From: "Heiko Stübner" <heiko@sntech.de>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
ezequiel@collabora.com, dafna.hirschfeld@collabora.com,
helen.koike@collabora.com, linux-rockchip@lists.infradead.org,
linux-media@vger.kernel.org, robh+dt@kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v6 0/7] rkisp1 support for px30
Date: Mon, 12 Jul 2021 22:46:26 +0200 [thread overview]
Message-ID: <10918018.2OtUDhi4od@diego> (raw)
In-Reply-To: <YOyos6b4QvLkl6//@pendragon.ideasonboard.com>
Hi Laurent,
Am Montag, 12. Juli 2021, 22:40:19 CEST schrieb Laurent Pinchart:
> Hi Heiko,
>
> On Fri, Jun 18, 2021 at 03:02:28PM +0200, Heiko Stuebner wrote:
> > This series adds support for the slightly different v12
> > variant of the ISP used for example in the px30 soc.
>
> Nice :-)
>
> How have you tested this ?
I have this running on a px30-evb with the integrated camera.
With libcamera's tools/rkisp1 script it works out of the box,
but there is also my still pending little libcamera patch to add actual
support for the changed values [0] which then even makes qcam
work nicely ;-) .
Heiko
[0] https://patchwork.libcamera.org/patch/12668/
>
> > changes in v6:
> > - camera compatible in px30 binding example (Rob's bot)
> > - move a last wrong positionen constant define (a v12 addition
> > should not be added in the v10-prefix change) (Dafna)
> > - rename size to clk_size in match-data struct (Dafna)
> >
> > changes in v5:
> > - handle interrupt-names as conditional required property (Dafna)
> > - add second example for showing interrupt-names (Dafna)
> >
> > changes in v4:
> > - clean up multi-irq case (Dafna)
> > Now each variant can have a list of interrupts
> > and their respective handlers, with or without
> > interrupt-names
> >
> > changes in v3:
> > - add necessary binding additions
> > - fix pclk naming in binding
> > - move v12 clk_ctrl register bits to v12 addition patch
> > - fix rebase artefact with hst_enable
> >
> > changes in v2 (from rfc):
> > - split out phy patch into a separate series
> > - drop dts patches for now
> > - split v12 addition and v10 prefixes into separate patches
> > to enable easier review (Dafna)
> > - remove {stats,params}_config structs, we can just use the
> > correct constant (Dafna)
> > - adapt to styling comments from Dafna and Helen
> > - add patch to remove the unused irq variable in struct rkisp
> >
> > Heiko Stuebner (10):
> > media: rockchip: rkisp1: remove unused irq variable
> > dt-bindings: media: rkisp1: fix pclk clock-name
> > dt-bindings: media: rkisp1: document different irq possibilities
> > media: rockchip: rkisp1: allow separate interrupts
> > media: rockchip: rkisp1: make some isp-param functions variable
> > media: rockchip: rkisp1: make some isp-stats functions variable
> > media: rockchip: rkisp1: add prefixes for v10 specific parts
> > media: rockchip: rkisp1: add support for v12 isp variants
> > dt-bindings: media: rkisp1: document px30 isp compatible
> > media: rockchip: rkisp1: add support for px30 isp version
> >
> > .../bindings/media/rockchip-isp1.yaml | 114 +++-
> > .../platform/rockchip/rkisp1/rkisp1-capture.c | 9 +-
> > .../platform/rockchip/rkisp1/rkisp1-common.h | 44 +-
> > .../platform/rockchip/rkisp1/rkisp1-dev.c | 81 ++-
> > .../platform/rockchip/rkisp1/rkisp1-isp.c | 29 +-
> > .../platform/rockchip/rkisp1/rkisp1-params.c | 557 ++++++++++++++----
> > .../platform/rockchip/rkisp1/rkisp1-regs.h | 406 ++++++++-----
> > .../platform/rockchip/rkisp1/rkisp1-stats.c | 107 +++-
> > 8 files changed, 1050 insertions(+), 297 deletions(-)
>
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
ezequiel@collabora.com, dafna.hirschfeld@collabora.com,
helen.koike@collabora.com, linux-rockchip@lists.infradead.org,
linux-media@vger.kernel.org, robh+dt@kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v6 0/7] rkisp1 support for px30
Date: Mon, 12 Jul 2021 22:46:26 +0200 [thread overview]
Message-ID: <10918018.2OtUDhi4od@diego> (raw)
In-Reply-To: <YOyos6b4QvLkl6//@pendragon.ideasonboard.com>
Hi Laurent,
Am Montag, 12. Juli 2021, 22:40:19 CEST schrieb Laurent Pinchart:
> Hi Heiko,
>
> On Fri, Jun 18, 2021 at 03:02:28PM +0200, Heiko Stuebner wrote:
> > This series adds support for the slightly different v12
> > variant of the ISP used for example in the px30 soc.
