardware. Is there another way, like an iptables librarycall or 
> > something?
> 
> You could use iptables libs that stand in /usr/lib/iptables, just like
> iptables does.

Or actually the preferred interface for this type of operations is to use 
iptables-restore, the batch version of iptables. The speed difference from 
using iptables-restore and direct calls is pretty minimal by any means.

libiptc is an internal interface of the iptables source tree and is
subject to change at any time. This should not be used directly unless you 
have very good reasons.

Regards
Henrik

Re: Creating rules without the /sbin/iptables command?

[Victor Julien]

Hi Hendrik,

This might be a big improvement, but it leaves me with one possible 
problem. When adding and removing rules on-the-fly i can't use this 
method, right?

Wouldn't it be nice if there was an c function which i could call, which 
would do all the checking and other stuff the commandline iptables does, 
  but, because its a c-function, way faster? Would it be easy (or even 
possible) to implement such a function?

Regards,
Victor

Henrik Nordstrom wrote:
> On Wed, 17 Mar 2004, Cedric Blancher wrote:
> 
> 
>>Le mer 17/03/2004 à 19:46, Victor Julien a écrit :
>>
>>>My program (written in c) creates rules by opening a pipe to 
>>>/sbin/iptables. However this is quite slow with large rulessets and on 
>>>slow hardware. Is there another way, like an iptables librarycall or 
>>>something?
>>
>>You could use iptables libs that stand in /usr/lib/iptables, just like
>>iptables does.
> 
> 
> Or actually the preferred interface for this type of operations is to use 
> iptables-restore, the batch version of iptables. The speed difference from 
> using iptables-restore and direct calls is pretty minimal by any means.
> 
> libiptc is an internal interface of the iptables source tree and is
> subject to change at any time. This should not be used directly unless you 
> have very good reasons.
> 
> Regards
> Henrik
> 

Re: Creating rules without the /sbin/iptables command?

[John A. Sullivan III]

I use it all the time in the ISCS project -- just remember to use the -n
argument.  It is much, much faster.  However, you need to supply the
input file in the proper and not well documented format - John

On Wed, 2004-03-17 at 16:53, Victor Julien wrote:
> Hi Hendrik,
> 
> This might be a big improvement, but it leaves me with one possible 
> problem. When adding and removing rules on-the-fly i can't use this 
> method, right?
> 
> Wouldn't it be nice if there was an c function which i could call, which 
> would do all the checking and other stuff the commandline iptables does, 
>   but, because its a c-function, way faster? Would it be easy (or even 
> possible) to implement such a function?
> 
> Regards,
> Victor
> 
> Henrik Nordstrom wrote:
> > On Wed, 17 Mar 2004, Cedric Blancher wrote:
> > 
> > 
> >>Le mer 17/03/2004 à 19:46, Victor Julien a écrit :
> >>
> >>>My program (written in c) creates rules by opening a pipe to 
> >>>/sbin/iptables. However this is quite slow with large rulessets and on 
> >>>slow hardware. Is there another way, like an iptables librarycall or 
> >>>something?
> >>
> >>You could use iptables libs that stand in /usr/lib/iptables, just like
> >>iptables does.
> > 
> > 
> > Or actually the preferred interface for this type of operations is to use 
> > iptables-restore, the batch version of iptables. The speed difference from 
> > using iptables-restore and direct calls is pretty minimal by any means.
> > 
> > libiptc is an internal interface of the iptables source tree and is
> > subject to change at any time. This should not be used directly unless you 
> > have very good reasons.
> > 
> > Regards
> > Henrik
> > 
-- 
John A. Sullivan III
Chief Technology Officer
Nexus Management
+1 207-985-7880
john.sullivan@nexusmgmt.com

Re: Creating rules without the /sbin/iptables command?

[Henrik Nordstrom]

On Wed, 17 Mar 2004, Victor Julien wrote:

> This might be a big improvement, but it leaves me with one possible 
> problem. When adding and removing rules on-the-fly i can't use this 
> method, right?

You can. There is a --noflush option to iptables-restore to not flush the
existing rules, allowing you to use iptables-restore to add/modify/delete
existing rules without having to specify the whole ruleset.

> Wouldn't it be nice if there was an c function which i could call, which 
> would do all the checking and other stuff the commandline iptables does, 
>   but, because its a c-function, way faster? Would it be easy (or even 
> possible) to implement such a function?

Such C function would only be marginally faster than having a pipe to 
iptables-restore.

iptables-restore has the exact same capabilities as iptables, only 
difference is that iptables-restore is batch oriented compiling all your 
changes and then uploading them into the kernel in one single call while 
iptables makes one modification to the table per call.

iptables-restore accepts the exact same set of commands as iptables with 
only some minor syntactical sugar differences

Syntax for iptables-restore input is

*tablename
start working on rules in table "tablename". Equivalent to the -t option 
to iptables.

:chainname policy
specifies the default policy for chain "chainname". Equivalent to the 
iptables -P command. Probably also works just fine to use the -P command 
but I have not tried.

COMMIT
Uploads the current table (specified by *tablename) to the kernel.

#....
Input lines starting with # are assumed to be comments and are ignored

Any other lines are assumed to be iptables commands per the iptables 
syntax specification.

iptables commands may be prefixed by [packetcnt:bytecnt] which gets
automatically translated into --set-counters packetcnt bytecnt before the
command is executed within iptables-restore. The two syntaxes are
equivalent.


Don't be fooled by the fact that iptables-save only uses the -A command or
by the name iptables-restore. What iptables-restore is is a batch version
of iptables with all the capabilities of iptables, not just a tool to
restore complete tables saved by iptables-save.

