Re: 2.6.8.1-mm1 hangs on boot with ACPI

Re: 2.6.8.1-mm1 hangs on boot with ACPI

[Len Brown]

On Tue, 2004-08-17 at 04:55, Pontus Fuchs wrote:
> Hi,
> 
> After upgrading to 2.6.8.1-mm1 from plain 2.6.8.1 my machine does not
> boot anymore. The last message i see is:
> 
> ACPI: Processor [CPU0] (supports C1,C2,C3, 8 throttling states)
> 
> In plain 2.6.8.1 the next messages would be:
> 
> ACPI: Thermal Zone [THRM] (52 C)
> Console: switching to colour frame buffer device 175x65
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected SiS 648 chipset
> 
> Booting with acpi=off works fine. I have also tried pci=routeirq but
> it
> does not make any difference.
> 
> The machine is an Asus L5c laptop.

Please try booting with "pci=routeirq"
If that doesn't work, please take stock 2.6.8.1 and apply the latest
patch here:
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.8/
and give it a go.

This will bring your kernel up to the same ACPI patch that is in the -mm
tree, but without all the other stuff in the mm tree.

If it fails, then ACPI broke.  If it works, then something in -mm broke
ACPI.

thanks,
-Len

Re: 2.6.8.1-mm1 hangs on boot with ACPI

[Pontus Fuchs]

On Thu, 2004-08-19 at 08:49, Len Brown wrote:
> > After upgrading to 2.6.8.1-mm1 from plain 2.6.8.1 my machine does not
> > boot anymore. The last message i see is:
> > 
> > ACPI: Processor [CPU0] (supports C1,C2,C3, 8 throttling states)
> > 
> > In plain 2.6.8.1 the next messages would be:
> > 
> > ACPI: Thermal Zone [THRM] (52 C)
> > Console: switching to colour frame buffer device 175x65
> > Linux agpgart interface v0.100 (c) Dave Jones
> > agpgart: Detected SiS 648 chipset
> > 
> > Booting with acpi=off works fine. I have also tried pci=routeirq but
> > it
> > does not make any difference.
> > 
> > The machine is an Asus L5c laptop.
> 
> Please try booting with "pci=routeirq"
> If that doesn't work, please take stock 2.6.8.1 and apply the latest
> patch here:
> http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.8/
> and give it a go.
> 
> This will bring your kernel up to the same ACPI patch that is in the -mm
> tree, but without all the other stuff in the mm tree.
> 
> If it fails, then ACPI broke.  If it works, then something in -mm broke
> ACPI.

Hi,

I did what you suggested but the kernel still hangs. I have put the
details on bugme.osdl.org:

http://bugme.osdl.org/show_bug.cgi?id=3233

Pontus Fuchs

Re: [ACPI] Re: 2.6.8.1-mm1 hangs on boot with ACPI

[Eric Valette]

Pontus Fuchs wrote:
> On Thu, 2004-08-19 at 08:49, Len Brown wrote:
> 
>>>After upgrading to 2.6.8.1-mm1 from plain 2.6.8.1 my machine does not
>>>boot anymore. The last message i see is:
>>>
>>>ACPI: Processor [CPU0] (supports C1,C2,C3, 8 throttling states)
>>>
>>>In plain 2.6.8.1 the next messages would be:
>>>
>>>ACPI: Thermal Zone [THRM] (52 C)
>>>Console: switching to colour frame buffer device 175x65
>>>Linux agpgart interface v0.100 (c) Dave Jones
>>>agpgart: Detected SiS 648 chipset
>>>
>>>Booting with acpi=off works fine. I have also tried pci=routeirq but
>>>it
>>>does not make any difference.
>>>
>>>The machine is an Asus L5c laptop.
>>
>>Please try booting with "pci=routeirq"
>>If that doesn't work, please take stock 2.6.8.1 and apply the latest
>>patch here:
>>http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.8/
>>and give it a go.
>>
>>This will bring your kernel up to the same ACPI patch that is in the -mm
>>tree, but without all the other stuff in the mm tree.
>>
>>If it fails, then ACPI broke.  If it works, then something in -mm broke
>>ACPI.
> 
> 
> Hi,
> 
> I did what you suggested but the kernel still hangs. I have put the
> details on bugme.osdl.org:
> 
> http://bugme.osdl.org/show_bug.cgi?id=3233
> 
> Pontus Fuchs

Could you try the patch included in 
<http://bugme.osdl.org/show_bug.cgi?id=3191> as it fixes my L3C and the 
analysis of the problem may well lead to an ACPI crash...



