* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken [not found] <A6974D8E5F98D511BB910002A50A6647615F6523@hdsmsx402.hd.intel.com> @ 2004-03-26 5:26 ` Len Brown 0 siblings, 0 replies; 16+ messages in thread From: Len Brown @ 2004-03-26 5:26 UTC (permalink / raw) To: Marc-Christian Petersen, Marcel Holtmann Cc: lkml, Andrew Morton, Linus Torvalds, Rik van Ballegooijen, ACPI Developers [-- Attachment #1: Type: text/plain, Size: 1677 bytes --] > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level) > > > ACPI: SCI (IRQ22) allocation failed > > ACPI-0133: *** Error: Unable to install System Control Interrupt > Handler, AE_NOT_ACQUIRED > > ACPI: Unable to start the ACPI Interpreter > working this issue here: > http://bugzilla.kernel.org/show_bug.cgi?id=2366 Can somebody with hardware that exhibits this problem apply the following 1-liner patch to the latest tree and send me your dmesg and /proc/interrupts, or attach it to the bug report? (sorry for the wrap, attachment is non-wrapped). ===== drivers/acpi/bus.c 1.40 vs edited ===== --- 1.40/drivers/acpi/bus.c Tue Mar 23 01:32:11 2004 +++ edited/drivers/acpi/bus.c Thu Mar 25 23:50:41 2004 @@ -623,7 +623,8 @@ * now that acpi_fadt is initialized, * update it with result from INT_SRC_OVR parsing */ - acpi_fadt.sci_int = acpi_sci_override_gsi; + printk("acpi_fadt.sci_int %d acpi_sci_override_gsi %d\n", + acpi_fadt.sci_int, acpi_sci_override_gsi); } #endif In this example, this will claim IRQ9 for APIC INITIN 0-22 while traditionally we've called this IRQ22. This brings up the bigger question of what an IRQ or GSI is... in PIC mode they are wires on the PIC. In APIC mode you sort of aggregate all the IOAPICS into one linear list and call the GSI the logical INITIN number. So why do we call the timer interrupt IRQ0 in this mode when it is really connected to INTIN 2? If we're consistent with that then we should call the SCI IRQ9 instead of IRQ22... In MSI mode, the GSI is the vector number on the CPU, unless it is for one of the legacy IRQs, in which case /proc/interrupts shows the PIC IRQ#. confusing. -Len [-- Attachment #2: bus.patch --] [-- Type: text/plain, Size: 443 bytes --] ===== drivers/acpi/bus.c 1.40 vs edited ===== --- 1.40/drivers/acpi/bus.c Tue Mar 23 01:32:11 2004 +++ edited/drivers/acpi/bus.c Thu Mar 25 23:50:41 2004 @@ -623,7 +623,8 @@ * now that acpi_fadt is initialized, * update it with result from INT_SRC_OVR parsing */ - acpi_fadt.sci_int = acpi_sci_override_gsi; + printk("acpi_fadt.sci_int %d acpi_sci_override_gsi %d\n", + acpi_fadt.sci_int, acpi_sci_override_gsi); } #endif ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken @ 2004-03-26 5:26 ` Len Brown 0 siblings, 0 replies; 16+ messages in thread From: Len Brown @ 2004-03-26 5:26 UTC (permalink / raw) To: Marc-Christian Petersen, Marcel Holtmann Cc: lkml, Andrew Morton, Linus Torvalds, Rik van Ballegooijen, ACPI Developers [-- Attachment #1: Type: text/plain, Size: 1677 bytes --] > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level) > > > ACPI: SCI (IRQ22) allocation failed > > ACPI-0133: *** Error: Unable to install System Control Interrupt > Handler, AE_NOT_ACQUIRED > > ACPI: Unable to start the ACPI Interpreter > working this issue here: > http://bugzilla.kernel.org/show_bug.cgi?id=2366 Can somebody with hardware that exhibits this problem apply the following 1-liner patch to the latest tree and send me your dmesg and /proc/interrupts, or attach it to the bug report? (sorry for the wrap, attachment is non-wrapped). ===== drivers/acpi/bus.c 1.40 vs edited ===== --- 1.40/drivers/acpi/bus.c Tue Mar 23 01:32:11 2004 +++ edited/drivers/acpi/bus.c Thu Mar 25 23:50:41 2004 @@ -623,7 +623,8 @@ * now that acpi_fadt is initialized, * update it with result from INT_SRC_OVR parsing */ - acpi_fadt.sci_int = acpi_sci_override_gsi; + printk("acpi_fadt.sci_int %d acpi_sci_override_gsi %d\n", + acpi_fadt.sci_int, acpi_sci_override_gsi); } #endif In this example, this will claim IRQ9 for APIC INITIN 0-22 while traditionally we've called this IRQ22. This brings up the bigger question of what an IRQ or GSI is... in PIC mode they are wires on the PIC. In APIC mode you sort of aggregate all the IOAPICS into one linear list and call the GSI the logical INITIN number. So why do we call the timer interrupt IRQ0 in this mode when it is really connected to INTIN 2? If we're consistent with that then we should call the SCI IRQ9 instead of IRQ22... In MSI mode, the GSI is the vector number on the CPU, unless it is for one of the legacy IRQs, in which case /proc/interrupts shows the PIC IRQ#. confusing. -Len [-- Attachment #2: bus.patch --] [-- Type: text/plain, Size: 443 bytes --] ===== drivers/acpi/bus.c 1.40 vs edited ===== --- 1.40/drivers/acpi/bus.c Tue Mar 23 01:32:11 2004 +++ edited/drivers/acpi/bus.c Thu Mar 25 23:50:41 2004 @@ -623,7 +623,8 @@ * now that acpi_fadt is initialized, * update it with result from INT_SRC_OVR parsing */ - acpi_fadt.sci_int = acpi_sci_override_gsi; + printk("acpi_fadt.sci_int %d acpi_sci_override_gsi %d\n", + acpi_fadt.sci_int, acpi_sci_override_gsi); } #endif ^ permalink raw reply [flat|nested] 16+ messages in thread
[parent not found: <1080278805.755.157.camel-D2Zvc0uNKG8@public.gmane.org>]
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken [not found] ` <1080278805.755.157.camel-D2Zvc0uNKG8@public.gmane.org> @ 2004-03-26 7:03 ` Trond Myklebust [not found] ` <1080284583.2439.8.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org> 2004-03-27 0:20 ` Len Brown 1 sibling, 1 reply; 16+ messages in thread From: Trond Myklebust @ 2004-03-26 7:03 UTC (permalink / raw) To: Len Brown; +Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f [-- Attachment #1: Type: text/plain, Size: 1353 bytes --] På fr , 26/03/2004 klokka 00:26, skreiv Len Brown: > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level) > > > > > ACPI: SCI (IRQ22) allocation failed > > > ACPI-0133: *** Error: Unable to install System Control Interrupt > > Handler, AE_NOT_ACQUIRED > > > ACPI: Unable to start the ACPI Interpreter > > > working this issue here: > > http://bugzilla.kernel.org/show_bug.cgi?id=2366 > > Can somebody with hardware that exhibits this problem > apply the following 1-liner patch to the latest tree > and send me your dmesg and /proc/interrupts, > or attach it to the bug report? > (sorry for the wrap, attachment is non-wrapped). Not sure if this is the exact same problem, but it appears to be uniprocessor IOAPIC related, I am running with MSI (although disabling MSI does not suffice to fix problem), and all was working well with a bitkeeper release from Monday night... Note these things in particular: - The worst case shows a bunch of never-seen-before "PCI BIOS passed nonexistent PCI bus X" crap. - Worst case also screws up network card interrupt - "Better" case (i.e. "noapic" boot) although networking card works, still shows broken ATIIXP sound card interrupt + previously unseen "__report_bad_irq" case. Cheers, Trond [-- Attachment #2: bad_gnurr.txt --] [-- Type: text/plain, Size: 20861 bytes --] Mar 26 01:28:29 lade kernel: Linux version 2.6.5-rc2 (trondmy@lade.trondhjem.org) (gcc version 3.3.3 (Debian 20040321)) #3 Fri Mar 26 00:58:56 EST 2004 Mar 26 01:28:29 lade kernel: BIOS-provided physical RAM map: Mar 26 01:28:29 lade kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Mar 26 01:28:29 lade kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Mar 26 01:28:29 lade kernel: BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) Mar 26 01:28:29 lade kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Mar 26 01:28:29 lade kernel: BIOS-e820: 0000000000100000 - 000000004ff70000 (usable) Mar 26 01:28:29 lade kernel: BIOS-e820: 000000004ff70000 - 000000004ff7d000 (ACPI data) Mar 26 01:28:29 lade kernel: BIOS-e820: 000000004ff7d000 - 000000004ff80000 (ACPI NVS) Mar 26 01:28:29 lade kernel: BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved) Mar 26 01:28:29 lade kernel: BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved) Mar 26 01:28:29 lade kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Mar 26 01:28:29 lade kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Mar 26 01:28:29 lade kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Mar 26 01:28:29 lade kernel: 383MB HIGHMEM available. Mar 26 01:28:29 lade kernel: 896MB LOWMEM available. Mar 26 01:28:29 lade kernel: found SMP MP-table at 000f6620 Mar 26 01:28:29 lade kernel: On node 0 totalpages: 327536 Mar 26 01:28:29 lade kernel: DMA zone: 4096 pages, LIFO batch:1 Mar 26 01:28:29 lade kernel: Normal zone: 225280 pages, LIFO batch:16 Mar 26 01:28:29 lade kernel: HighMem zone: 98160 pages, LIFO batch:16 Mar 26 01:28:29 lade kernel: DMI present. Mar 26 01:28:29 lade kernel: ACPI: RSDP (v000 PTLTD) @ 0x000f66b0 Mar 26 01:28:29 lade kernel: ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x4ff79195 Mar 26 01:28:29 lade kernel: ACPI: FADT (v001 HP Chinook 0x06040000 ATI 0x000f4240) @ 0x4ff7ce7d Mar 26 01:28:29 lade kernel: ACPI: SSDT (v001 PTLTD ACPIPST1 0x06040000 LTP 0x00000001) @ 0x4ff7cef1 Mar 26 01:28:29 lade kernel: ACPI: MADT (v001 PTLTD ^I APIC 0x06040000 LTP 0x00000000) @ 0x4ff7cfa6 Mar 26 01:28:29 lade kernel: ACPI: DSDT (v001 HP SB200 0x06040000 INTL 0x20030509) @ 0x00000000 Mar 26 01:28:29 lade kernel: ACPI: PM-Timer IO Port: 0x8008 Mar 26 01:28:29 lade kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Mar 26 01:28:29 lade kernel: Processor #0 15:2 APIC version 20 Mar 26 01:28:29 lade kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])Mar 26 01:28:29 lade kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] global_irq_base[0x0]) Mar 26 01:28:29 lade kernel: IOAPIC[0]: Assigned apic_id 1 Mar 26 01:28:29 lade kernel: IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 Mar 26 01:28:29 lade kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Mar 26 01:28:29 lade kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) Mar 26 01:28:29 lade kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Mar 26 01:28:29 lade kernel: Using ACPI (MADT) for SMP configuration informationMar 26 01:28:29 lade kernel: Built 1 zonelists Mar 26 01:28:29 lade kernel: Kernel command line: auto BOOT_IMAGE=Linux-2.6 ro root=305 Mar 26 01:28:29 lade kernel: Initializing CPU#0 Mar 26 01:28:29 lade kernel: PID hash table entries: 4096 (order 12: 32768 bytes) Mar 26 01:28:29 lade kernel: Detected 3067.743 MHz processor. Mar 26 01:28:29 lade kernel: Using pmtmr for high-res timesource Mar 