Regards
Henrik

Re: Creating rules without the /sbin/iptables command?

[John A. Sullivan III]

On Wed, 2004-03-17 at 18:45, Henrik Nordstrom wrote:
> On Wed, 17 Mar 2004, Victor Julien wrote:
> 
> > This might be a big improvement, but it leaves me with one possible 
> > problem. When adding and removing rules on-the-fly i can't use this 
> > method, right?
> 
> You can. There is a --noflush option to iptables-restore to not flush the
> existing rules, allowing you to use iptables-restore to add/modify/delete
> existing rules without having to specify the whole ruleset.
> 
> > Wouldn't it be nice if there was an c function which i could call, which 
> > would do all the checking and other stuff the commandline iptables does, 
> >   but, because its a c-function, way faster? Would it be easy (or even 
> > possible) to implement such a function?
> 
> Such C function would only be marginally faster than having a pipe to 
> iptables-restore.
> 
> iptables-restore has the exact same capabilities as iptables, only 
> difference is that iptables-restore is batch oriented compiling all your 
> changes and then uploading them into the kernel in one single call while 
> iptables makes one modification to the table per call.
> 
> iptables-restore accepts the exact same set of commands as iptables with 
> only some minor syntactical sugar differences
> 
> Syntax for iptables-restore input is
> 
> *tablename
> start working on rules in table "tablename". Equivalent to the -t option 
> to iptables.
> 
> :chainname policy
> specifies the default policy for chain "chainname". Equivalent to the 
> iptables -P command. Probably also works just fine to use the -P command 
> but I have not tried.
> 
> COMMIT
> Uploads the current table (specified by *tablename) to the kernel.
> 
> #....
> Input lines starting with # are assumed to be comments and are ignored
> 
> Any other lines are assumed to be iptables commands per the iptables 
> syntax specification.
> 
> iptables commands may be prefixed by [packetcnt:bytecnt] which gets
> automatically translated into --set-counters packetcnt bytecnt before the
> command is executed within iptables-restore. The two syntaxes are
> equivalent.
> 
> 
> Don't be fooled by the fact that iptables-save only uses the -A command or
> by the name iptables-restore. What iptables-restore is is a batch version
> of iptables with all the capabilities of iptables, not just a tool to
> restore complete tables saved by iptables-save.
> 
> Regards
> Henrik
I found that there were a few other differences.  As far as I can tell,
you can only have one table section per file, in other words if I have a
file such as
*nat
some rules
COMMIT
*filter
some more rules
COMMIT
*nat
some more rules
COMMIT

only the first set of NAT rules commits.  I also found that I needed to
use an explicit declaration of implicit matches, e.g.,
*filter
-A FORWARD -p 6 --dport 80 -j ACCEPT - does not work
-A FORWARD -p 6 -m tcp --dport 80 -j ACCEPT - does work
COMMIT

I did find that the performance difference for even small rule sets was
noticeable and, for large rule sets, it was absolutely stunning - John

-- 
John A. Sullivan III
Chief Technology Officer
Nexus Management
+1 207-985-7880
john.sullivan@nexusmgmt.com

Re: Creating rules without the /sbin/iptables command?

[Henrik Nordstrom]

On Wed, 17 Mar 2004, John A. Sullivan III wrote:

> I found that there were a few other differences.  As far as I can tell,
> you can only have one table section per file, in other words if I have a
> file such as
>
> *nat
> some rules
> COMMIT
> *filter
> some more rules
> COMMIT
> *nat
> some more rules
> COMMIT
>
> only the first set of NAT rules commits.

If this is the case then it is a bug somewhere, most likely in libiptc..

seems to work fine here however.. tested with

*filter
-A INPUT -p tcp --dport 45 -j ACCEPT
COMMIT
*nat
-A PREROUTING -p tcp --dport 45 -j ACCEPT
COMMIT
*filter
-A OUTPUT -j ACCEPT
COMMIT

and all three rules was added just fine.

also I do not see any reason why it should not work. The libiptc handle is 
completely closed on COMMIT so there should not be any memory of you 
already have used this table when the new *tablename is reached.

Note: when doing this you MUST use the --noflush (-n) option. If not the
second reference to the table will clear the rules added by the first..

> I also found that I needed to use an explicit declaration of implicit
> matches, e.g.,
>
> *filter
> -A FORWARD -p 6 --dport 80 -j ACCEPT - does not work
> -A FORWARD -p 6 -m tcp --dport 80 -j ACCEPT - does work
> COMMIT

Works fine here without.. and considering that the exact same iptables.c 
is used in both commands for parsing the commands I don't see why it 
should not work in any version of iptables-restore..

The fact that iptables-save prints the protocol match is only due to the
fact that this is actually what the rules looks like if you are protocol
match options.. there is some heavy duty "magics" in iptables command
parsing if a protocol is specified but no protocol match. There is an
interesting comment in iptables.c which summarises this magic protocol
match function quite well ;-)

                                /* If you listen carefully, you can
                                   actually hear this code suck. */


Regards
Henrik

Re: Creating rules without the /sbin/iptables command?