>
> Nice :-)
>
> How have you tested this ?
I have this running on a px30-evb with the integrated camera.
With libcamera's tools/rkisp1 script it works out of the box,
but there is also my still pending little libcamera patch to add actual
support for the changed values [0] which then even makes qcam
work nicely ;-) .
Heiko
[0] https://patchwork.libcamera.org/patch/12668/
>
> > changes in v6:
> > - camera compatible in px30 binding example (Rob's bot)
> > - move a last wrong positionen constant define (a v12 addition
> > should not be added in the v10-prefix change) (Dafna)
> > - rename size to clk_size in match-data struct (Dafna)
> >
> > changes in v5:
> > - handle interrupt-names as conditional required property (Dafna)
> > - add second example for showing interrupt-names (Dafna)
> >
> > changes in v4:
> > - clean up multi-irq case (Dafna)
> > Now each variant can have a list of interrupts
> > and their respective handlers, with or without
> > interrupt-names
> >
> > changes in v3:
> > - add necessary binding additions
> > - fix pclk naming in binding
> > - move v12 clk_ctrl register bits to v12 addition patch
> > - fix rebase artefact with hst_enable
> >
> > changes in v2 (from rfc):
> > - split out phy patch into a separate series
> > - drop dts patches for now
> > - split v12 addition and v10 prefixes into separate patches
> > to enable easier review (Dafna)
> > - remove {stats,params}_config structs, we can just use the
> > correct constant (Dafna)
> > - adapt to styling comments from Dafna and Helen
> > - add patch to remove the unused irq variable in struct rkisp
> >
> > Heiko Stuebner (10):
> > media: rockchip: rkisp1: remove unused irq variable
> > dt-bindings: media: rkisp1: fix pclk clock-name
> > dt-bindings: media: rkisp1: document different irq possibilities
> > media: rockchip: rkisp1: allow separate interrupts
> > media: rockchip: rkisp1: make some isp-param functions variable
> > media: rockchip: rkisp1: make some isp-stats functions variable
> > media: rockchip: rkisp1: add prefixes for v10 specific parts
> > media: rockchip: rkisp1: add support for v12 isp variants
> > dt-bindings: media: rkisp1: document px30 isp compatible
> > media: rockchip: rkisp1: add support for px30 isp version
> >
> > .../bindings/media/rockchip-isp1.yaml | 114 +++-
> > .../platform/rockchip/rkisp1/rkisp1-capture.c | 9 +-
> > .../platform/rockchip/rkisp1/rkisp1-common.h | 44 +-
> > .../platform/rockchip/rkisp1/rkisp1-dev.c | 81 ++-
> > .../platform/rockchip/rkisp1/rkisp1-isp.c | 29 +-
> > .../platform/rockchip/rkisp1/rkisp1-params.c | 557 ++++++++++++++----
> > .../platform/rockchip/rkisp1/rkisp1-regs.h | 406 ++++++++-----
> > .../platform/rockchip/rkisp1/rkisp1-stats.c | 107 +++-