26 01:28:29 lade kernel: Console: colour VGA+ 80x25 Mar 26 01:28:29 lade kernel: Memory: 1292888k/1310144k available (1870k kernel code, 16136k reserved, 866k data, 160k init, 392640k highmem) Mar 26 01:28:29 lade kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Mar 26 01:28:29 lade kernel: Calibrating delay loop... 6094.84 BogoMIPS Mar 26 01:28:29 lade kernel: Security Scaffold v1.0.0 initialized Mar 26 01:28:29 lade kernel: Capability LSM initialized Mar 26 01:28:29 lade kernel: Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Mar 26 01:28:29 lade kernel: Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Mar 26 01:28:29 lade kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Mar 26 01:28:29 lade kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K Mar 26 01:28:29 lade kernel: CPU: L2 cache: 512K Mar 26 01:28:29 lade kernel: Intel machine check architecture supported. Mar 26 01:28:29 lade kernel: Intel machine check reporting enabled on CPU#0. Mar 26 01:28:29 lade kernel: CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available Mar 26 01:28:29 lade kernel: CPU: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 Mar 26 01:28:29 lade kernel: Enabling fast FPU save and restore... done. Mar 26 01:28:29 lade kernel: Enabling unmasked SIMD FPU exception support... done. Mar 26 01:28:29 lade kernel: Checking 'hlt' instruction... OK. Mar 26 01:28:29 lade kernel: POSIX conformance testing by UNIFIX Mar 26 01:28:29 lade kernel: enabled ExtINT on CPU#0 Mar 26 01:28:29 lade kernel: ESR value before enabling vector: 00000000 Mar 26 01:28:29 lade kernel: ESR value after enabling vector: 00000000 Mar 26 01:28:29 lade kernel: ENABLING IO-APIC IRQs Mar 26 01:28:29 lade kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1 Mar 26 01:28:29 lade kernel: Using local APIC timer interrupts. Mar 26 01:28:29 lade kernel: calibrating APIC timer ... Mar 26 01:28:29 lade kernel: ..... CPU clock speed is 3066.0287 MHz. Mar 26 01:28:29 lade kernel: ..... host bus clock speed is 133.0316 MHz. Mar 26 01:28:29 lade kernel: NET: Registered protocol family 16 Mar 26 01:28:29 lade kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2 Mar 26 01:28:29 lade kernel: PCI: Using configuration type 1 Mar 26 01:28:29 lade kernel: mtrr: v2.0 (20020519) Mar 26 01:28:29 lade kernel: ACPI: Subsystem revision 20040311 Mar 26 01:28:29 lade kernel: tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Mar 26 01:28:29 lade kernel: Parsing all Control Methods:...................................................................................................................... Mar 26 01:28:29 lade kernel: Table [DSDT](id F005) - 499 Objects with 47 Devices 118 Methods 22 Regions Mar 26 01:28:29 lade kernel: Parsing all Control Methods: Mar 26 01:28:29 lade kernel: Table [SSDT](id F003) - 3 Objects with 0 Devices 0 Methods 0 Regions Mar 26 01:28:29 lade kernel: ACPI Namespace successfully loaded at root c03fbc3cMar 26 01:28:29 lade kernel: acpi_fadt.sci_int 21 acpi_sci_override_gsi 21 Mar 26 01:28:29 lade kernel: evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful Mar 26 01:28:29 lade kernel: evgpeblk-0747 [06] ev_create_gpe_block : GPE 00 to 31 [_GPE] 4 regs at 0000000000008020 on int 9 Mar 26 01:28:29 lade kernel: evevent-0133: *** Error: Unable to install System Control Interrupt Handler, AE_NOT_ACQUIRED Mar 26 01:28:29 lade kernel: evxfevnt-0139 [06] acpi_disable : ACPI mode disabled Mar 26 01:28:29 lade kernel: utalloc-0945 [05] ut_dump_allocations : No outstanding allocations. Mar 26 01:28:29 lade kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Mar 26 01:28:29 lade kernel: ACPI: ACPI tables contain no PCI IRQ routing entries Mar 26 01:28:29 lade kernel: PCI: Invalid ACPI-PCI IRQ routing table Mar 26 01:28:29 lade kernel: PCI: Probing PCI hardware Mar 26 01:28:29 lade kernel: PCI: Probing PCI hardware (bus 00) Mar 26 01:28:29 lade kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1Mar 26 01:28:29 lade kernel: Transparent bridge - 0000:00:14.4 Mar 26 01:28:29 lade kernel: PCI: Using IRQ router default [1002/434c] at 0000:00:14.3 Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 0! Mar 26 01:28:29 lade last message repeated 4 times Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 1! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 0! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 2! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 0! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 2! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 0! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 2! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 0! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 2! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 0! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 2! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 0! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 2! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 0! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 2! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 0! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 2! Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 0! Mar 26 01:28:29 lade kernel: Machine check exception polling timer started. Mar 26 01:28:29 lade kernel: Total HugeTLB memory allocated, 0 Mar 26 01:28:29 lade kernel: ikconfig 0.7 with /proc/config* Mar 26 01:28:29 lade kernel: highmem bounce pool size: 64 pages Mar 26 01:28:29 lade kernel: Initializing Cryptographic API Mar 26 01:28:29 lade kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Mar 26 01:28:29 lade kernel: isapnp: Scanning for PnP cards... Mar 26 01:28:29 lade kernel: isapnp: No Plug & Play device found Mar 26 01:28:29 lade kernel: Real Time Clock Driver v1.12 Mar 26 01:28:29 lade kernel: Using anticipatory io scheduler Mar 26 01:28:29 lade kernel: floppy0: no floppy controllers found Mar 26 01:28:29 lade kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Mar 26 01:28:29 lade kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Mar 26 01:28:29 lade kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Mar 26 01:28:29 lade kernel: ATIIXP: IDE controller at PCI slot 0000:00:14.1 Mar 26 01:28:29 lade kernel: PCI BIOS passed nonexistent PCI bus 0! Mar 26 01:28:29 lade kernel: ATIIXP: chipset revision 0 Mar 26 01:28:29 lade kernel: ATIIXP: not 100%% native mode: will probe irqs later Mar 26 01:28:29 lade kernel: ide0: BM-DMA at 0x8060-0x8067, BIOS settings: hda:DMA, hdb:pio Mar 26 01:28:29 lade kernel: ide1: BM-DMA at 0x8068-0x806f, BIOS settings: hdc:DMA, hdd:pio Mar 26 01:28:29 lade kernel: hda: TOSHIBA MK8025GAS, ATA DISK drive Mar 26 01:28:29 lade kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Mar 26 01:28:29 lade kernel: hdc: SD-R6252, ATAPI CD/DVD-ROM drive Mar 26 01:28:29 lade kernel: ide1 at 0x170-0x177,0x376 on irq 15 Mar 26 01:28:29 lade kernel: hda: max request size: 128KiB Mar 26 01:28:29 lade kernel: hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) Mar 26 01:28:29 lade kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > Mar 26 01:28:29 lade kernel: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA Mar 26 01:28:29 lade kernel: Uniform CD-ROM driver Revision: 3.20 Mar 26 01:28:29 lade kernel: mice: PS/2 mouse device common for all mice Mar 26 01:28:29 lade kernel: i8042.c: Detected active multiplexing controller, rev 1.1. Mar 26 01:28:29 lade kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12 Mar 26 01:28:29 lade kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12 Mar 26 01:28:29 lade kernel: atkbd.c: Unknown key pressed (raw set 0, code 0x17e on isa0060/serio2). Mar 26 01:28:29 lade kernel: atkbd.c: Use 'setkeycodes 7e <keycode>' to make it known. Mar 26 01:28:29 lade kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12 Mar 26 01:28:29 lade kernel: atkbd.c: Unknown key pressed (raw set 0, code 0x17e on isa0060/serio3). Mar 26 01:28:29 lade kernel: atkbd.c: Use 'setkeycodes 7e <keycode>' to make it known. Mar 26 01:28:29 lade kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12 Mar 26 01:28:29 lade kernel: input: PS/2 Generic Mouse on isa0060/serio4 Mar 26 01:28:29 lade kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Mar 26 01:28:29 lade kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Mar 26 01:28:29 lade kernel: NET: Registered protocol family 2 Mar 26 01:28:29 lade kernel: IP: routing cache hash table of 16384 buckets, 128Kbytes Mar 26 01:28:29 lade kernel: TCP: Hash tables configured (established 524288 bind 65536) Mar 26 01:28:29 lade kernel: Initializing IPsec netlink socket Mar 26 01:28:29 lade kernel: NET: Registered protocol family 1 Mar 26 01:28:29 lade kernel: NET: Registered protocol family 17 Mar 26 01:28:29 lade kernel: NET: Registered protocol family 15 Mar 26 01:28:29 lade kernel: BIOS EDD facility v0.13 2004-Mar-09, 1 devices found Mar 26 01:28:29 lade kernel: Please report your BIOS at http://linux.dell.com/edd/results.html Mar 26 01:28:29 lade kernel: kjournald starting. Commit interval 5 seconds Mar 26 01:28:29 lade kernel: EXT3-fs: mounted filesystem with ordered data mode.Mar 26 01:28:29 lade kernel: VFS: Mounted root (ext3 filesystem) readonly. Mar 26 01:28:29 lade kernel: Freeing unused kernel memory: 160k freed Mar 26 01:28:29 lade kernel: blk: queue f7d16290, I/O limit 4095Mb (mask 0xffffffff) Mar 26 01:28:29 lade kernel: Adding 2008084k swap on /dev/hda6. Priority:-1 extents:1 Mar 26 01:28:29 lade kernel: EXT3 FS on hda5, internal journal Mar 26 01:28:29 lade kernel: drivers/usb/core/usb.c: registered new driver usbfsMar 26 01:28:29 lade kernel: drivers/usb/core/usb.c: registered new driver hub Mar 26 01:28:29 lade kernel: ehci_hcd 0000:02:07.2: NEC Corporation USB 2.0 Mar 26 01:28:29 lade kernel: ehci_hcd 0000:02:07.2: irq 11, pci mem f8929c00 Mar 26 01:28:29 lade kernel: ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1 Mar 26 01:28:29 lade kernel: ehci_hcd 0000:02:07.