[John A. Sullivan III]

On Wed, 2004-03-17 at 20:15, Henrik Nordstrom wrote:
> On Wed, 17 Mar 2004, John A. Sullivan III wrote:
> 
> > I found that there were a few other differences.  As far as I can tell,
> > you can only have one table section per file, in other words if I have a
> > file such as
> >
> > *nat
> > some rules
> > COMMIT
> > *filter
> > some more rules
> > COMMIT
> > *nat
> > some more rules
> > COMMIT
> >
> > only the first set of NAT rules commits.
> 
> If this is the case then it is a bug somewhere, most likely in libiptc..
> 
> seems to work fine here however.. tested with
> 
> *filter
> -A INPUT -p tcp --dport 45 -j ACCEPT
> COMMIT
> *nat
> -A PREROUTING -p tcp --dport 45 -j ACCEPT
> COMMIT
> *filter
> -A OUTPUT -j ACCEPT
> COMMIT
> 
> and all three rules was added just fine.
> 
> also I do not see any reason why it should not work. The libiptc handle is 
> completely closed on COMMIT so there should not be any memory of you 
> already have used this table when the new *tablename is reached.
> 
> Note: when doing this you MUST use the --noflush (-n) option. If not the
> second reference to the table will clear the rules added by the first..
> 
> > I also found that I needed to use an explicit declaration of implicit
> > matches, e.g.,
> >
> > *filter
> > -A FORWARD -p 6 --dport 80 -j ACCEPT - does not work
> > -A FORWARD -p 6 -m tcp --dport 80 -j ACCEPT - does work
> > COMMIT
> 
> Works fine here without.. and considering that the exact same iptables.c 
> is used in both commands for parsing the commands I don't see why it 
> should not work in any version of iptables-restore..
> 
> The fact that iptables-save prints the protocol match is only due to the
> fact that this is actually what the rules looks like if you are protocol
> match options.. there is some heavy duty "magics" in iptables command
> parsing if a protocol is specified but no protocol match. There is an
> interesting comment in iptables.c which summarises this magic protocol
> match function quite well ;-)
> 
>                                 /* If you listen carefully, you can
>                                    actually hear this code suck. */
> 
> 
> Regards
> Henrik
Interesting.  Thanks for the update.  I know the last time I tested was
with a pretty old iptables - I don't know the version number as I have
long since upgraded.  Perhaps I was braincramping but I'm almost certain
it choked if I didn't use the explicit match.  Thanks again - John
-- 
John A. Sullivan III
Chief Technology Officer
Nexus Management
+1 207-985-7880
john.sullivan@nexusmgmt.com

Re: Creating rules without the /sbin/iptables command?

[Scott MacKay]

Just curious, having made my own decision to not use
the kinda-interfaces and just call the provided
iptables executables; has anyone run valgrind
(http://valgrind.kde.org/) on iptables?  I did a
simple one like:

valgrind --leak-check=yes iptables -A PREROUTING -t
mangle -s 192.168.1.0/24 -j DROP

and got a few...I would be cautious about using these
routines in a long-running app unless they were looked
at more.



__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com

Re: Creating rules without the /sbin/iptables command?

[Henrik Nordstrom]

On Wed, 17 Mar 2004, Scott MacKay wrote:

> valgrind --leak-check=yes iptables -A PREROUTING -t
> mangle -s 192.168.1.0/24 -j DROP
> 
> and got a few...I would be cautious about using these
> routines in a long-running app unless they were looked
> at more.

libiptc is not really intended for long-running applications. The only
official use of this is iptables and iptables-restore which usually does
not run for a long time, so there has not been very much attention to
memory leaks etc.. but bugfixes are usually accepted when found.

Note that the design of libiptc will indicate some static memory leaks due
to modules being loaded etc unless you compile it as a single binary.  
These leaks are not interesting to have fixed. The type of leaks
interesting to have fixed is the leaks which grows over time as more and
more operations have been executed.

Regards
Henrik

Re: Creating rules without the /sbin/iptables command?

[Victor Julien]

Henrik Nordstrom wrote:
> On Wed, 17 Mar 2004, Victor Julien wrote:
> 
> 
>>This might be a big improvement, but it leaves me with one possible 
>>problem. When adding and removing rules on-the-fly i can't use this 
>>method, right?
> 
> 
> You can. There is a --noflush option to iptables-restore to not flush the
> existing rules, allowing you to use iptables-restore to add/modify/delete
> existing rules without having to specify the whole ruleset.
> 
> 
>>Wouldn't it be nice if there was an c function which i could call, which 
>>would do all the checking and other stuff the commandline iptables does, 
>>  but, because its a c-function, way faster? Would it be easy (or even 
>>possible) to implement such a function?
> 
> 
> Such C function would only be marginally faster than having a pipe to 
> iptables-restore.
> 
> iptables-restore has the exact same capabilities as iptables, only 
> difference is that iptables-restore is batch oriented compiling all your 
> changes and then uploading them into the kernel in one single call while 
> iptables makes one modification to the table per call.
> 
> iptables-restore accepts the exact same set of commands as iptables with 
> only some minor syntactical sugar differences
> 
> Syntax for iptables-restore input is
> 
> *tablename
> start working on rules in table "tablename". Equivalent to the -t option 
> to iptables.
> 
> :chainname policy
> specifies the default policy for chain "chainname". Equivalent to the 
> iptables -P command. Probably also works just fine to use the -P command 
> but I have not tried.
> 
> COMMIT
> Uploads the current table (specified by *tablename) to the kernel.
> 
> #....
> Input lines starting with # are assumed to be comments and are ignored
> 
> Any other lines are assumed to be iptables commands per the iptables 
> syntax specification.
> 
> iptables commands may be prefixed by [packetcnt:bytecnt] which gets
> automatically translated into --set-counters packetcnt bytecnt before the
> command is executed within iptables-restore. The two syntaxes are
> equivalent.
> 
> 
> Don't be fooled by the fact that iptables-save only uses the -A command or
> by the name iptables-restore. What iptables-restore is is a batch version
> of iptables with all the capabilities of iptables, not just a tool to
> restore complete tables saved by iptables-save.
> 
> Regards
> Henrik
> 
> 

Okay, lets see if I understand what you mean. Say i have an initial 
ruleset which looks like this, loaded with 'iptables-restore':

*filter
:FORWARD DROP
-A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
-A FORWARD -p tcp -s 192.168.0.2 --dport 80 -j ACCEPT
-A FORWARD -p tcp -s 192.168.0.3 --dport 80 -j ACCEPT
COMMIT

and sometime later i want to replace 192.168.0.2 by 192.168.0.4 (in 
exacty the same place):

*filter
:FORWARD DROP
-D FORWARD -p tcp -s 192.168.0.2 --dport 80 -j ACCEPT
-I FORWARD 2 -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
COMMIT

and then 'iptables-restore -n', right?

