From: Pat LaVarre <p.lavarre@ieee.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org
Subject: Re: [PATCH] libata DMADIR support
Date: 18 May 2004 16:40:24 -0600 [thread overview]
Message-ID: <1084920024.3191.8.camel@patibmrh9> (raw)
In-Reply-To: <40A93E85.4010904@pobox.com>
> Feel free to play around. :)
>
> Silicon Image is sending me a couple bridges, we'll see how they
> behave.
Heads up, I have a second sample of hardware now:
kernel: ata_exec_command_pio: ata2: cmd 0xA1
kernel: ata2: dev 0 cfg 49:0e00 82:4218 83:4000 84:4000 85:4218 86:0000 87:4000 88:0000
Its ata_piix.ko op x12 "INQUIRY" doesn't yet work at all, perhaps by way
of more accurately simulating what we may see in mass distribution.
You'll remember, the first hardware sample I acquired was a
massively-distributed PATA ATAPI DMA drive combined with an Si 3611CT80
r1.4 SATA/ PATA bridge.
My second sample is that same bridge, but now with a different drive
behind it, specifically a drive whose firmware purportedly implements
the "d1532v1r4b ATA-ATAPI-7.pdf" proposal to substitute:
PATA ATAPI:
id[49] = id[ 7 * 8 - 8 + 1] = x0F00 // DMA
id[62] = id[ 8 * 8 - 8 + 6] = x0000 // SWDMA not
id[63] = id[ 8 * 8 - 8 + 7] = x0007 // MWDMA 2 1 0
id[88] = id[12 * 8 - 8 + 0] = xXX3F // UDMA 5 4 2 1 0
SATA ATAPI per 2004-04-21 d1532v1r4b:
id[49] = id[ 7 * 8 - 8 + 1] = x0E00
id[62] = id[ 8 * 8 - 8 + 6] = x87FF // ATA-7: DMADIR, ATA-2: SWDMA 2 1 0
id[63] = id[ 8 * 8 - 8 + 7] = x0000
id[88] = id[12 * 8 - 8 + 0] = xXX00
I'll go digging now.
I imagine I'll find I can most concisely make this work by copying into
words 49 63 88 the bits of word 62.
Pat LaVarre
next prev parent reply other threads:[~2004-05-18 22:40 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-16 14:19 [PATCH] libata DMADIR support Pat LaVarre
2004-05-16 23:16 ` Jeff Garzik
2004-05-17 18:48 ` Pat LaVarre
2004-05-17 19:08 ` Jeff Garzik
2004-05-17 21:06 ` Pat LaVarre
2004-05-17 21:40 ` Jeff Garzik
2004-05-17 21:20 ` Pat LaVarre
2004-05-17 21:32 ` Jeff Garzik
2004-05-17 21:34 ` Jeff Garzik
2004-05-17 22:05 ` Pat LaVarre
2004-05-17 22:36 ` Jeff Garzik
2004-05-17 23:04 ` Pat LaVarre
2004-05-18 22:40 ` Pat LaVarre [this message]
2004-05-18 23:07 ` Pat LaVarre
2004-05-18 23:50 ` Jeff Garzik
2004-05-19 22:47 ` Pat LaVarre
2004-05-18 23:48 ` [PATCH] atapi request sense work Jeff Garzik
2004-05-19 20:35 ` Pat LaVarre
2004-05-19 22:19 ` Jeff Garzik
2004-05-19 22:24 ` Pat LaVarre
2004-05-19 22:27 ` Pat LaVarre
2004-05-19 22:54 ` Pat LaVarre
2004-05-21 1:58 ` Pat LaVarre
[not found] ` <6 E36A 11B-AACB-11D8-8B8A-003065635034@ieee.org>
2004-05-21 2:06 ` Pat LaVarre
2004-05-21 3:05 ` Pat LaVarre
2004-05-21 4:04 ` Jeff Garzik
[not found] ` <1 085153750.6103.33.camel@patibmrh9>
2004-05-21 15:35 ` Pat LaVarre
2004-05-21 15:46 ` Bartlomiej Zolnierkiewicz
2004-05-21 17:59 ` Pat LaVarre
2004-05-21 20:07 ` Pat LaVarre
2004-05-21 21:51 ` Jeff Garzik
2004-05-21 23:12 ` Pat LaVarre
2004-05-21 23:24 ` Pat LaVarre
2004-05-21 23:55 ` Jeff Garzik
2004-05-21 23:57 ` Pat LaVarre
2004-05-21 23:39 ` Pat LaVarre
2004-05-21 23:45 ` Jeff Garzik
2004-05-22 0:06 ` Pat LaVarre
2004-05-22 0:12 ` Pat LaVarre
2004-05-22 0:33 ` Pat LaVarre
2004-05-22 1:11 ` Pat LaVarre
2004-05-26 21:49 ` Pat LaVarre
2004-05-27 23:12 ` Pat LaVarre
2004-05-27 23:32 ` Jeff Garzik
2004-05-27 23:38 ` Pat LaVarre
2004-05-27 23:41 ` Jeff Garzik
2004-05-28 0:13 ` Pat LaVarre
2004-05-28 1:28 ` Pat LaVarre
2004-05-24 15:27 ` Pat LaVarre
2004-05-21 21:59 ` Pat LaVarre
2004-05-21 18:23 ` Danny Cox
2004-05-21 18:39 ` Bartlomiej Zolnierkiewicz
2004-05-21 18:55 ` [PATCH] kmalloc old_hwif Danny Cox
2004-05-21 19:00 ` [PATCH] atapi request sense work Danny Cox
2004-05-21 19:08 ` Bartlomiej Zolnierkiewicz
-- strict thread matches above, loose matches on Subject: below --
2004-05-15 21:46 [PATCH] libata DMADIR support Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1084920024.3191.8.camel@patibmrh9 \
--to=p.lavarre@ieee.org \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.