* [U-Boot-Users] U-Boot installation issue
@ 2004-06-18 1:47 Devraj Mukherjee
2004-06-18 9:45 ` Wolfgang Denk
0 siblings, 1 reply; 2+ messages in thread
From: Devraj Mukherjee @ 2004-06-18 1:47 UTC (permalink / raw)
To: u-boot
Hi people,
Thanks for the help so far, I have successfully managed to patch and
compile U-Boot for a Sharp LH7A400 board. Below is a listing of files
from my system (bin, srec, etc)
-rwxr-xr-x 1 root root 91692 Jun 18 09:22 u-boot.bin
-rwxr-xr-x 1 root root 275178 Jun 18 09:22 u-boot.srec
I am unable to load and run the image on the board. I tried sending the
srec file over a serial connection to the board and them jumping to that
image and that failed.
I then tried to load the .bin file as an elf file and the transfer
failed as well.
Any ideas on the problem?
Thanks in advance
Devraj
--
---------------------------------------------------------------------
System Administration Team
Eternity Technologies Pty. Ltd. P O Box 5949 Wagga Wagga 2650 NSW AUS
Phone/Fax +61-2-69717131 http://eternitytechnologies.com/
---------------------------------------------------------------------
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] U-Boot installation issue
2004-06-18 1:47 [U-Boot-Users] U-Boot installation issue Devraj Mukherjee
@ 2004-06-18 9:45 ` Wolfgang Denk
0 siblings, 0 replies; 2+ messages in thread
From: Wolfgang Denk @ 2004-06-18 9:45 UTC (permalink / raw)
To: u-boot
In message <1087523258.6017.16.camel@localhost> you wrote:
>
> Thanks for the help so far, I have successfully managed to patch and
> compile U-Boot for a Sharp LH7A400 board. Below is a listing of files
> from my system (bin, srec, etc)
I consider it discourteous or even rude that you post the same
question without cross-reference to several mailing lists (here, and
linux-arm).
> I am unable to load and run the image on the board. I tried sending the
> srec file over a serial connection to the board and them jumping to that
> image and that failed.
>
> I then tried to load the .bin file as an elf file and the transfer
> failed as well.
It would definitely help if you add some information which tools you
use for the download, i.e. are you doing this with some pre-loaded
other type of boot loader, or using a BDI200, or what?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Above all else -- sky.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-06-18 9:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-18 1:47 [U-Boot-Users] U-Boot installation issue Devraj Mukherjee
2004-06-18 9:45 ` Wolfgang Denk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.