But the easiest way is to recreate the initial ruleset with the updated 
rules would be:

*filter
:FORWARD DROP
-A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
-A FORWARD -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
-A FORWARD -p tcp -s 192.168.0.3 --dport 80 -j ACCEPT
COMMIT

and then just call iptables-restore. This way i wont have to calculate 
where i want to insert the rules, this can be quite complex on many 
changes in large rulessets. Is this correct?

The last method should still be way faster than my current method, i 
guess. Is this right?

Regards,
Victor

Re: Creating rules without the /sbin/iptables command?

[Henrik Nordstrom]

On Thu, 18 Mar 2004, Victor Julien wrote:

> Okay, lets see if I understand what you mean. Say i have an initial 
> ruleset which looks like this, loaded with 'iptables-restore':
> 
> *filter
> :FORWARD DROP
> -A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
> -A FORWARD -p tcp -s 192.168.0.2 --dport 80 -j ACCEPT
> -A FORWARD -p tcp -s 192.168.0.3 --dport 80 -j ACCEPT
> COMMIT
> 
> and sometime later i want to replace 192.168.0.2 by 192.168.0.4 (in 
> exacty the same place):
> 
> *filter
> :FORWARD DROP
> -D FORWARD -p tcp -s 192.168.0.2 --dport 80 -j ACCEPT
> -I FORWARD 2 -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
> COMMIT

Or you could

*filer
-R FORWARD 2 -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
COMMIT

> and then 'iptables-restore -n', right?

Right. Or you could even have iptables-restore -n running on a pipe 
already.. (but beware of memoryleaks in libiptc)

> But the easiest way is to recreate the initial ruleset with the updated 
> rules would be:
> 
> *filter
> :FORWARD DROP
> -A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
> -A FORWARD -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
> -A FORWARD -p tcp -s 192.168.0.3 --dport 80 -j ACCEPT
> COMMIT

Depends on your application, but yes I find this easier most times.

> The last method should still be way faster than my current method, i 
> guess. Is this right?

iptables-restore is quicker than iptables as soon as you have more than
one modification to the table. On single-rule operations it is identical
to iptables.

if you use a pipe to a already running iptables-restore then it isfaster 
than iptables even on single rule operations.

In addition iptables-restore allows you to atomically replace the complete
ruleset without race windows. This can not be done with iptables and with
iptables packets will be forwarded while the new ruleset is only
partiailly installed...

Regards
Henrik

Re: Creating rules without the /sbin/iptables command?

[Victor Julien]

Henrik Nordstrom wrote:
> On Thu, 18 Mar 2004, Victor Julien wrote:
> 
> 
>>Okay, lets see if I understand what you mean. Say i have an initial 
>>ruleset which looks like this, loaded with 'iptables-restore':
>>
>>*filter
>>:FORWARD DROP
>>-A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
>>-A FORWARD -p tcp -s 192.168.0.2 --dport 80 -j ACCEPT
>>-A FORWARD -p tcp -s 192.168.0.3 --dport 80 -j ACCEPT
>>COMMIT
>>
>>and sometime later i want to replace 192.168.0.2 by 192.168.0.4 (in 
>>exacty the same place):
>>
>>*filter
>>:FORWARD DROP
>>-D FORWARD -p tcp -s 192.168.0.2 --dport 80 -j ACCEPT
>>-I FORWARD 2 -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
>>COMMIT
> 
> 
> Or you could
> 
> *filer
> -R FORWARD 2 -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
> COMMIT
> 
>>and then 'iptables-restore -n', right?
> 
> 
> Right. Or you could even have iptables-restore -n running on a pipe 
> already.. (but beware of memoryleaks in libiptc)
> 

Okay, i think i'll rather open the pipe on demand.

>>But the easiest way is to recreate the initial ruleset with the updated 
>>rules would be:
>>
>>*filter
>>:FORWARD DROP
>>-A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
>>-A FORWARD -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
>>-A FORWARD -p tcp -s 192.168.0.3 --dport 80 -j ACCEPT
>>COMMIT
> 
> 
> Depends on your application, but yes I find this easier most times.

Good! But if i have a rule for accounting, how does it work then? If you 
consider this (useless) example:

*filter
:FORWARD DROP
# account the traffic for 192.168.0.1
-A FORWARD -p tcp -s 192.168.0.1
-A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
-A FORWARD -p tcp -s 192.168.0.2 --dport 80 -j ACCEPT
COMMIT

if i now want to reload the rule set to

*filter
:FORWARD DROP
# account the traffic for 192.168.0.1
-A FORWARD -p tcp -s 192.168.0.1
-A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
-A FORWARD -p tcp -s 192.168.0.12 --dport 80 -j ACCEPT
COMMIT

using 'iptables-restore' (without noflush) is there a way to preserve 
the accounting data from the first rule? Is this what the -c option of 
iptables-restore is for?