-- 
    __
   /  `                   	Eric Valette
  /--   __  o _.          	6 rue Paul Le Flem
(___, / (_(_(__         	35740 Pace

Tel: +33 (0)2 99 85 26 76	Fax: +33 (0)2 99 85 26 76
E-mail: eric.valette@free.fr

Re: Re: 2.6.8.1-mm1 hangs on boot with ACPI

[Pontus Fuchs]

On Thu, 2004-08-19 at 10:26, Eric Valette wrote:
> Pontus Fuchs wrote:
> > On Thu, 2004-08-19 at 08:49, Len Brown wrote:
> > 
> >>>After upgrading to 2.6.8.1-mm1 from plain 2.6.8.1 my machine does not
> >>>boot anymore. The last message i see is:
> >>>
> >>>ACPI: Processor [CPU0] (supports C1,C2,C3, 8 throttling states)
> >>>
> >>>In plain 2.6.8.1 the next messages would be:
> >>>
> >>>ACPI: Thermal Zone [THRM] (52 C)
> >>>Console: switching to colour frame buffer device 175x65
> >>>Linux agpgart interface v0.100 (c) Dave Jones
> >>>agpgart: Detected SiS 648 chipset
> >>>
> >>>Booting with acpi=off works fine. I have also tried pci=routeirq but
> >>>it
> >>>does not make any difference.
> >>>
> >>>The machine is an Asus L5c laptop.
> >>
> >>Please try booting with "pci=routeirq"
> >>If that doesn't work, please take stock 2.6.8.1 and apply the latest
> >>patch here:
> >>http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.8/
> >>and give it a go.
> >>
> >>This will bring your kernel up to the same ACPI patch that is in the -mm
> >>tree, but without all the other stuff in the mm tree.
> >>
> >>If it fails, then ACPI broke.  If it works, then something in -mm broke
> >>ACPI.
> > 
> > 
> > Hi,
> > 
> > I did what you suggested but the kernel still hangs. I have put the
> > details on bugme.osdl.org:
> > 
> > http://bugme.osdl.org/show_bug.cgi?id=3233
> > 
> > Pontus Fuchs
> 
> Could you try the patch included in 
> <http://bugme.osdl.org/show_bug.cgi?id=3191> as it fixes my L3C and the 
> analysis of the problem may well lead to an ACPI crash...

Hi,

I cannot see how this should help. The L3C has an Intel chipset and the
L5C has a SIS chipset, and that patch changes the PCI quirks for some
intel chipset.

Pontus




-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285

Re: 2.6.8.1-mm1 hangs on boot with ACPI

[Pontus Fuchs]

On Thu, 2004-08-19 at 08:49, Len Brown wrote:
> On Tue, 2004-08-17 at 04:55, Pontus Fuchs wrote:
> > Hi,
> > 
> > After upgrading to 2.6.8.1-mm1 from plain 2.6.8.1 my machine does not
> > boot anymore. The last message i see is:
> > 
> > ACPI: Processor [CPU0] (supports C1,C2,C3, 8 throttling states)
> > 
> > In plain 2.6.8.1 the next messages would be:
> > 
> > ACPI: Thermal Zone [THRM] (52 C)
> > Console: switching to colour frame buffer device 175x65
> > Linux agpgart interface v0.100 (c) Dave Jones
> > agpgart: Detected SiS 648 chipset
> > 
> > Booting with acpi=off works fine. I have also tried pci=routeirq but
> > it
> > does not make any difference.
> > 
> > The machine is an Asus L5c laptop.
> 
> Please try booting with "pci=routeirq"
> If that doesn't work, please take stock 2.6.8.1 and apply the latest
> patch here:
> http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.8/
> and give it a go.
> 
> This will bring your kernel up to the same ACPI patch that is in the -mm
> tree, but without all the other stuff in the mm tree.
> 
> If it fails, then ACPI broke.  If it works, then something in -mm broke
> ACPI.

Hi,

I found this another Asus laptop with intel chipset which also has
problems with the latest ACPI code, and I tried the same trick on my
machine, and now the machine boots again! 

http://bugme.osdl.org/show_bug.cgi?id=3191

I have no clue what I'm actually doing so please don't consider the
patch a fix for the problem, but rather a way do show how to make the
symptom go away.