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 Mar 26 01:28:29 lade kernel: hub 1-0:1.0: USB hub found Mar 26 01:28:29 lade kernel: hub 1-0:1.0: 5 ports detected Mar 26 01:28:29 lade kernel: Linux agpgart interface v0.100 (c) Dave Jones Mar 26 01:28:29 lade kernel: agpgart: Detected Ati IGP9100/M chipset Mar 26 01:28:29 lade kernel: agpgart: Maximum main memory to use for agp memory: 1185M Mar 26 01:28:29 lade kernel: agpgart: AGP aperture is 32M @ 0xea000000 Mar 26 01:28:29 lade kernel: radeonfb: Retreived PLL infos from BIOS Mar 26 01:28:29 lade kernel: radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=215.00 Mhz, System=220.00 MHz Mar 26 01:28:29 lade kernel: Non-DDC laptop panel detected Mar 26 01:28:29 lade kernel: radeonfb: Monitor 1 type LCD found Mar 26 01:28:29 lade kernel: radeonfb: Monitor 2 type no found Mar 26 01:28:29 lade kernel: radeonfb: panel ID string: SEC Mar 26 01:28:29 lade kernel: radeonfb: detected LVDS panel size from BIOS: 1680x1050 Mar 26 01:28:29 lade kernel: radeondb: BIOS provided dividers will be used Mar 26 01:28:29 lade kernel: radeonfb: Power Management enabled for Mobility chipsets Mar 26 01:28:29 lade kernel: radeonfb: ATI Radeon \a DDR SGRAM 64 MB Mar 26 01:28:29 lade kernel: Console: switching to colour frame buffer device 210x65 Mar 26 01:28:29 lade kernel: Non-volatile memory driver v1.2 Mar 26 01:28:29 lade kernel: kjournald starting. Commit interval 5 seconds Mar 26 01:28:29 lade kernel: EXT3 FS on hda1, internal journal Mar 26 01:28:29 lade kernel: EXT3-fs: mounted filesystem with ordered data mode.Mar 26 01:28:29 lade kernel: kjournald starting. Commit interval 5 seconds Mar 26 01:28:29 lade kernel: EXT3 FS on hda10, internal journal Mar 26 01:28:29 lade kernel: EXT3-fs: mounted filesystem with ordered data mode.Mar 26 01:28:29 lade kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Mar 26 01:28:29 lade kernel: ts: Compaq touchscreen protocol output Mar 26 01:28:29 lade kernel: ohci_hcd 0000:00:13.0: PCI device 1002:4347 (ATI Technologies Inc) Mar 26 01:28:29 lade kernel: ohci_hcd 0000:00:13.0: irq 11, pci mem f8960000 Mar 26 01:28:29 lade kernel: ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 Mar 26 01:28:29 lade kernel: hub 2-0:1.0: USB hub found Mar 26 01:28:29 lade kernel: hub 2-0:1.0: 3 ports detected Mar 26 01:28:29 lade kernel: ohci_hcd 0000:00:13.1: PCI device 1002:4348 (ATI Technologies Inc) Mar 26 01:28:29 lade kernel: ohci_hcd 0000:00:13.1: irq 11, pci mem f89a2000 Mar 26 01:28:29 lade kernel: ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 Mar 26 01:28:29 lade kernel: hub 3-0:1.0: USB hub found Mar 26 01:28:29 lade kernel: hub 3-0:1.0: 3 ports detected Mar 26 01:28:29 lade kernel: ohci_hcd 0000:02:07.0: NEC Corporation USB Mar 26 01:28:29 lade kernel: ohci_hcd 0000:02:07.0: irq 10, pci mem f89ee000 Mar 26 01:28:29 lade kernel: ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4 Mar 26 01:28:29 lade kernel: hub 4-0:1.0: USB hub found Mar 26 01:28:29 lade kernel: hub 4-0:1.0: 3 ports detected Mar 26 01:28:29 lade kernel: ohci_hcd 0000:02:07.1: NEC Corporation USB (#2) Mar 26 01:28:29 lade kernel: ohci_hcd 0000:02:07.1: irq 5, pci mem f89f0000 Mar 26 01:28:29 lade kernel: ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5 Mar 26 01:28:29 lade kernel: hub 5-0:1.0: USB hub found Mar 26 01:28:29 lade kernel: hub 5-0:1.0: 2 ports detected Mar 26 01:28:29 lade kernel: atiixp: codec read timeout Mar 26 01:28:30 lade last message repeated 239 times Mar 26 01:28:30 lade kernel: AC'97 2 does not respond - RESET Mar 26 01:28:30 lade kernel: atiixp: codec read timeout Mar 26 01:28:30 lade kernel: atiixp: codec read timeout Mar 26 01:28:30 lade kernel: ATI IXP AC97 controller: probe of 0000:00:14.5 failed with error -5 Mar 26 01:28:30 lade kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled Mar 26 01:28:30 lade kernel: ohci1394: $Rev: 1172 $ Ben Collins <bcollins@debian.org> Mar 26 01:28:30 lade kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e8208000-e82087ff] Max Packet=[2048] Mar 26 01:28:30 lade kernel: 8139too Fast Ethernet driver 0.9.27 Mar 26 01:28:30 lade kernel: eth0: RealTek RTL8139 at 0xf9a52800, 00:02:3f:69:be:4f, IRQ 11 Mar 26 01:28:30 lade kernel: Linux Kernel Card Services Mar 26 01:28:30 lade kernel: options: [pci] [cardbus] [pm] Mar 26 01:28:30 lade kernel: Yenta: CardBus bridge found at 0000:02:04.0 [103c:006b] Mar 26 01:28:30 lade kernel: Yenta: ISA IRQ mask 0x00d8, PCI irq 10 Mar 26 01:28:30 lade kernel: Socket status: 30000006 Mar 26 01:28:30 lade kernel: Yenta: CardBus bridge found at 0000:02:04.1 [103c:006b] Mar 26 01:28:30 lade kernel: Yenta: ISA IRQ mask 0x00d8, PCI irq 10 Mar 26 01:28:30 lade kernel: Socket status: 30000006 Mar 26 01:28:34 lade kernel: NET: Registered protocol family 10 Mar 26 01:28:34 lade kernel: Disabled Privacy Extensions on device c0374de0(lo) Mar 26 01:28:34 lade kernel: IPv6 over IPv4 tunneling driver Mar 26 01:28:35 lade kernel: lp: driver loaded but no devices found Mar 26 01:28:37 lade kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7 Mar 26 01:28:37 lade kernel: cs: IO port probe 0x0800-0x08ff: clean. Mar 26 01:28:37 lade kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x20f 0x3c0-0x3df 0x408-0x40f 0x4d0-0x4d7 Mar 26 01:28:38 lade kernel: cs: IO port probe 0x0a00-0x0aff: clean. Mar 26 01:30:30 lade kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Mar 26 01:30:42 lade kernel: NETDEV WATCHDOG: eth0: transmit timed out Mar 26 01:30:42 lade kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Mar 26 01:30:54 lade kernel: NETDEV WATCHDOG: eth0: transmit timed out Mar 26 01:30:54 lade kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Mar 26 01:31:48 lade kernel: NETDEV WATCHDOG: eth0: transmit timed out Mar 26 01:31:48 lade kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 CPU0 0: 79282 IO-APIC-edge timer 1: 274 IO-APIC-edge i8042 2: 0 XT-PIC cascade 5: 1 IO-APIC-edge ohci_hcd 8: 4 IO-APIC-edge rtc 10: 0 IO-APIC-edge ohci_hcd, ohci1394, yenta, yenta, radeon@PCI:1:5:0 11: 2 IO-APIC-edge ehci_hcd, ohci_hcd, ohci_hcd, eth0 12: 65 IO-APIC-edge i8042 14: 4098 IO-APIC-edge ide0 15: 48 IO-APIC-edge ide1 NMI: 0 LOC: 79175 ERR: 0 MIS: 0 BOOT_IMAGE=Linux-2.6 ro root=305 [-- Attachment #3: better_gnurr.txt --] [-- Type: text/plain, Size: 22077 bytes --] Mar 26 01:36:40 lade syslogd 1.4.1#13: restart. Mar 26 01:36:40 lade kernel: klogd 1.4.1#13, log source = /proc/kmsg started. Mar 26 01:36:40 lade kernel: Inspecting /boot/System.map-2.6.5-rc2 Mar 26 01:36:40 lade kernel: Loaded 28506 symbols from /boot/System.map-2.6.5-rc2. Mar 26 01:36:40 lade kernel: Symbols match kernel version 2.6.5. Mar 26 01:36:40 lade kernel: No module symbols loaded - kernel modules not enabled. Mar 26 01:36:40 lade kernel: Linux version 2.6.5-rc2 (trondmy@lade.trondhjem.org) (gcc version 3.3.3 (Debian 20040321)) #3 Fri Mar 26 00:58:56 EST 2004 Mar 26 01:36:40 lade kernel: BIOS-provided physical RAM map: Mar 26 01:36:40 lade kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Mar 26 01:36:40 lade kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Mar 26 01:36:40 lade kernel: BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) Mar 26 01:36:40 lade kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Mar 26 01:36:40 lade kernel: BIOS-e820: 0000000000100000 - 000000004ff70000 (usable) Mar 26 01:36:40 lade kernel: BIOS-e820: 000000004ff70000 - 000000004ff7d000 (ACPI data) Mar 26 01:36:40 lade kernel: BIOS-e820: 000000004ff7d000 - 000000004ff80000 (ACPI NVS) Mar 26 01:36:40 lade kernel: BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved) Mar 26 01:36:40 lade kernel: BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved) Mar 26 01:36:40 lade kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Mar 26 01:36:40 lade kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Mar 26 01:36:40 lade kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Mar 26 01:36:40 lade kernel: 383MB HIGHMEM available. Mar 26 01:36:40 lade kernel: 896MB LOWMEM available. Mar 26 01:36:40 lade kernel: found SMP MP-table at 000f6620 Mar 26 01:36:40 lade kernel: On node 0 totalpages: 327536 Mar 26 01:36:40 lade kernel: DMA zone: 4096 pages, LIFO batch:1 Mar 26 01:36:40 lade kernel: Normal zone: 225280 pages, LIFO batch:16 Mar 26 01:36:40 lade kernel: HighMem zone: 98160 pages, LIFO batch:16 Mar 26 01:36:40 lade kernel: DMI present. Mar 26 01:36:40 lade kernel: ACPI: RSDP (v000 PTLTD) @ 0x000f66b0 Mar 26 01:36:40 lade kernel: ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x4ff79195 Mar 26 01:36:40 lade kernel: ACPI: FADT (v001 HP Chinook 0x06040000 ATI 0x000f4240) @ 0x4ff7ce7d Mar 26 01:36:40 lade kernel: ACPI: SSDT (v001 PTLTD ACPIPST1 0x06040000 LTP 0x00000001) @ 0x4ff7cef1 Mar 26 01:36:40 lade kernel: ACPI: MADT (v001 PTLTD ^I APIC 0x06040000 LTP 0x00000000) @ 0x4ff7cfa6 Mar 26 01:36:40 lade kernel: ACPI: DSDT (v001 HP SB200 0x06040000 INTL 0x20030509) @ 0x00000000 Mar 26 01:36:40 lade kernel: ACPI: PM-Timer IO Port: 0x8008 Mar 26 01:36:40 lade kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Mar 26 01:36:40 lade kernel: Processor #0 15:2 APIC version 20 Mar 26 01:36:40 lade kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])Mar 26 01:36:40 lade kernel: ACPI: Skipping IOAPIC probe due to 'noapic' option.Mar 26 01:36:40 lade kernel: Using ACPI for processor (LAPIC) configuration information Mar 26 01:36:40 lade kernel: Intel MultiProcessor Specification v1.4 Mar 26 01:36:40 lade kernel: Virtual Wire compatibility mode. Mar 26 01:36:40 lade kernel: OEM ID: Product ID: RS300 Board APIC at: 0xFEE00000 Mar 26 01:36:40 lade kernel: I/O APIC #1 Version 17 at 0xFEC00000. Mar 26 01:36:40 lade kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Mar 26 01:36:40 lade kernel: Processors: 1 Mar 26 01:36:40 lade kernel: Built 1 zonelists Mar 26 01:36:41 lade kernel: Kernel command line: BOOT_IMAGE=Linux-2.6 ro root=305 noapic Mar 26 01:36:41 lade kernel: Initializing CPU#0 Mar 26 01:36:41 lade kernel: PID hash table entries: 4096 (order 12: 32768 bytes) Mar 26 01:36:41 lade kernel: Detected 3067.018 MHz processor. Mar 26 01:36:41 lade kernel: Using pmtmr for high-res timesource Mar 26 01:36:41 lade kernel: Console: colour VGA+ 80x25 Mar 26 01:36:41 lade kernel: Memory: 1292888k/1310144k available (1870k kernel code, 16136k reserved, 866k data, 160k init, 392640k highmem) Mar 26 01:36:41 lade kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Mar 26 01:36:41 lade kernel: Calibrating delay loop... 6094.84 BogoMIPS Mar 26 01:36:41 lade kernel: Security Scaffold v1.0.0 initialized Mar 26 01:36:41 lade kernel: Capability LSM initialized Mar 26 01:36:41 lade kernel: Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Mar 26 01:36:41 lade kernel: Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Mar 26 01:36:41 lade kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Mar 26 01:36:41 lade kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K Mar 26 01:36:41 lade kernel: CPU: L2 cache: 512K Mar 26 01:36:41 lade kernel: Intel machine check architecture supported. Mar 26 01:36:41 lade kernel: Intel machine check reporting enabled on CPU#0. Mar 26 01:36:41 lade kernel: CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available Mar 26 01:36:41 lade kernel: CPU: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 Mar 26 01:36:41 lade kernel: Enabling fast FPU save and restore... done. Mar 26 01:36:41 lade kernel: Enabling unmasked SIMD FPU exception support... done. Mar 26 01:36:41 lade kernel: Checking 'hlt' instruction... OK. Mar 26 01:36:41 lade kernel: POSIX conformance testing by UNIFIX Mar 26 01:36:41 lade kernel: enabled ExtINT on CPU#0 Mar 26 01:36:41 lade kernel: ESR value before enabling vector: 00000000 Mar 26 01:36:41 lade kernel: ESR value after enabling vector: 00000000 Mar 26 01:36:41 lade kernel: Using local APIC timer interrupts. Mar 26 01:36:41 lade kernel: calibrating APIC timer ... Mar 26 01:36:41 lade kernel: ..... CPU clock speed is 3066.0434 MHz. Mar 26 01:36:41 lade kernel: ..... host bus clock speed is 133.0323 MHz. Mar 26 01:36:41 lade kernel: NET: Registered protocol family 16 Mar 26 01:36:41 lade kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2 Mar 26 01:36:41 lade kernel: PCI: Using configuration type 1 Mar 26 01:36:41 lade kernel: mtrr: v2.0 (20020519) Mar 26 01:36:41 lade kernel: ACPI: Subsystem revision 20040311 Mar 26 01:36:41 lade kernel: tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Mar 26 01:36:41 lade kernel: Parsing all Control Methods:...................................................................................................................... Mar 26 01:36:41 lade kernel: Table [DSDT](id F005) - 499 Objects with 47 Devices 118 Methods 22 Regions Mar 26 01:36:41 lade kernel: Parsing all Control Methods: Mar 26 01:36:41 lade kernel: Table [SSDT](id F003) - 3 Objects with 0 Devices 0 Methods 0 Regions Mar 26 01:36:41 lade kernel: ACPI Namespace successfully loaded at root c03fbc3cMar 26 01:36:41 lade kernel: ACPI: IRQ9 SCI: Edge Trigger. Mar 26 01:36:41 lade kernel: evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful Mar 26 01:36:41 lade kernel: evgpeblk-0747 [06] ev_create_gpe_block : GPE 00 to 31 [_GPE] 4 regs at 0000000000008020 on int 9 Mar 26 01:36:41 lade kernel: Completing Region/Field/Buffer/Package initialization:................................................................. Mar 26 01:36:41 lade kernel: Initialized 22/22 Regions 1/1 Fields 22/22 Buffers 20/20 Packages (511 nodes) Mar 26 01:36:41 lade kernel: Executing all Device _STA and_INI methods:................................................. Mar 26 01:36:41 lade kernel: 49 Devices found containing: 49 _STA, 1 _INI methods Mar 26 01:36:41 lade kernel: ACPI: Interpreter enabled Mar 26 01:36:41 lade kernel: ACPI: Using PIC for interrupt routing Mar 26 01:36:41 lade kernel: nsxfeval-0241 [07] acpi_evaluate_object : Handle is NULL and Pathname is relative Mar 26 01:36:41 lade last message repeated 3 times Mar 26 01:36:41 lade kernel: ACPI: PCI Root Bridge [PCI0] (00:00) Mar 26 01:36:41 lade kernel: PCI: Probing PCI hardware (bus 00) Mar 26 01:36:41 lade kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1Mar 26 01:36:41 lade kernel: Transparent bridge - 0000:00:14.4 Mar 26 01:36:41 lade kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 5 *10 11) Mar 26 01:36:41 lade kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 5 *10 11) Mar 26 01:36:41 lade kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs *5 10 11) Mar 26 01:36:41 lade kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 *11) Mar 26 01:36:41 lade kernel: ACPI: Embedded Controller [EC0] (gpe 6) Mar 26 01:36:41 lade kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Mar 26 01:36:41 lade kernel: ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11 Mar 26 01:36:41 lade kernel: ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10 Mar 26 01:36:41 lade kernel: ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10 Mar 26 01:36:41 lade kernel: ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5 Mar 26 01:36:41 lade kernel: PCI: Using ACPI for IRQ routing Mar 26 01:36:41 lade kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Mar 26 01:36:41 lade kernel: Machine check exception polling timer started. Mar 26 01:36:41 lade kernel: Total HugeTLB memory allocated, 0 Mar 26 01:36:41 lade kernel: ikconfig 0.7 with /proc/config* Mar 26 01:36:41 lade kernel: highmem bounce pool size: 64 pages Mar 26 01:36:41 lade kernel: Initializing Cryptographic API Mar 26 01:36:41 lade kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Mar 26 01:36:41 lade kernel: ACPI: AC Adapter [ACAD] (on-line) Mar 26 01:36:41 lade kernel: ACPI: Battery Slot [BAT1] (battery present) Mar 26 01:36:41 lade kernel: ACPI: Power Button (FF) [PWRF] Mar 26 01:36:41 lade kernel: ACPI: Lid Switch [LID] Mar 26 01:36:41 lade kernel: ACPI: Processor [CPU0] (supports C1 C2) Mar 26 01:36:41 lade kernel: ACPI: Thermal Zone [THRM] (58 C) Mar 26 01:36:41 lade kernel: isapnp: Scanning for PnP cards... Mar 26 01:36:41 lade kernel: isapnp: No Plug & Play device found Mar 26 01:36:41 lade kernel: Real Time Clock Driver v1.12 Mar 26 01:36:41 lade kernel: Using anticipatory io scheduler Mar 26 01:36:41 lade kernel: floppy0: no floppy controllers found Mar 26 01:36:41 lade kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Mar 26 01:36:41 lade kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Mar 26 01:36:41 lade kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Mar 26 01:36:41 lade kernel: ATIIXP: IDE controller at PCI slot 0000:00:14.1 Mar 26 01:36:41 lade kernel: ATIIXP: chipset revision 0 Mar 26 01:36:41 lade kernel: ATIIXP: not 100%% native mode: will probe irqs later Mar 26 01:36:41 lade kernel: ide0: BM-DMA at 0x8060-0x8067, BIOS settings: hda:DMA, hdb:pio Mar 26 01:36:41 lade kernel: ide1: BM-DMA at 0x8068-0x806f, BIOS settings: hdc:DMA, hdd:pio Mar 26 01:36:41 lade kernel: hda: TOSHIBA MK8025GAS, ATA DISK drive Mar 26 01:36:41 lade kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Mar 26 01:36:41 lade kernel: hdc: SD-R6252, ATAPI CD/DVD-ROM drive Mar 26 01:36:41 lade kernel: ide1 at 0x170-0x177,0x376 on irq 15 Mar 26 01:36:41 lade kernel: hda: max request size: 128KiB Mar 26 01:36:41 lade kernel: hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) Mar 26 01:36:41 lade kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > Mar 26 01:36:41 lade kernel: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA Mar 26 01:36:41 lade kernel: Uniform CD-ROM driver Revision: 3.20 Mar 26 01:36:41 lade kernel: mice: PS/2 mouse device common for all mice Mar 26 01:36:41 lade kernel: i8042.c: Detected active multiplexing controller, rev 1.1. Mar 26 01:36:41 lade kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12 Mar 26 01:36:41 lade kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12 Mar 26 01:36:41 lade kernel: atkbd.c: Unknown key pressed (raw set 0, code 0x17e on isa0060/serio2). Mar 26 01:36:41 lade kernel: atkbd.c: Use 'setkeycodes 7e <keycode>' to make it known. Mar 26 01:36:41 lade kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12 Mar 26 01:36:41 lade kernel: atkbd.c: Unknown key pressed (raw set 0, code 0x17e on isa0060/serio3). Mar 26 01:36:41 lade kernel: atkbd.c: Use 'setkeycodes 7e <keycode>' to make it known. Mar 26 01:36:41 lade kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12 Mar 26 01:36:41 lade kernel: input: PS/2 Generic Mouse on isa0060/serio4 Mar 26 01:36:41 lade kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Mar 26 01:36:41 lade kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Mar 26 01:36:41 lade kernel: NET: Registered protocol family 2 Mar 26 01:36:41 lade kernel: IP: routing cache hash table of 16384 buckets, 128Kbytes Mar 26 01:36:41 lade kernel: TCP: Hash tables configured (established 524288 bind 65536) Mar 26 01:36:41 lade kernel: Initializing IPsec netlink socket Mar 26 01:36:41 lade kernel: NET: Registered protocol family 1 Mar 26 01:36:41 lade kernel: NET: Registered protocol family 17 Mar 26 01:36:41 lade kernel: NET: Registered protocol family 15 Mar 26 01:36:41 lade kernel: BIOS EDD facility v0.13 2004-Mar-09, 1 devices found Mar 26 01:36:41 lade kernel: Please report your BIOS at http://linux.dell.com/edd/results.html Mar 26 01:36:41 lade kernel: kjournald starting. Commit interval 5 seconds Mar 26 01:36:41 lade kernel: EXT3-fs: mounted filesystem with ordered data mode.Mar 26 01:36:41 lade kernel: VFS: Mounted root (ext3 filesystem) readonly. Mar 26 01:36:41 lade kernel: Freeing unused kernel memory: 160k freed Mar 26 01:36:41 lade kernel: blk: queue f7cc7ccc, I/O limit 4095Mb (mask 0xffffffff) Mar 26 01:36:41 lade kernel: Adding 2008084k swap on /dev/hda6. Priority:-1 extents:1 Mar 26 01:36:41 lade kernel: EXT3 FS on hda5, internal journal Mar 26 01:36:41 lade kernel: cpufreq: CPU0 - ACPI performance management activated. Mar 26 01:36:41 lade kernel: cpufreq: *P0: 3059 MHz, 0 mW, 250 uS Mar 26 01:36:41 lade kernel: cpufreq: P1: 1596 MHz, 0 mW, 250 uS Mar 26 01:36:41 lade kernel: drivers/usb/core/usb.c: registered new driver usbfsMar 26 01:36:41 lade kernel: drivers/usb/core/usb.c: registered new driver hub Mar 26 01:36:41 lade kernel: ehci_hcd 0000:02:07.2: NEC Corporation USB 2.0 Mar 26 01:36:41 lade kernel: ehci_hcd 0000:02:07.2: irq 11, pci mem f8938c00 Mar 26 01:36:41 lade kernel: ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1 Mar 26 01:36:41 lade kernel: ehci_hcd 0000:02:07.