>>The last method should still be way faster than my current method, i 
>>guess. Is this right?
> 
> iptables-restore is quicker than iptables as soon as you have more than
> one modification to the table. On single-rule operations it is identical
> to iptables.
> 
> if you use a pipe to a already running iptables-restore then it isfaster 
> than iptables even on single rule operations.
> 
> In addition iptables-restore allows you to atomically replace the complete
> ruleset without race windows. This can not be done with iptables and with
> iptables packets will be forwarded while the new ruleset is only
> partiailly installed...
> 

Sounds like what i'm looking for...

Regards,
Victor

Re: Creating rules without the /sbin/iptables command?

[Henrik Nordstrom]

On Thu, 18 Mar 2004, Victor Julien wrote:

> using 'iptables-restore' (without noflush) is there a way to preserve 
> the accounting data from the first rule?

Then you must use incremental commands, keepint the accounting rule 
untouched.

> Is this what the -c option of iptables-restore is for?

No. This instructs iptables-restore to restore any packet/byte counters 
found in the input data. Without this option any such counters is ignored 
and the installed rules have zeroed counters.

Regards
Henrik

Re: Creating rules without the /sbin/iptables command?

[Victor Julien]

Henrik Nordstrom wrote:
> On Thu, 18 Mar 2004, Victor Julien wrote:
> 
> 
>>using 'iptables-restore' (without noflush) is there a way to preserve 
>>the accounting data from the first rule?
> 
> Then you must use incremental commands, keepint the accounting rule 
> untouched.

Hmmm, that i don't want.

> 
>>Is this what the -c option of iptables-restore is for?
> 
> No. This instructs iptables-restore to restore any packet/byte counters 
> found in the input data. Without this option any such counters is ignored 
> and the installed rules have zeroed counters.

So i have to read the current counters first by parsing 
'iptables-save'-output. And i can then recreate the rules and set the 
counters to their old values?

Using 'iptables-restore' can i flush one chain, but leave another 
untouched? If so, i can create an accounting chain which will not be 
flushed...

Regards,
Victor

> 
> Regards
> Henrik
> 

Re: Creating rules without the /sbin/iptables command?

[Henrik Nordstrom]

On Fri, 19 Mar 2004, Victor Julien wrote:

> > Then you must use incremental commands, keepint the accounting rule 
> > untouched.
> 
> Hmmm, that i don't want.

Then your other option is to dump the existing rule, parse the counter and
include this in the input.

> So i have to read the current counters first by parsing 
> 'iptables-save'-output. And i can then recreate the rules and set the 
> counters to their old values?

Yes.

> Using 'iptables-restore' can i flush one chain, but leave another 
> untouched?

Yes, by using disabling the implicit flush (--noflush option) and then 
use the flush command explicitly.

> If so, i can create an accounting chain which will not be 
> flushed...

True. Probably much better approach than what is discussed above.

Regards
Regards
Henrik

Re: Creating rules without the /sbin/iptables command?

[Victor Julien]

Henrik Nordstrom wrote:
> On Fri, 19 Mar 2004, Victor Julien wrote:
> 
> 
>>>Then you must use incremental commands, keepint the accounting rule 
>>>untouched.
>>
>>Hmmm, that i don't want.
> 
> 
> Then your other option is to dump the existing rule, parse the counter and
> include this in the input.
> 
> 
>>So i have to read the current counters first by parsing 
>>'iptables-save'-output. And i can then recreate the rules and set the 
>>counters to their old values?
> 
> 
> Yes.
> 
> 
>>Using 'iptables-restore' can i flush one chain, but leave another 
>>untouched?
> 
> 
> Yes, by using disabling the implicit flush (--noflush option) and then 
> use the flush command explicitly.
> 
> 
>>If so, i can create an accounting chain which will not be 
>>flushed...
> 
> 
> True. Probably much better approach than what is discussed above.

So the best option would be to create an accounting chain (e.g ACCOUNT). 
If i, for example, want to recreate the rules in the INPUT chain it 
should work like this:

Create a file for iptables-restore input:

*filter
:INPUT DROP
# flush this chain
-F INPUT
# now recreate the rules
-A INPUT -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
...more rules...
COMMIT

Now i would have to call 'iptables-restore --noflush'. This will clear 
the entire INPUT chain, but will leave all other (including my ACCOUNT 
chain) chains untouched.

Right?

Regards,
Victor

Re: Creating rules without the /sbin/iptables command?

[Henrik Nordstrom]

On Fri, 19 Mar 2004, Victor Julien wrote:

> So the best option would be to create an accounting chain (e.g ACCOUNT). 
> If i, for example, want to recreate the rules in the INPUT chain it 
> should work like this:
> 
> Create a file for iptables-restore input:
> 
> *filter
> :INPUT DROP
This line is redundant. You only need policy lines if you want to change 
the policy.

> # flush this chain
> -F INPUT
> # now recreate the rules
> -A INPUT -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
> ...more rules...
> COMMIT
> 
> Now i would have to call 'iptables-restore --noflush'. This will clear 
> the entire INPUT chain, but will leave all other (including my ACCOUNT 
> chain) chains untouched.

Correct.

But dont forget to insert a jump to the ACCOUNT chain where needed..

*filter
-F INPUT
-A INPUT -j ACCOUNT
-A INTPUT -p tcp .... -j ACCEPT
....
COMMIT

Regards
Henrik

Re: Creating rules without the /sbin/iptables command?