> > 8 files changed, 1050 insertions(+), 297 deletions(-)
>
>
next prev parent reply other threads:[~2021-07-12 20:46 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-18 13:02 [PATCH v6 0/7] rkisp1 support for px30 Heiko Stuebner
2021-06-18 13:02 ` Heiko Stuebner
2021-06-18 13:02 ` [PATCH v6 01/10] media: rockchip: rkisp1: remove unused irq variable Heiko Stuebner
2021-06-18 13:02 ` Heiko Stuebner
2021-06-18 13:02 ` [PATCH v6 02/10] dt-bindings: media: rkisp1: fix pclk clock-name Heiko Stuebner
2021-06-18 13:02 ` Heiko Stuebner
2021-07-12 20:04 ` Rob Herring
2021-07-12 20:04 ` Rob Herring
2021-06-18 13:02 ` [PATCH v6 03/10] dt-bindings: media: rkisp1: document different irq possibilities Heiko Stuebner
2021-06-18 13:02 ` Heiko Stuebner
2021-07-12 20:05 ` Rob Herring
2021-07-12 20:05 ` Rob Herring
2021-06-18 13:02 ` [PATCH v6 04/10] media: rockchip: rkisp1: allow separate interrupts Heiko Stuebner
2021-06-18 13:02 ` Heiko Stuebner
2021-06-18 13:02 ` [PATCH v6 05/10] media: rockchip: rkisp1: make some isp-param functions variable Heiko Stuebner
2021-06-18 13:02 ` Heiko Stuebner
2021-06-20 7:21 ` Dafna Hirschfeld
2021-06-20 7:21 ` Dafna Hirschfeld
2021-07-12 20:43 ` Laurent Pinchart
2021-07-12 20:43 ` Laurent Pinchart
2021-06-18 13:02 ` [PATCH v6 06/10] media: rockchip: rkisp1: make some isp-stats " Heiko Stuebner
2021-06-18 13:02 ` Heiko Stuebner
2021-06-20 7:22 ` Dafna Hirschfeld
2021-06-20 7:22 ` Dafna Hirschfeld
2021-07-12 20:44 ` Laurent Pinchart
2021-07-12 20:44 ` Laurent Pinchart
2021-06-18 13:02 ` [PATCH v6 07/10] media: rockchip: rkisp1: add prefixes for v10 specific parts Heiko Stuebner
2021-06-18 13:02 ` Heiko Stuebner
2021-06-18 13:02 ` [PATCH v6 08/10] media: rockchip: rkisp1: add support for v12 isp variants Heiko Stuebner
2021-06-18 13:02 ` Heiko Stuebner
2021-06-20 7:26 ` Dafna Hirschfeld
2021-06-20 7:26 ` Dafna Hirschfeld
2021-07-12 20:47 ` Laurent Pinchart
2021-07-12 20:47 ` Laurent Pinchart
2021-06-18 13:02 ` [PATCH v6 09/10] dt-bindings: media: rkisp1: document px30 isp compatible Heiko Stuebner
2021-06-18 13:02 ` Heiko Stuebner
2021-07-12 20:06 ` Rob Herring
2021-07-12 20:06 ` Rob Herring
2021-06-18 13:02 ` [PATCH v6 10/10] media: rockchip: rkisp1: add support for px30 isp version Heiko Stuebner
2021-06-18 13:02 ` Heiko Stuebner
2021-07-12 20:40 ` [PATCH v6 0/7] rkisp1 support for px30 Laurent Pinchart
2021-07-12 20:40 ` Laurent Pinchart
2021-07-12 20:46 ` Heiko Stübner [this message]
2021-07-12 20:46 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10918018.2OtUDhi4od@diego \
--to=heiko@sntech.de \
--cc=dafna.hirschfeld@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@collabora.com \
--cc=helen.koike@collabora.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.