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 Mar 26 01:36:41 lade kernel: hub 1-0:1.0: USB hub found Mar 26 01:36:41 lade kernel: hub 1-0:1.0: 5 ports detected Mar 26 01:36:41 lade kernel: Linux agpgart interface v0.100 (c) Dave Jones Mar 26 01:36:41 lade kernel: agpgart: Detected Ati IGP9100/M chipset Mar 26 01:36:41 lade kernel: agpgart: Maximum main memory to use for agp memory: 1185M Mar 26 01:36:41 lade kernel: agpgart: AGP aperture is 32M @ 0xea000000 Mar 26 01:36:41 lade kernel: radeonfb: Retreived PLL infos from BIOS Mar 26 01:36:41 lade kernel: radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=215.00 Mhz, System=220.00 MHz Mar 26 01:36:41 lade kernel: Non-DDC laptop panel detected Mar 26 01:36:41 lade kernel: radeonfb: Monitor 1 type LCD found Mar 26 01:36:41 lade kernel: radeonfb: Monitor 2 type no found Mar 26 01:36:41 lade kernel: radeonfb: panel ID string: SEC Mar 26 01:36:41 lade kernel: radeonfb: detected LVDS panel size from BIOS: 1680x1050 Mar 26 01:36:41 lade kernel: radeondb: BIOS provided dividers will be used Mar 26 01:36:41 lade kernel: radeonfb: Power Management enabled for Mobility chipsets Mar 26 01:36:41 lade kernel: radeonfb: ATI Radeon \a DDR SGRAM 64 MB Mar 26 01:36:41 lade kernel: Console: switching to colour frame buffer device 210x65 Mar 26 01:36:41 lade kernel: Non-volatile memory driver v1.2 Mar 26 01:36:41 lade kernel: kjournald starting. Commit interval 5 seconds Mar 26 01:36:41 lade kernel: EXT3 FS on hda1, internal journal Mar 26 01:36:41 lade kernel: EXT3-fs: mounted filesystem with ordered data mode.Mar 26 01:36:41 lade kernel: kjournald starting. Commit interval 5 seconds Mar 26 01:36:41 lade kernel: EXT3 FS on hda10, internal journal Mar 26 01:36:41 lade kernel: EXT3-fs: mounted filesystem with ordered data mode.Mar 26 01:36:41 lade kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Mar 26 01:36:41 lade kernel: ts: Compaq touchscreen protocol output Mar 26 01:36:41 lade kernel: ohci_hcd 0000:00:13.0: PCI device 1002:4347 (ATI Technologies Inc) Mar 26 01:36:41 lade kernel: ohci_hcd 0000:00:13.0: irq 11, pci mem f896f000 Mar 26 01:36:41 lade kernel: ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 Mar 26 01:36:41 lade kernel: hub 2-0:1.0: USB hub found Mar 26 01:36:41 lade kernel: hub 2-0:1.0: 3 ports detected Mar 26 01:36:41 lade kernel: ohci_hcd 0000:00:13.1: PCI device 1002:4348 (ATI Technologies Inc) Mar 26 01:36:41 lade kernel: ohci_hcd 0000:00:13.1: irq 11, pci mem f89b1000 Mar 26 01:36:41 lade kernel: ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 Mar 26 01:36:41 lade kernel: hub 3-0:1.0: USB hub found Mar 26 01:36:41 lade kernel: hub 3-0:1.0: 3 ports detected Mar 26 01:36:41 lade kernel: ohci_hcd 0000:02:07.0: NEC Corporation USB Mar 26 01:36:41 lade kernel: ohci_hcd 0000:02:07.0: irq 10, pci mem f89fd000 Mar 26 01:36:41 lade kernel: ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4 Mar 26 01:36:41 lade kernel: hub 4-0:1.0: USB hub found Mar 26 01:36:41 lade kernel: hub 4-0:1.0: 3 ports detected Mar 26 01:36:41 lade kernel: ohci_hcd 0000:02:07.1: NEC Corporation USB (#2) Mar 26 01:36:41 lade kernel: ohci_hcd 0000:02:07.1: irq 5, pci mem f89ff000 Mar 26 01:36:41 lade kernel: ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5 Mar 26 01:36:41 lade kernel: hub 5-0:1.0: USB hub found Mar 26 01:36:41 lade kernel: hub 5-0:1.0: 2 ports detected Mar 26 01:36:41 lade kernel: Call Trace: Mar 26 01:36:41 lade kernel: [__report_bad_irq+43/140] __report_bad_irq+0x2b/0x8c Mar 26 01:36:41 lade kernel: [note_interrupt+105/153] note_interrupt+0x69/0x99 Mar 26 01:36:41 lade kernel: [do_IRQ+317/361] do_IRQ+0x13d/0x169 Mar 26 01:36:41 lade kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20 Mar 26 01:36:41 lade kernel: [do_softirq+68/154] do_softirq+0x44/0x9a Mar 26 01:36:41 lade kernel: [do_IRQ+282/361] do_IRQ+0x11a/0x169 Mar 26 01:36:41 lade kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20 Mar 26 01:36:41 lade kernel: [acpi_processor_idle+194/482] acpi_processor_idle+0xc2/0x1e2 Mar 26 01:36:41 lade kernel: [cpu_idle+47/56] cpu_idle+0x2f/0x38 Mar 26 01:36:41 lade kernel: [start_kernel+411/472] start_kernel+0x19b/0x1d8 Mar 26 01:36:41 lade kernel: [unknown_bootoption+0/264] unknown_bootoption+0x0/0x108 Mar 26 01:36:41 lade kernel: Mar 26 01:36:41 lade kernel: atiixp: codec read timeout Mar 26 01:36:41 lade last message repeated 243 times Mar 26 01:36:41 lade kernel: AC'97 2 does not respond - RESET Mar 26 01:36:41 lade kernel: atiixp: codec read timeout Mar 26 01:36:41 lade kernel: atiixp: codec read timeout Mar 26 01:36:41 lade kernel: ATI IXP AC97 controller: probe of 0000:00:14.5 failed with error -5 Mar 26 01:36:41 lade kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled Mar 26 01:36:41 lade kernel: ohci1394: $Rev: 1172 $ Ben Collins <bcollins@debian.org> Mar 26 01:36:41 lade kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e8208000-e82087ff] Max Packet=[2048] Mar 26 01:36:41 lade kernel: 8139too Fast Ethernet driver 0.9.27 Mar 26 01:36:41 lade kernel: eth0: RealTek RTL8139 at 0xf9a61800, 00:02:3f:69:be:4f, IRQ 11 Mar 26 01:36:41 lade kernel: Linux Kernel Card Services Mar 26 01:36:41 lade kernel: options: [pci] [cardbus] [pm] Mar 26 01:36:41 lade kernel: Yenta: CardBus bridge found at 0000:02:04.0 [103c:006b] Mar 26 01:36:41 lade kernel: Yenta: ISA IRQ mask 0x00d8, PCI irq 10 Mar 26 01:36:41 lade kernel: Socket status: 30000006 Mar 26 01:36:41 lade kernel: Yenta: CardBus bridge found at 0000:02:04.1 [103c:006b] Mar 26 01:36:41 lade kernel: Yenta: ISA IRQ mask 0x00d8, PCI irq 10 Mar 26 01:36:41 lade kernel: Socket status: 30000006 Mar 26 01:36:41 lade kernel: ip1394: $Rev: 1175 $ Ben Collins <bcollins@debian.org> Mar 26 01:36:45 lade kernel: NET: Registered protocol family 10 Mar 26 01:36:45 lade kernel: Disabled Privacy Extensions on device c0374de0(lo) Mar 26 01:36:45 lade kernel: IPv6 over IPv4 tunneling driver Mar 26 01:36:46 lade kernel: lp: driver loaded but no devices found Mar 26 01:36:49 lade kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7 Mar 26 01:36:49 lade kernel: cs: IO port probe 0x0800-0x08ff: clean. Mar 26 01:36:49 lade kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x20f 0x3c0-0x3df 0x408-0x40f 0x4d0-0x4d7 Mar 26 01:36:49 lade kernel: cs: IO port probe 0x0a00-0x0aff: clean. Mar 26 01:37:46 lade kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 lade:root# cat /proc/interrupts CPU0 0: 657230 XT-PIC timer 1: 1628 XT-PIC i8042 2: 0 XT-PIC cascade 5: 100000 XT-PIC ohci_hcd 8: 4 XT-PIC rtc 9: 0 XT-PIC acpi 10: 37093 XT-PIC ohci_hcd, ohci1394, yenta, yenta, radeon@PCI:1:5:0 11: 1301 XT-PIC ehci_hcd, ohci_hcd, ohci_hcd, eth0 12: 23954 XT-PIC i8042 14: 11580 XT-PIC ide0 15: 48 XT-PIC ide1 NMI: 0 LOC: 657157 ERR: 35490 MIS: 0 lade:root# cat /proc/cmdline BOOT_IMAGE=Linux-2.6 ro root=305 noapic ^ permalink raw reply [flat|nested] 16+ messages in thread
[parent not found: <1080284583.2439.8.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org>]
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken [not found] ` <1080284583.2439.8.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org> @ 2004-03-26 7:33 ` Len Brown 2004-03-26 7:43 ` Len Brown 2004-03-26 7:55 ` Len Brown 2 siblings, 0 replies; 16+ messages in thread From: Len Brown @ 2004-03-26 7:33 UTC (permalink / raw) To: Trond Myklebust; +Cc: ACPI Developers > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) yes, you're blessed with a system with non-identity SCI over-ride;-) > evgpeblk-0747 [06] ev_create_gpe_block : GPE 00 to 31 [_GPE] 4 regs at 0000000000008020 on int 9 > evevent-0133: *** Error: Unable to install System Control Interrupt Handler, AE_NOT_ACQUIRED > evxfevnt-0139 [06] acpi_disable : ACPI mode disabled and it gets AE_NOT_ACQUIRED as expected and goes downhill from there... if you can apply the patch and try IOAPIC mode again, that would be great. thanks, -Len ps -------- not sure what is the matter with "noapic" mode. This might be a different problem. may need to back out the latest ACPICA to see if the "Handle is NULL" thingie is new. ACPI: Using PIC for interrupt routing Mar 26 01:36:41 lade kernel: nsxfeval-0241 [07] acpi_evaluate_object : Handle is NULL and Pathname is relative ... Call Trace: [__report_bad_irq+43/140] __report_bad_irq+0x2b/0x8c [note_interrupt+105/153] note_interrupt+0x69/0x99 [do_IRQ+317/361] do_IRQ+0x13d/0x169 [common_interrupt+24/32] common_interrupt+0x18/0x20 [do_softirq+68/154] do_softirq+0x44/0x9a [do_IRQ+282/361] do_IRQ+0x11a/0x169 [common_interrupt+24/32] common_interrupt+0x18/0x20 [acpi_processor_idle+194/482] acpi_processor_idle+0xc2/0x1e2 [cpu_idle+47/56] cpu_idle+0x2f/0x38 [start_kernel+411/472] start_kernel+0x19b/0x1d8 [unknown_bootoption+0/264] unknown_bootoption+0x0/0x108 ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken [not found] ` <1080284583.2439.8.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org> 2004-03-26 7:33 ` Len Brown @ 2004-03-26 7:43 ` Len Brown [not found] ` <1080287004.748.187.camel-D2Zvc0uNKG8@public.gmane.org> 2004-03-26 7:55 ` Len Brown 2 siblings, 1 reply; 16+ messages in thread From: Len Brown @ 2004-03-26 7:43 UTC (permalink / raw) To: Trond Myklebust; +Cc: ACPI Developers Trond, Can you also try this simple patch all by itself to see if when acpi_disable() does get invoked, if we can possibly cause less damage to the system? thanks, -Len ===== drivers/acpi/events/evxfevnt.c 1.19 vs edited ===== --- 1.19/drivers/acpi/events/evxfevnt.c Sat Jan 17 18:12:31 2004 +++ edited/drivers/acpi/events/evxfevnt.c Fri Mar 26 02:38:17 2004 @@ -139,6 +139,8 @@ ACPI_DEBUG_PRINT ((ACPI_DB_INIT, "ACPI mode disabled\n")); } + disable_acpi(); + return_ACPI_STATUS (status); } ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click ^ permalink raw reply [flat|nested] 16+ messages in thread
[parent not found: <1080287004.748.187.camel-D2Zvc0uNKG8@public.gmane.org>]