[Victor Julien]

Henrik Nordstrom wrote:
>>So the best option would be to create an accounting chain (e.g ACCOUNT). 
>>If i, for example, want to recreate the rules in the INPUT chain it 
>>should work like this:
>>
>>Create a file for iptables-restore input:
>>
>>*filter
>>:INPUT DROP
> 
> This line is redundant. You only need policy lines if you want to change 
> the policy.

But i do need it if i want to (re)set chain counters, right?

Like this:
:INPUT DROP [123:45678]

> 
>># flush this chain
>>-F INPUT
>># now recreate the rules
>>-A INPUT -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
>>...more rules...
>>COMMIT
>>
>>Now i would have to call 'iptables-restore --noflush'. This will clear 
>>the entire INPUT chain, but will leave all other (including my ACCOUNT 
>>chain) chains untouched.
> 
> Correct.
> 
> But dont forget to insert a jump to the ACCOUNT chain where needed..
> 
> *filter
> -F INPUT
> -A INPUT -j ACCOUNT
> -A INTPUT -p tcp .... -j ACCEPT
> ....
> COMMIT
> 
Well, i think i know all i need now, thanks a lot for your help! Now i 
stand for the daunting task of implmenting this in my current codebase ;-)

Well i guess that will have to wait a bit, my current version is quite 
stable (for me a least) and i plan to release it soon...

Regards,
Victor

Re: Creating rules without the /sbin/iptables command?

[Henrik Nordstrom]

On Fri, 19 Mar 2004, Victor Julien wrote:

> > This line is redundant. You only need policy lines if you want to change 
> > the policy.
> 
> But i do need it if i want to (re)set chain counters, right?
> 
> Like this:
> :INPUT DROP [123:45678]

Yes.

Or if you don't the old counters should be kept.

Regards
Henrik

Re: Creating rules without the /sbin/iptables command?

[John A. Sullivan III]

On Thu, 2004-03-18 at 02:25, Victor Julien wrote:
> Henrik Nordstrom wrote:
> > On Wed, 17 Mar 2004, Victor Julien wrote:
> > 
> > 
> >>This might be a big improvement, but it leaves me with one possible 
> >>problem. When adding and removing rules on-the-fly i can't use this 
> >>method, right?
> > 
> > 
> > You can. There is a --noflush option to iptables-restore to not flush the
> > existing rules, allowing you to use iptables-restore to add/modify/delete
> > existing rules without having to specify the whole ruleset.
> > 
> > 
> >>Wouldn't it be nice if there was an c function which i could call, which 
> >>would do all the checking and other stuff the commandline iptables does, 
> >>  but, because its a c-function, way faster? Would it be easy (or even 
> >>possible) to implement such a function?
> > 
> > 
> > Such C function would only be marginally faster than having a pipe to 
> > iptables-restore.
> > 
> > iptables-restore has the exact same capabilities as iptables, only 
> > difference is that iptables-restore is batch oriented compiling all your 
> > changes and then uploading them into the kernel in one single call while 
> > iptables makes one modification to the table per call.
> > 
> > iptables-restore accepts the exact same set of commands as iptables with 
> > only some minor syntactical sugar differences
> > 
> > Syntax for iptables-restore input is
> > 
> > *tablename
> > start working on rules in table "tablename". Equivalent to the -t option 
> > to iptables.
> > 
> > :chainname policy
> > specifies the default policy for chain "chainname". Equivalent to the 
> > iptables -P command. Probably also works just fine to use the -P command 
> > but I have not tried.
> > 
> > COMMIT
> > Uploads the current table (specified by *tablename) to the kernel.
> > 
> > #....
> > Input lines starting with # are assumed to be comments and are ignored
> > 
> > Any other lines are assumed to be iptables commands per the iptables 
> > syntax specification.
> > 
> > iptables commands may be prefixed by [packetcnt:bytecnt] which gets
> > automatically translated into --set-counters packetcnt bytecnt before the
> > command is executed within iptables-restore. The two syntaxes are
> > equivalent.
> > 
> > 
> > Don't be fooled by the fact that iptables-save only uses the -A command or
> > by the name iptables-restore. What iptables-restore is is a batch version
> > of iptables with all the capabilities of iptables, not just a tool to
> > restore complete tables saved by iptables-save.
> > 
> > Regards
> > Henrik
> > 
> > 
> 
> Okay, lets see if I understand what you mean. Say i have an initial 
> ruleset which looks like this, loaded with 'iptables-restore':
> 
> *filter
> :FORWARD DROP
> -A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
> -A FORWARD -p tcp -s 192.168.0.2 --dport 80 -j ACCEPT
> -A FORWARD -p tcp -s 192.168.0.3 --dport 80 -j ACCEPT
> COMMIT
> 
> and sometime later i want to replace 192.168.0.2 by 192.168.0.4 (in 
> exacty the same place):
> 
> *filter
> :FORWARD DROP
> -D FORWARD -p tcp -s 192.168.0.2 --dport 80 -j ACCEPT
> -I FORWARD 2 -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
> COMMIT
> 
> and then 'iptables-restore -n', right?
I believe that is correct although I also believe you can dispense with
the :FORWARD DROP since you already had it in the first rule set and
could also use 
-R FORWARD 2 -p tcp -s 192.168.0.4 --dport -j ACCEPT
to just replace the rule although I confess to never having tried that
in an iptables-restore file
> 
> But the easiest way is to recreate the initial ruleset with the updated 
> rules would be:
> 
> *filter
> :FORWARD DROP
> -A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
> -A FORWARD -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
> -A FORWARD -p tcp -s 192.168.0.3 --dport 80 -j ACCEPT
> COMMIT
> 
> and then just call iptables-restore. This way i wont have to calculate 
> where i want to insert the rules, this can be quite complex on many 
> changes in large rulessets. Is this correct?
Yes, although when ISCS is released (http://iscs.sourceforge.net), it
will provide an alternative to having to track rule order (massive
oversimplification here but it is not the topic at hand).
> 
> The last method should still be way faster than my current method, i 
> guess. Is this right?
I have found it to be dramatically faster - John
> 
> Regards,
> Victor
-- 
Open Source Development Corporation
Financially Sustainable open source development
http://www.opensourcedevelopmentcorp.com

Re: Creating rules without the /sbin/iptables command?

