From: Pat LaVarre <p.lavarre@ieee.org>
To: linux-ide@vger.kernel.org
Subject: Re: [PATCH] atapi request sense work
Date: 21 May 2004 14:07:05 -0600 [thread overview]
Message-ID: <1085170025.3083.91.camel@patibmrh9> (raw)
In-Reply-To: <1085162347.4791.24.camel@patibmrh9>
Without auto sense, we read and write ok ...
But when I try a no-data op x00 "TEST UNIT READY", I get:
kernel: ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 47 c0 01
kernel: ata_scsi_translate: ENTER
kernel: ata_dev_select: ENTER, ata2: device 0, wait 1
kernel: ata_tf_load_pio: feat 0x0 nsect 0x0 lba 0x0 0x0 0x0
kernel: ata_tf_load_pio: device 0xA0
kernel: ata_exec_command_pio: ata2: cmd 0xA0
kernel: ata_scsi_translate: EXIT
kernel: atapi_packet_task: busy wait
kernel: atapi_packet_task: send cdb
kernel: ata_host_intr: BUS_NODATA (drv_stat 0x50)
kernel: irq 18: nobody cared!
kernel: [<c01081d7>] __report_bad_irq+0x2a/0x8b
kernel: [<c01082c1>] note_interrupt+0x6f/0x9f
kernel: [<c01085f5>] do_IRQ+0x175/0x1a6
kernel: [<c0103c9e>] default_idle+0x0/0x2d
kernel: [<c01067b8>] common_interrupt+0x18/0x20
kernel: [<c0103c9e>] default_idle+0x0/0x2d
kernel: [<c0103cc8>] default_idle+0x2a/0x2d
kernel: [<c0103d3c>] cpu_idle+0x37/0x40
kernel: [<c011de99>] printk+0x198/0x1f1
kernel:
kernel: handlers:
kernel: [<df9986a8>] (ata_interrupt+0x0/0x1b9 [libata])
kernel: Disabling IRQ #18
Pat LaVarre
next prev parent reply other threads:[~2004-05-21 20:07 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-16 14:19 [PATCH] libata DMADIR support Pat LaVarre
2004-05-16 23:16 ` Jeff Garzik
2004-05-17 18:48 ` Pat LaVarre
2004-05-17 19:08 ` Jeff Garzik
2004-05-17 21:06 ` Pat LaVarre
2004-05-17 21:40 ` Jeff Garzik
2004-05-17 21:20 ` Pat LaVarre
2004-05-17 21:32 ` Jeff Garzik
2004-05-17 21:34 ` Jeff Garzik
2004-05-17 22:05 ` Pat LaVarre
2004-05-17 22:36 ` Jeff Garzik
2004-05-17 23:04 ` Pat LaVarre
2004-05-18 22:40 ` Pat LaVarre
2004-05-18 23:07 ` Pat LaVarre
2004-05-18 23:50 ` Jeff Garzik
2004-05-19 22:47 ` Pat LaVarre
2004-05-18 23:48 ` [PATCH] atapi request sense work Jeff Garzik
2004-05-19 20:35 ` Pat LaVarre
2004-05-19 22:19 ` Jeff Garzik
2004-05-19 22:24 ` Pat LaVarre
2004-05-19 22:27 ` Pat LaVarre
2004-05-19 22:54 ` Pat LaVarre
2004-05-21 1:58 ` Pat LaVarre
[not found] ` <6 E36A 11B-AACB-11D8-8B8A-003065635034@ieee.org>
2004-05-21 2:06 ` Pat LaVarre
2004-05-21 3:05 ` Pat LaVarre
2004-05-21 4:04 ` Jeff Garzik
[not found] ` <1 085153750.6103.33.camel@patibmrh9>
2004-05-21 15:35 ` Pat LaVarre
2004-05-21 15:46 ` Bartlomiej Zolnierkiewicz
2004-05-21 17:59 ` Pat LaVarre
2004-05-21 20:07 ` Pat LaVarre [this message]
2004-05-21 21:51 ` Jeff Garzik
2004-05-21 23:12 ` Pat LaVarre
2004-05-21 23:24 ` Pat LaVarre
2004-05-21 23:55 ` Jeff Garzik
2004-05-21 23:57 ` Pat LaVarre
2004-05-21 23:39 ` Pat LaVarre
2004-05-21 23:45 ` Jeff Garzik
2004-05-22 0:06 ` Pat LaVarre
2004-05-22 0:12 ` Pat LaVarre
2004-05-22 0:33 ` Pat LaVarre
2004-05-22 1:11 ` Pat LaVarre
2004-05-26 21:49 ` Pat LaVarre
2004-05-27 23:12 ` Pat LaVarre
2004-05-27 23:32 ` Jeff Garzik
2004-05-27 23:38 ` Pat LaVarre
2004-05-27 23:41 ` Jeff Garzik
2004-05-28 0:13 ` Pat LaVarre
2004-05-28 1:28 ` Pat LaVarre
2004-05-24 15:27 ` Pat LaVarre
2004-05-21 21:59 ` Pat LaVarre
2004-05-21 18:23 ` Danny Cox
2004-05-21 18:39 ` Bartlomiej Zolnierkiewicz
2004-05-21 18:55 ` [PATCH] kmalloc old_hwif Danny Cox
2004-05-21 19:00 ` [PATCH] atapi request sense work Danny Cox
2004-05-21 19:08 ` Bartlomiej Zolnierkiewicz
-- strict thread matches above, loose matches on Subject: below --
2004-05-21 18:45 dwm
2004-05-21 20:44 ` Pat LaVarre
2004-05-30 12:44 Pat LaVarre
2004-05-30 15:15 ` Pat LaVarre
2004-05-31 16:09 ` Pat LaVarre
2004-06-02 0:01 ` Pat LaVarre
2004-06-02 20:52 ` Pat LaVarre
2004-06-02 22:36 ` Pat LaVarre
2004-06-02 22:55 ` Jeff Garzik
2004-06-02 23:53 ` Pat LaVarre
2004-06-03 0:30 ` Pat LaVarre
2004-06-03 0:52 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1085170025.3083.91.camel@patibmrh9 \
--to=p.lavarre@ieee.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.