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken [not found] ` <1080287004.748.187.camel-D2Zvc0uNKG8@public.gmane.org> @ 2004-03-26 18:55 ` Trond Myklebust 0 siblings, 0 replies; 16+ messages in thread From: Trond Myklebust @ 2004-03-26 18:55 UTC (permalink / raw) To: Len Brown; +Cc: ACPI Developers [-- Attachment #1: Type: text/plain, Size: 776 bytes --] På fr , 26/03/2004 klokka 02:43, skreiv Len Brown: > Trond, > Can you also try this simple patch all by itself > to see if when acpi_disable() does get invoked, if > we can possibly cause less damage to the system? > > thanks, > -Len > > ===== drivers/acpi/events/evxfevnt.c 1.19 vs edited ===== > --- 1.19/drivers/acpi/events/evxfevnt.c Sat Jan 17 18:12:31 2004 > +++ edited/drivers/acpi/events/evxfevnt.c Fri Mar 26 02:38:17 2004 > @@ -139,6 +139,8 @@ > ACPI_DEBUG_PRINT ((ACPI_DB_INIT, "ACPI mode disabled\n")); > } > > + disable_acpi(); > + > return_ACPI_STATUS (status); > } So I backed out you previous patch and applied the above patch. The resulting system is still unusable: networking, sound, etc. all down... Cheers, Trond [-- Attachment #2: bad_gnurr3.txt --] [-- Type: text/plain, Size: 22760 bytes --] Linux version 2.6.5-rc2 (trondmy@lade.trondhjem.org) (gcc version 3.3.3 (Debian 20040321)) #5 Fri Mar 26 13:42:04 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000004ff70000 (usable) BIOS-e820: 000000004ff70000 - 000000004ff7d000 (ACPI data) BIOS-e820: 000000004ff7d000 - 000000004ff80000 (ACPI NVS) BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved) BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 383MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6620 On node 0 totalpages: 327536 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 98160 pages, LIFO batch:16 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f66b0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x4ff79195 ACPI: FADT (v001 HP Chinook 0x06040000 ATI 0x000f4240) @ 0x4ff7ce7d ACPI: SSDT (v001 PTLTD ACPIPST1 0x06040000 LTP 0x00000001) @ 0x4ff7cef1 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x4ff7cfa6 ACPI: DSDT (v001 HP SB200 0x06040000 INTL 0x20030509) @ 0x00000000 ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 1 IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: auto BOOT_IMAGE=Linux-2.6 ro root=305 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 3066.751 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Memory: 1292888k/1310144k available (1870k kernel code, 16136k reserved, 866k data, 160k init, 392640k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 6094.84 BogoMIPS Security Scaffold v1.0.0 initialized Capability LSM initialized Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 1-0, 1-9, 1-16, 1-17, 1-18, 1-19, 1-20, 1-22, 1-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 3066.0290 MHz. ..... host bus clock speed is 133.0316 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040311 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:...................................................................................................................... Table [DSDT](id F005) - 499 Objects with 47 Devices 118 Methods 22 Regions Parsing all Control Methods: Table [SSDT](id F003) - 3 Objects with 0 Devices 0 Methods 0 Regions ACPI Namespace successfully loaded at root c03fbc3c evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0747 [06] ev_create_gpe_block : GPE 00 to 31 [_GPE] 4 regs at 0000000000008020 on int 9 ACPI: SCI (IRQ0) allocation failed evevent-0133: *** Error: Unable to install System Control Interrupt Handler, AE_NOT_ACQUIRED ACPI: Unable to start the ACPI Interpreter evxfevnt-0139 [06] acpi_disable : ACPI mode disabled utalloc-0945 [05] ut_dump_allocations : No outstanding allocations. Linux Plug and Play Support v0.97 (c) Adam Belay ACPI: ACPI tables contain no PCI IRQ routing entries PCI: Invalid ACPI-PCI IRQ routing table PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Transparent bridge - 0000:00:14.4 PCI: Using IRQ router default [1002/434c] at 0000:00:14.3 PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 1! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 2! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 2! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 2! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 2! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 2! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 2! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 2! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 2! PCI BIOS passed nonexistent PCI bus 0! Machine check exception polling timer started. Total HugeTLB memory allocated, 0 ikconfig 0.7 with /proc/config* highmem bounce pool size: 64 pages Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Using anticipatory io scheduler floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 PCI BIOS passed nonexistent PCI bus 0! ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8060-0x8067, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x8068-0x806f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK8025GAS, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: SD-R6252, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 atkbd.c: Unknown key pressed (raw set 0, code 0x17e on isa0060/serio2). atkbd.c: Use 'setkeycodes 7e <keycode>' to make it known. serio: i8042 AUX2 port at 0x60,0x64 irq 12 atkbd.c: Unknown key pressed (raw set 0, code 0x17e on isa0060/serio3). atkbd.c: Use 'setkeycodes 7e <keycode>' to make it known. serio: i8042 AUX3 port at 0x60,0x64 irq 12 input: PS/2 Generic Mouse on isa0060/serio4 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 BIOS EDD facility v0.13 2004-Mar-09, 1 devices found Please report your BIOS at http://linux.dell.com/edd/results.html kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 160k freed blk: queue f7d16290, I/O limit 4095Mb (mask 0xffffffff) Adding 2008084k swap on /dev/hda6. Priority:-1 extents:1 EXT3 FS on hda5, internal journal drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ehci_hcd 0000:02:07.2: NEC Corporation USB 2.0 ehci_hcd 0000:02:07.2: irq 11, pci mem f8929c00 ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:02:07.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected Ati IGP9100/M chipset agpgart: Maximum main memory to use for agp memory: 1185M agpgart: AGP aperture is 32M @ 0xea000000 radeonfb: Invalid ROM signature 0 should be 0xaa55 radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=215.00 Mhz, System=220.00 MHz Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: SEC radeonfb: detected LVDS panel size from BIOS: 1680x1050 radeondb: BIOS provided dividers will be used radeonfb: Power Management enabled for Mobility chipsets radeonfb: ATI Radeon \a DDR SGRAM 64 MB Console: switching to colour frame buffer device 210x65 Non-volatile memory driver v1.2 kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ts: Compaq touchscreen protocol output ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:13.0: PCI device 1002:4347 (ATI Technologies Inc) ohci_hcd 0000:00:13.0: irq 11, pci mem f8960000 ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI device 1002:4348 (ATI Technologies Inc) ohci_hcd 0000:00:13.1: irq 11, pci mem f89a2000 ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:02:07.0: NEC Corporation USB ohci_hcd 0000:02:07.0: irq 10, pci mem f89ee000 ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:02:07.1: NEC Corporation USB (#2) ohci_hcd 0000:02:07.1: irq 5, pci mem f89f0000 ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout AC'97 2 does not respond - RESET atiixp: codec read timeout atiixp: codec read timeout AC'97 2 access is not valid [0xffffffff], removing mixer. ATI IXP AC97 controller: probe of 0000:00:14.5 failed with error -5 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1172 $ Ben Collins <bcollins@debian.org> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e8208000-e82087ff] Max Packet=[2048] 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xf9a52800, 00:02:3f:69:be:4f, IRQ 11 eth0: Identified 8139 chip type 'RTL-8101' Linux Kernel Card Services options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:02:04.0 [103c:006b] Yenta: ISA IRQ mask 0x00d8, PCI irq 10 Socket status: 30000006 Yenta: CardBus bridge found at 0000:02:04.1 [103c:006b] Yenta: ISA IRQ mask 0x00d8, PCI irq 10 Socket status: 30000006 NET: Registered protocol family 10 Disabled Privacy Extensions on device c0374de0(lo) IPv6 over IPv4 tunneling driver lp: driver loaded but no devices found cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7 cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x20f 0x3c0-0x3df 0x408-0x40f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. Bluetooth: Core ver 2.4 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.1 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM ver 1.2 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized apm: BIOS not found. apm: BIOS not found. [drm] Initialized radeon 1.9.0 20020828 on minor 0 agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:01:05.0 into 4x mode [drm] Loading R200 Microcode atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: no IPv6 routers present NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx queue start entry 4 dirty entry 0. eth0: Tx descriptor 0 is 00002000. (queue head) eth0: Tx descriptor 1 is 00002000. eth0: Tx descriptor 2 is 00002000. eth0: Tx descriptor 3 is 00002000. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx queue start entry 4 dirty entry 0. eth0: Tx descriptor 0 is 00002000. (queue head) eth0: Tx descriptor 1 is 00002000. eth0: Tx descriptor 2 is 00002000. eth0: Tx descriptor 3 is 00002000. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx queue start entry 4 dirty entry 0. eth0: Tx descriptor 0 is 00002000. (queue head) eth0: Tx descriptor 1 is 00002000. eth0: Tx descriptor 2 is 00002000. eth0: Tx descriptor 3 is 00002000. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx queue start entry 4 dirty entry 0. eth0: Tx descriptor 0 is 00002000. (queue head) eth0: Tx descriptor 1 is 00002000. eth0: Tx descriptor 2 is 00002000. eth0: Tx descriptor 3 is 00002000. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 CPU0 0: 154849 IO-APIC-edge timer 1: 174 IO-APIC-edge i8042 2: 0 XT-PIC cascade 5: 1 IO-APIC-edge ohci_hcd 8: 4 IO-APIC-edge rtc 10: 0 IO-APIC-edge ohci_hcd, ohci1394, yenta, yenta, radeon@PCI:1:5:0 11: 5 IO-APIC-edge ehci_hcd, ohci_hcd, ohci_hcd, eth0 12: 65 IO-APIC-edge i8042 14: 4222 IO-APIC-edge ide0 15: 48 IO-APIC-edge ide1 NMI: 0 LOC: 154742 ERR: 0 MIS: 0 auto BOOT_IMAGE=Linux-2.6 ro root=305 ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken [not found] ` <1080284583.2439.8.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org> 2004-03-26 7:33 ` Len Brown 2004-03-26 7:43 ` Len Brown @ 2004-03-26 7:55 ` Len Brown [not found] ` <1080287755.757.194.camel-D2Zvc0uNKG8@public.gmane.org> 2 siblings, 1 reply; 16+ messages in thread From: Len Brown @ 2004-03-26 7:55 UTC (permalink / raw) To: Trond Myklebust; +Cc: ACPI Developers > acpi_fadt.sci_int 21 acpi_sci_override_gsi 21 oh, i see you tried out the patch. weird, this should say acpi_fadt.sci_int 9 acpi_sci_override_gsi 21 the fact that they're the same means the patch had no effect. did it apply cleanly? If you applied it by hand, please note that the assignement was _replaced_ by the printk, so acpi_fadt.sci_int should still be 9. thanks, -len ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click ^ permalink raw reply [flat|nested] 16+ messages in thread
[parent not found: <1080287755.757.194.camel-D2Zvc0uNKG8@public.gmane.org>]