[Victor Julien]

John A. Sullivan III wrote:

<snip>

>>
>>Okay, lets see if I understand what you mean. Say i have an initial 
>>ruleset which looks like this, loaded with 'iptables-restore':
>>
>>*filter
>>:FORWARD DROP
>>-A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
>>-A FORWARD -p tcp -s 192.168.0.2 --dport 80 -j ACCEPT
>>-A FORWARD -p tcp -s 192.168.0.3 --dport 80 -j ACCEPT
>>COMMIT
>>
>>and sometime later i want to replace 192.168.0.2 by 192.168.0.4 (in 
>>exacty the same place):
>>
>>*filter
>>:FORWARD DROP
>>-D FORWARD -p tcp -s 192.168.0.2 --dport 80 -j ACCEPT
>>-I FORWARD 2 -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
>>COMMIT
>>
>>and then 'iptables-restore -n', right?
> 
> I believe that is correct although I also believe you can dispense with
> the :FORWARD DROP since you already had it in the first rule set and
> could also use 
> -R FORWARD 2 -p tcp -s 192.168.0.4 --dport -j ACCEPT
> to just replace the rule although I confess to never having tried that
> in an iptables-restore file
> 
>>But the easiest way is to recreate the initial ruleset with the updated 
>>rules would be:
>>
>>*filter
>>:FORWARD DROP
>>-A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
>>-A FORWARD -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
>>-A FORWARD -p tcp -s 192.168.0.3 --dport 80 -j ACCEPT
>>COMMIT
>>
>>and then just call iptables-restore. This way i wont have to calculate 
>>where i want to insert the rules, this can be quite complex on many 
>>changes in large rulessets. Is this correct?
> 
> Yes, although when ISCS is released (http://iscs.sourceforge.net), it
> will provide an alternative to having to track rule order (massive
> oversimplification here but it is not the topic at hand).

But how will ISCS handle this problem? Will it also create input for 
iptables-restore? Or do you have some other method?

> 
>>The last method should still be way faster than my current method, i 
>>guess. Is this right?
> 
> I have found it to be dramatically faster - John

Good!

Regards,
Victor

> 
>>Regards,
>>Victor

Re: Creating rules without the /sbin/iptables command?

[John A. Sullivan III]

On Thu, 2004-03-18 at 07:52, Victor Julien wrote:
> John A. Sullivan III wrote:
> 
> <snip>
> 
> >>
<snip>
> >>But the easiest way is to recreate the initial ruleset with the updated 
> >>rules would be:
> >>
> >>*filter
> >>:FORWARD DROP
> >>-A FORWARD -p tcp -s 192.168.0.1 --dport 80 -j ACCEPT
> >>-A FORWARD -p tcp -s 192.168.0.4 --dport 80 -j ACCEPT
> >>-A FORWARD -p tcp -s 192.168.0.3 --dport 80 -j ACCEPT
> >>COMMIT
> >>
> >>and then just call iptables-restore. This way i wont have to calculate 
> >>where i want to insert the rules, this can be quite complex on many 
> >>changes in large rulessets. Is this correct?
> > 
> > Yes, although when ISCS is released (http://iscs.sourceforge.net), it
> > will provide an alternative to having to track rule order (massive
> > oversimplification here but it is not the topic at hand).
> 
> But how will ISCS handle this problem? Will it also create input for 
> iptables-restore? Or do you have some other method?
Yes, it creates input files for iptables restore and is also able to
create configuration files for other firewalls (as well as the VPN
configuration, the router configuration, the NAT configuration and any
local DHCP configuration and, hopefully soon, all the layer2
configuration for the individual gateways). However, rather than relying
exclusively upon rule order, it uses an approach we call "Best Match". 
This allows us to automate the creation of all rules from a high level
description of the environment.  The idea is to eliminate the need for
an administrator to create rules.  Instead, we interpret the
environment, e.g., "give these three teams access to the new joint
development project data", and create consistent rules for access
control, user authentication, encryption, data authentication, routing,
NAT, etc, to produce that environment.
> 
> > 
> >>The last method should still be way faster than my current method, i 
> >>guess. Is this right?
> > 
> > I have found it to be dramatically faster - John
> 
> Good!
> 
> Regards,
> Victor
> 
> > 
> >>Regards,
> >>Victor
-- 
John A. Sullivan III
Chief Technology Officer
Nexus Management
+1 207-985-7880
john.sullivan@nexusmgmt.com

Adding packet metadata

[Scott MacKay]

Hello,
I wanted to mark up packets with information as they
pass thru the system.  Basically, I want to associate
some data with a packet during PREROUTING/raw (to read
info prior to conntrack) and then get that information
back during PREROUTING/mangle.  Is there a module
already written which could perform this?  It is not
something I would need to have accessible to the
iptables program, though I will probably need to
adjust some code to make it accessible to my ip_queue
userspace application...