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken [not found] ` <1080287755.757.194.camel-D2Zvc0uNKG8@public.gmane.org> @ 2004-03-26 18:38 ` Trond Myklebust [not found] ` <1080326310.2448.2.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org> 0 siblings, 1 reply; 16+ messages in thread From: Trond Myklebust @ 2004-03-26 18:38 UTC (permalink / raw) To: Len Brown; +Cc: ACPI Developers [-- Attachment #1: Type: text/plain, Size: 512 bytes --] På fr , 26/03/2004 klokka 02:55, skreiv Len Brown: > > acpi_fadt.sci_int 21 acpi_sci_override_gsi 21 > > oh, i see you tried out the patch. > weird, this should say > acpi_fadt.sci_int 9 acpi_sci_override_gsi 21 Duh... Sorry about that. As you guessed, I applied by hand, and screwed up the removal of the assignment. Here's the revised output. Note that all devices now appear to be working (including that sound driver that was failing to work when only doing "noapic")... Cheers, Trond [-- Attachment #2: working.txt --] [-- Type: text/plain, Size: 18080 bytes --] Linux version 2.6.5-rc2 (trondmy@lade.trondhjem.org) (gcc version 3.3.3 (Debian 20040321)) #4 Fri Mar 26 13:25:14 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000004ff70000 (usable) BIOS-e820: 000000004ff70000 - 000000004ff7d000 (ACPI data) BIOS-e820: 000000004ff7d000 - 000000004ff80000 (ACPI NVS) BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved) BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 383MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6620 On node 0 totalpages: 327536 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 98160 pages, LIFO batch:16 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f66b0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x4ff79195 ACPI: FADT (v001 HP Chinook 0x06040000 ATI 0x000f4240) @ 0x4ff7ce7d ACPI: SSDT (v001 PTLTD ACPIPST1 0x06040000 LTP 0x00000001) @ 0x4ff7cef1 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x4ff7cfa6 ACPI: DSDT (v001 HP SB200 0x06040000 INTL 0x20030509) @ 0x00000000 ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 1 IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: BOOT_IMAGE=Linux-2.6 ro root=305 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 3066.907 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Memory: 1292888k/1310144k available (1870k kernel code, 16136k reserved, 866k data, 160k init, 392640k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 6094.84 BogoMIPS Security Scaffold v1.0.0 initialized Capability LSM initialized Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 1-0, 1-9, 1-16, 1-17, 1-18, 1-19, 1-20, 1-22, 1-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 3066.0265 MHz. ..... host bus clock speed is 133.0315 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040311 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:...................................................................................................................... Table [DSDT](id F005) - 499 Objects with 47 Devices 118 Methods 22 Regions Parsing all Control Methods: Table [SSDT](id F003) - 3 Objects with 0 Devices 0 Methods 0 Regions ACPI Namespace successfully loaded at root c03fbc3c acpi_fadt.sci_int 9 acpi_sci_override_gsi 21 evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0747 [06] ev_create_gpe_block : GPE 00 to 31 [_GPE] 4 regs at 0000000000008020 on int 9 Completing Region/Field/Buffer/Package initialization:................................................................. Initialized 22/22 Regions 1/1 Fields 22/22 Buffers 20/20 Packages (511 nodes) Executing all Device _STA and_INI methods:................................................. 49 Devices found containing: 49 _STA, 1 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing nsxfeval-0241 [07] acpi_evaluate_object : Handle is NULL and Pathname is relative nsxfeval-0241 [07] acpi_evaluate_object : Handle is NULL and Pathname is relative nsxfeval-0241 [07] acpi_evaluate_object : Handle is NULL and Pathname is relative nsxfeval-0241 [07] acpi_evaluate_object : Handle is NULL and Pathname is relative ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Link [LNK0] (IRQs 5 10 11) ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 11) ACPI: Embedded Controller [EC0] (gpe 6) Linux Plug and Play Support v0.97 (c) Adam Belay IOAPIC[0]: Set PCI routing entry (1-19 -> 0xa9 -> IRQ 19 Mode:1 Active:1) 00:00:13[A] -> 1-19 -> IRQ 169 IOAPIC[0]: Set PCI routing entry (1-16 -> 0xb1 -> IRQ 16 Mode:1 Active:1) 00:00:14[A] -> 1-16 -> IRQ 177 IOAPIC[0]: Set PCI routing entry (1-5 -> 0x51 -> IRQ 5 Mode:1 Active:1) 00:00:14[B] -> 1-5 -> IRQ 5 IOAPIC[0]: Set PCI routing entry (1-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1) 00:02:02[A] -> 1-18 -> IRQ 185 IOAPIC[0]: Set PCI routing entry (1-17 -> 0xc1 -> IRQ 17 Mode:1 Active:1) 00:02:04[A] -> 1-17 -> IRQ 193 number of MP IRQ sources: 15. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 01000000 ....... : arbitration: 01 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 1 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 1 1 0 1 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 000 00 1 0 0 0 0 0 0 00 0a 001 01 0 0 0 0 0 1 1 71 0b 001 01 0 0 0 0 0 1 1 79 0c 001 01 0 0 0 0 0 1 1 81 0d 001 01 0 0 0 0 0 1 1 89 0e 001 01 0 0 0 0 0 1 1 91 0f 001 01 0 0 0 0 0 1 1 99 10 001 01 1 1 0 1 0 1 1 B1 11 001 01 1 1 0 1 0 1 1 C1 12 001 01 1 1 0 1 0 1 1 B9 13 001 01 1 1 0 1 0 1 1 A9 14 000 00 1 0 0 0 0 0 0 00 15 001 01 0 1 0 1 0 1 1 A1 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5-> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:21 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Machine check exception polling timer started. Total HugeTLB memory allocated, 0 ikconfig 0.7 with /proc/config* highmem bounce pool size: 64 pages Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Processor [CPU0] (supports C1 C2) ACPI: Thermal Zone [THRM] (55 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Using anticipatory io scheduler floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8060-0x8067, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x8068-0x806f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK8025GAS, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: SD-R6252, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 atkbd.c: Unknown key pressed (raw set 0, code 0x17e on isa0060/serio2). atkbd.c: Use 'setkeycodes 7e <keycode>' to make it known. serio: i8042 AUX2 port at 0x60,0x64 irq 12 atkbd.c: Unknown key pressed (raw set 0, code 0x17e on isa0060/serio3). atkbd.c: Use 'setkeycodes 7e <keycode>' to make it known. serio: i8042 AUX3 port at 0x60,0x64 irq 12 input: PS/2 Generic Mouse on isa0060/serio4 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 BIOS EDD facility v0.13 2004-Mar-09, 1 devices found Please report your BIOS at http://linux.dell.com/edd/results.html kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 160k freed blk: queue f7cc7ccc, I/O limit 4095Mb (mask 0xffffffff) Adding 2008084k swap on /dev/hda6. Priority:-1 extents:1 EXT3 FS on hda5, internal journal cpufreq: CPU0 - ACPI performance management activated. cpufreq: *P0: 3059 MHz, 0 mW, 250 uS cpufreq: P1: 1596 MHz, 0 mW, 250 uS drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ehci_hcd 0000:02:07.2: NEC Corporation USB 2.0 ehci_hcd 0000:02:07.2: irq 169, pci mem f8938c00 ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:02:07.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected Ati IGP9100/M chipset agpgart: Maximum main memory to use for agp memory: 1185M agpgart: AGP aperture is 32M @ 0xea000000 radeonfb: Invalid ROM signature 0 should be 0xaa55 radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=215.00 Mhz, System=220.00 MHz Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: SEC radeonfb: detected LVDS panel size from BIOS: 1680x1050 radeondb: BIOS provided dividers will be used radeonfb: Power Management enabled for Mobility chipsets radeonfb: ATI Radeon \a DDR SGRAM 64 MB Console: switching to colour frame buffer device 210x65 Non-volatile memory driver v1.2 kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ts: Compaq touchscreen protocol output ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:13.0: PCI device 1002:4347 (ATI Technologies Inc) ohci_hcd 0000:00:13.0: irq 169, pci mem f896f000 ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI device 1002:4348 (ATI Technologies Inc) ohci_hcd 0000:00:13.1: irq 169, pci mem f89b1000 ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:02:07.0: NEC Corporation USB ohci_hcd 0000:02:07.0: irq 177, pci mem f89fd000 ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:02:07.1: NEC Corporation USB (#2) ohci_hcd 0000:02:07.1: irq 185, pci mem f89ff000 ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout atiixp: codec read timeout Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1172 $ Ben Collins <bcollins@debian.org> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[e8208000-e82087ff] Max Packet=[2048] 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xf9a61800, 00:02:3f:69:be:4f, IRQ 169 eth0: Identified 8139 chip type 'RTL-8101' Linux Kernel Card Services options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:02:04.0 [103c:006b] Yenta: ISA IRQ mask 0x0cd8, PCI irq 193 Socket status: 30000006 Yenta: CardBus bridge found at 0000:02:04.1 [103c:006b] Yenta: ISA IRQ mask 0x0cd8, PCI irq 177 Socket status: 30000006 ieee1394: Host added: ID:BUS[0-00:1023] GUID[3c3f0200fc3e003d] ip1394: $Rev: 1175 $ Ben Collins <bcollins@debian.org> ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) NET: Registered protocol family 10 Disabled Privacy Extensions on device c0374de0(lo) IPv6 over IPv4 tunneling driver lp: driver loaded but no devices found cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7 cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x20f 0x3c0-0x3df 0x408-0x40f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. Bluetooth: Core ver 2.4 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.1 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM ver 1.2 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized apm: BIOS not found. [drm] Initialized radeon 1.9.0 20020828 on minor 0 agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:01:05.0 into 4x mode [drm] Loading R200 Microcode atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. apm: BIOS not found. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:01:05.0 into 4x mode [drm] Loading R200 Microcode SCSI subsystem initialized eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 CPU0 0: 109234 IO-APIC-edge timer 1: 165 IO-APIC-edge i8042 2: 0 XT-PIC cascade 5: 1 IO-APIC-level ATI IXP 8: 4 IO-APIC-edge rtc 9: 17 IO-APIC-level acpi 12: 974 IO-APIC-edge i8042 14: 6710 IO-APIC-edge ide0 15: 48 IO-APIC-edge ide1 169: 53 IO-APIC-level ehci_hcd, ohci_hcd, ohci_hcd, eth0 177: 6797 IO-APIC-level ohci_hcd, ohci1394, yenta, radeon@PCI:1:5:0 185: 0 IO-APIC-level ohci_hcd 193: 0 IO-APIC-level yenta NMI: 0 LOC: 109127 ERR: 0 MIS: 0 BOOT_IMAGE=Linux-2.6 ro root=305 ^ permalink raw reply [flat|nested] 16+ messages in thread
[parent not found: <1080326310.2448.2.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org>]
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken [not found] ` <1080326310.2448.2.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org> @ 2004-03-31 23:54 ` Len Brown 0 siblings, 0 replies; 16+ messages in thread From: Len Brown @ 2004-03-31 23:54 UTC (permalink / raw) To: Trond Myklebust; +Cc: ACPI Developers On Fri, 2004-03-26 at 13:38, Trond Myklebust wrote: > Here's the revised output. Note that all devices now appear to be > working (including that sound driver that was failing to work when only > doing "noapic")... Trond, Can you test the fix here: http://bugzilla.kernel.org/show_bug.cgi?id=2408 It should make this bogus duplicate IRQ->pin mapping go away on IRQ5. thanks, -Len --- IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5-> 0:5 ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click ^ permalink raw reply [flat|nested] 16+ messages in thread
* AE_NOT_ACQUIRED, ACPI: Unable to start the ACPI Interpreter 2004-03-26 5:26 ` Len Brown @ 2004-03-27 0:20 ` Len Brown -1 siblings, 0 replies; 16+ messages in thread From: Len Brown @ 2004-03-27 0:20 UTC (permalink / raw) To: Marc-Christian Petersen, 15444-hqaBeiJFMhqzQB+pC5nmwQ, gigerstyle-OI3hZJvNYWs, trond.myklebust-41N18TsMXrtuMpJDpNschA Cc: Marcel Holtmann, lkml, Andrew Morton, Linus Torvalds, Rik van Ballegooijen, ACPI Developers On Fri, 2004-03-26 at 00:26, Len Brown wrote: > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level) > > > > > ACPI: SCI (IRQ22) allocation failed > > > ACPI-0133: *** Error: Unable to install System Control Interrupt > > Handler, AE_NOT_ACQUIRED > > > ACPI: Unable to start the ACPI Interpreter If you encounter this issue on your hardware, can you help me fix it by testing the latest patch at the URL below? Either attach your dmesg and /proc/interrupts to the bug report or send it to me, and let me know if your power button works? thanks, -Len > > http://bugzilla.kernel.org/show_bug.cgi?id=2366 ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click ^ permalink raw reply [flat|nested] 16+ messages in thread
* AE_NOT_ACQUIRED, ACPI: Unable to start the ACPI Interpreter @ 2004-03-27 0:20 ` Len Brown 0 siblings, 0 replies; 16+ messages in thread From: Len Brown @ 2004-03-27 0:20 UTC (permalink / raw) To: Marc-Christian Petersen, 15444, gigerstyle, trond.myklebust Cc: Marcel Holtmann, lkml, Andrew Morton, Linus Torvalds, Rik van Ballegooijen, ACPI Developers On Fri, 2004-03-26 at 00:26, Len Brown wrote: > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level) > > > > > ACPI: SCI (IRQ22) allocation failed > > > ACPI-0133: *** Error: Unable to install System Control Interrupt > > Handler, AE_NOT_ACQUIRED > > > ACPI: Unable to start the ACPI Interpreter If you encounter this issue on your hardware, can you help me fix it by testing the latest patch at the URL below? Either attach your dmesg and /proc/interrupts to the bug report or send it to me, and let me know if your power button works? thanks, -Len > > http://bugzilla.kernel.org/show_bug.cgi?id=2366 ^ permalink raw reply [flat|nested] 16+ messages in thread
[parent not found: <200403251432.32787@WOLK>]
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken [not found] <200403251432.32787@WOLK> @ 2004-03-25 14:15 ` Rik van Ballegooijen 2004-03-25 17:02 ` Andrew Morton 2004-03-25 23:00 ` Len Brown 1 sibling, 1 reply; 16+ messages in thread From: Rik van Ballegooijen @ 2004-03-25 14:15 UTC (permalink / raw) To: Marc-Christian Petersen; +Cc: lkml, Andrew Morton, Linus Torvalds, Len Brown -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Marc-Christian Petersen wrote: | attached you find my .config and dmesg log booting 2.6.5-rc2-mm3 with ACPI | enabled. Seems something is broken in there. | | Booting with acpi=off "fixes" it ;> | | 2.6.5-rc2-mm2 worked fine. | | Rik, I saw you had the same experience? Please ACK it :) with acpi on it can also run, but not if you supply vga=. I tried with vga=0x317 and it stalls after "Freeing unused kernel memory". When i turn off acpi using acpi=off and also supply vga=0x317 it continues booting, but hangs during execution of bootscripts. An example of this is a script executing /bin/setfont. The complete append line i use is: root=/dev/hda3 debug video=mtrr,vesa:1024x768 vga=0x317 I can send my .config and/or dmesg output on demand, but since i am not the only one with this problem and mcp already send his i did not find it necessary. - -Rik -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFAYumGq1cnhHKeD68RAj9QAKCyEs6msPzcJcsc/WUz+t8e2h+F7wCdHIWd yNirw9Lq76z5liix8yfsQY4= =V48i -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken 2004-03-25 14:15 ` [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken Rik van Ballegooijen @ 2004-03-25 17:02 ` Andrew Morton 2004-03-25 19:51 ` Rik van Ballegooijen 0 siblings, 1 reply; 16+ messages in thread From: Andrew Morton @ 2004-03-25 17:02 UTC (permalink / raw) To: sleight; +Cc: sleightofmind, m.c.p, linux-kernel, torvalds, len.brown Rik van Ballegooijen <sleightofmind@xs4all.nl> wrote: > > with acpi on it can also run, but not if you supply vga=. I tried with > vga=0x317 and it stalls after "Freeing unused kernel memory". When i > turn off acpi using acpi=off and also supply vga=0x317 it continues > booting, but hangs during execution of bootscripts. It would be interesting to try reverting probe_roms-02-fixes.patch and probe_roms-01-move-stuff.patch. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken 2004-03-25 17:02 ` Andrew Morton @ 2004-03-25 19:51 ` Rik van Ballegooijen 2004-03-25 22:35 ` Marc-Christian Petersen 0 siblings, 1 reply; 16+ messages in thread From: Rik van Ballegooijen @ 2004-03-25 19:51 UTC (permalink / raw) To: Andrew Morton; +Cc: sleightofmind, m.c.p, linux-kernel, torvalds, len.brown -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Andrew Morton wrote: | Rik van Ballegooijen <sleightofmind@xs4all.nl> wrote: | |> with acpi on it can also run, but not if you supply vga=. I tried with |> vga=0x317 and it stalls after "Freeing unused kernel memory". When i |> turn off acpi using acpi=off and also supply vga=0x317 it continues |> booting, but hangs during execution of bootscripts. | | | It would be interesting to try reverting probe_roms-02-fixes.patch and | probe_roms-01-move-stuff.patch. Reverting these two patches does nothing. The result is exactly the same as above. Reverting the acpi stuff that went into -bk some days ago does solve the problem. I haven't checked yet which part to be exact causes this though. - -Rik -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFAYzhDq1cnhHKeD68RAv0bAJ0Xt5LaLsizdw8SLENi8AGdsnJmvACgj8L3 dWQa/6iEvC1ilyfZwlWgHok= =sEZU -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken 2004-03-25 19:51 ` Rik van Ballegooijen @ 2004-03-25 22:35 ` Marc-Christian Petersen 0 siblings, 0 replies; 16+ messages in thread From: Marc-Christian Petersen @ 2004-03-25 22:35 UTC (permalink / raw) To: linux-kernel; +Cc: Rik van Ballegooijen, Andrew Morton, torvalds, len.brown On Thursday 25 March 2004 20:51, Rik van Ballegooijen wrote: > | It would be interesting to try reverting probe_roms-02-fixes.patch and > | probe_roms-01-move-stuff.patch. > Reverting these two patches does nothing. The result is exactly the same > as above. > Reverting the acpi stuff that went into -bk some days ago does solve the > problem. I haven't checked yet which part to be exact causes this though. same here. ciao, Marc ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken [not found] <200403251432.32787@WOLK> 2004-03-25 14:15 ` [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken Rik van Ballegooijen @ 2004-03-25 23:00 ` Len Brown 1 sibling, 0 replies; 16+ messages in thread From: Len Brown @ 2004-03-25 23:00 UTC (permalink / raw) To: Marc-Christian Petersen Cc: lkml, Andrew Morton, Linus Torvalds, Rik van Ballegooijen On Thu, 2004-03-25 at 08:32, Marc-Christian Petersen wrote: > Hi all, > > attached you find my .config and dmesg log booting 2.6.5-rc2-mm3 with ACPI > enabled. Seems something is broken in there. > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level) > ACPI: SCI (IRQ22) allocation failed > ACPI-0133: *** Error: Unable to install System Control Interrupt Handler, AE_NOT_ACQUIRED > ACPI: Unable to start the ACPI Interpreter yep, this failure will effect all machines with a non-identity mapped SCI over-ride (your's maps IRQ9 in PIC mode to IRQ22 in IOAPIC mode). another workaround would be to run this kernel with "noapic" till we get a fix in. working this issue here: http://bugzilla.kernel.org/show_bug.cgi?id=2366 thanks, -Len ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2004-03-31 23:54 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <A6974D8E5F98D511BB910002A50A6647615F6523@hdsmsx402.hd.intel.com>
[not found] ` <A6974D8E5F98D511BB910002A50A6647615F6523-N2PTB0HCzHJF3Yvz3xaN/VDQ4js95KgL@public.gmane.org>
2004-03-26 5:26 ` [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken Len Brown
2004-03-26 5:26 ` Len Brown
[not found] ` <1080278805.755.157.camel-D2Zvc0uNKG8@public.gmane.org>
2004-03-26 7:03 ` Trond Myklebust
[not found] ` <1080284583.2439.8.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org>
2004-03-26 7:33 ` Len Brown
2004-03-26 7:43 ` Len Brown
[not found] ` <1080287004.748.187.camel-D2Zvc0uNKG8@public.gmane.org>
2004-03-26 18:55 ` Trond Myklebust
2004-03-26 7:55 ` Len Brown
[not found] ` <1080287755.757.194.camel-D2Zvc0uNKG8@public.gmane.org>
2004-03-26 18:38 ` Trond Myklebust
[not found] ` <1080326310.2448.2.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org>
2004-03-31 23:54 ` Len Brown
2004-03-27 0:20 ` AE_NOT_ACQUIRED, ACPI: Unable to start the ACPI Interpreter Len Brown
2004-03-27 0:20 ` Len Brown
[not found] <200403251432.32787@WOLK>
2004-03-25 14:15 ` [BUG 2.6.5-rc2-bk5 and 2.6.5-rc2-mm3] ACPI seems to be broken Rik van Ballegooijen
2004-03-25 17:02 ` Andrew Morton
2004-03-25 19:51 ` Rik van Ballegooijen
2004-03-25 22:35 ` Marc-Christian Petersen
2004-03-25 23:00 ` Len Brown
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.