-Scott

__________________________________
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
http://taxes.yahoo.com/filing.html

Re: Adding packet metadata

[Henrik Nordstrom]

On Tue, 23 Mar 2004, Scott MacKay wrote:

> I wanted to mark up packets with information as they pass thru the
> system. Basically, I want to associate some data with a packet during
> PREROUTING/raw (to read info prior to conntrack) and then get that
> information back during PREROUTING/mangle.  Is there a module already
> written which could perform this?

MARK should be able to do this.

> It is not something I would need to have accessible to the iptables
> program, though I will probably need to adjust some code to make it
> accessible to my ip_queue userspace application...

The MARK value is available (read-only) via ip_queue.

Regards
Henrik

Re: Adding packet metadata

[Mike-Ro-Chanel]

>>I wanted to mark up packets with information as they pass thru the
>>system. Basically, I want to associate some data with a packet during
>>PREROUTING/raw (to read info prior to conntrack) and then get that
>>information back during PREROUTING/mangle.  Is there a module already
>>written which could perform this?
> 
> 
> MARK should be able to do this.
> 

An interesting question about MARK field in SKB structure is: Can I use 
all 32-bit of "nfmark" for adding metadata? Iptables front-end (from 
command line) seems to take mark value as a 8-bit number.

		Mike-Ro-Chanel

Re: Adding packet metadata

[Henrik Nordstrom]

On Wed, 24 Mar 2004, Mike-Ro-Chanel wrote:

> An interesting question about MARK field in SKB structure is: Can I use 
> all 32-bit of "nfmark" for adding metadata?

Yes.

> Iptables front-end (from command line) seems to take mark value as a
> 8-bit number.

What makes you think so?

There is a slight signed bug in the string_to_number function which 
prevents the use of the 2^31 bit, easily fixed by changing it to use 
unsigned.

Regards
Henrik

Re: Adding packet metadata

[Mike-Ro-Chanel]

Henrik Nordstrom wrote:
> On Wed, 24 Mar 2004, Mike-Ro-Chanel wrote:
> 
> 
>>An interesting question about MARK field in SKB structure is: Can I use 
>>all 32-bit of "nfmark" for adding metadata?
> 
> 
> Yes.
> 
> 
>>Iptables front-end (from command line) seems to take mark value as a
>>8-bit number.
> 
> 
> What makes you think so?

Now I understand, it is my error on iptables usage.

> There is a slight signed bug in the string_to_number function which 
> prevents the use of the 2^31 bit, easily fixed by changing it to use 
> unsigned.
> 
Ok, thanks for the tip!

		Mike-Ro-Chanel

Re: Adding packet metadata

[Scott MacKay]

--- Henrik Nordstrom <hno@marasystems.com> wrote:
> On Tue, 23 Mar 2004, Scott MacKay wrote:
> 
> > I wanted to mark up packets with information as
> they pass thru the
> > system. Basically, I want to associate some data
> with a packet during
> > PREROUTING/raw (to read info prior to conntrack)
> and then get that
> > information back during PREROUTING/mangle.  Is
> there a module already
> > written which could perform this?
> 
> MARK should be able to do this.
I actually was thinking of using the MARK for a
different purpose unfortunantly.  Since it is a nice
32bit word, I was thinking of even using only part of
it, but I need it for setting up some match settings
for actual rules.

> > It is not something I would need to have
> accessible to the iptables
> > program, though I will probably need to adjust
> some code to make it
> > accessible to my ip_queue userspace application...
> 
> The MARK value is available (read-only) via
> ip_queue.
That would be my general problem.  The only bit that
seems transmitted back is the payload for evaluation
and update.  Even if I wanted to use MARK, it would
not allow me to alter the value.


__________________________________
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
http://taxes.yahoo.com/filing.html

Re: Adding packet metadata

[Henrik Nordstrom]

On Wed, 24 Mar 2004, Scott MacKay wrote:

> I actually was thinking of using the MARK for a
> different purpose unfortunantly.  Since it is a nice
> 32bit word, I was thinking of even using only part of
> it, but I need it for setting up some match settings
> for actual rules.

Then you only need a new MARK target as the existing one does not support
masked operations (only the mark match does..).


> > The MARK value is available (read-only) via
> > ip_queue.
>
> That would be my general problem.  The only bit that seems transmitted
> back is the payload for evaluation and update.  Even if I wanted to use
> MARK, it would not allow me to alter the value.

There is a patch somewhere to extend ip_queue to be able to return the 
mark.. and no matter what approach you take something similar is needed if 
you from ip_queue want to return other information than the verdict and 
optional payload substitution.

Regards
Henrik

Re: Creating rules without the /sbin/iptables command?

[John A. Sullivan III]

On Wed, 2004-03-17 at 14:25, Cedric Blancher wrote:
> Le mer 17/03/2004 à 19:46, Victor Julien a écrit :
> > My program (written in c) creates rules by opening a pipe to 
> > /sbin/iptables. However this is quite slow with large rulessets and on 
> > slow hardware. Is there another way, like an iptables librarycall or 
> > something?
> 
> You could use iptables libs that stand in /usr/lib/iptables, just like
> iptables does.
> 
> You should however ask netfilter developpers mailing list.
> 
> Cc : netfilter-devel@lists.netfilter.org
The above solution is probably better than mine but I write out my new
rules to a file in iptables-save format and then use iptables-restore -n
<filename>.  This is dramatically faster than calling iptables - John
-- 
John A. Sullivan III
Chief Technology Officer
Nexus Management
+1 207-985-7880
john.sullivan@nexusmgmt.com
---
If you are interested in helping to develop a GPL enterprise class
VPN/Firewall/Security device management console, please visit
http://iscs.sourceforge.net