--- quirks.c.bak        2004-08-19 13:25:23.000000000 +0200
+++ quirks.c    2004-08-19 13:25:47.000000000 +0200
@@ -756,11 +756,13 @@
  */
 static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
 {
+/*
	u8 val = 0;
	printk(KERN_INFO "Enabling SiS 96x SMBus.\n");
	pci_read_config_byte(dev, 0x77, &val);
	pci_write_config_byte(dev, 0x77, val & ~0x10);
	pci_read_config_byte(dev, 0x77, &val);
+*/
 }

Pontus

Re: [ACPI] Re: 2.6.8.1-mm1 hangs on boot with ACPI

[Eric Valette]

Pontus Fuchs wrote:
> On Thu, 2004-08-19 at 08:49, Len Brown wrote:
> 
>>On Tue, 2004-08-17 at 04:55, Pontus Fuchs wrote:
>>
>>>Hi,
>>>
>>>After upgrading to 2.6.8.1-mm1 from plain 2.6.8.1 my machine does not
>>>boot anymore. The last message i see is:
>>>
>>>ACPI: Processor [CPU0] (supports C1,C2,C3, 8 throttling states)
>>>
>>>In plain 2.6.8.1 the next messages would be:
>>>
>>>ACPI: Thermal Zone [THRM] (52 C)
>>>Console: switching to colour frame buffer device 175x65
>>>Linux agpgart interface v0.100 (c) Dave Jones
>>>agpgart: Detected SiS 648 chipset
>>>
>>>Booting with acpi=off works fine. I have also tried pci=routeirq but
>>>it
>>>does not make any difference.
>>>
>>>The machine is an Asus L5c laptop.
>>
>>Please try booting with "pci=routeirq"
>>If that doesn't work, please take stock 2.6.8.1 and apply the latest
>>patch here:
>>http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.8/
>>and give it a go.
>>
>>This will bring your kernel up to the same ACPI patch that is in the -mm
>>tree, but without all the other stuff in the mm tree.
>>
>>If it fails, then ACPI broke.  If it works, then something in -mm broke
>>ACPI.
> 
> 
> Hi,
> 
> I found this another Asus laptop with intel chipset which also has
> problems with the latest ACPI code, and I tried the same trick on my
> machine, and now the machine boots again! 
> 
> http://bugme.osdl.org/show_bug.cgi?id=3191
> 
> I have no clue what I'm actually doing so please don't consider the
> patch a fix for the problem, but rather a way do show how to make the
> symptom go away.
> 
> --- quirks.c.bak        2004-08-19 13:25:23.000000000 +0200
> +++ quirks.c    2004-08-19 13:25:47.000000000 +0200
> @@ -756,11 +756,13 @@
>   */
>  static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
>  {
> +/*
> 	u8 val = 0;
> 	printk(KERN_INFO "Enabling SiS 96x SMBus.\n");
> 	pci_read_config_byte(dev, 0x77, &val);
> 	pci_write_config_byte(dev, 0x77, val & ~0x10);
> 	pci_read_config_byte(dev, 0x77, &val);
> +*/
>  }

Well the problem is not really in the ACPI code, but rather in the PCI 
code that tries to inconditionnaly enable SMBus and thus PCI devices 
without _also_ honoring the firmware configured IO port regions for the 
devices it just enabled. Thus, when ACPI use the DTST to also map the 
same IO ports regions  that obviously assume the default firmware value, 
ACPI fails.

Current victimcs are :
	- Asus L3C, L5C users,
	- Probably any user of pci quirk.c code that enables the SMbus...

On the L3C at least, the code to enable the SMBus works perfectly, the 
firmware configured value for the IO region is coherent with what the 
DTST contains but the PCI code change PCI configuration space default 
value and thus breaks ACPI...

-- 
    __
   /  `                   	Eric Valette
  /--   __  o _.          	6 rue Paul Le Flem
(___, / (_(_(__         	35740 Pace

Tel: +33 (0)2 99 85 26 76	Fax: +33 (0)2 99 85 26 76
E-mail: eric.valette@free.fr

2.6.8.1-mm1 hangs on boot with ACPI

[Pontus Fuchs]

Hi,

After upgrading to 2.6.8.1-mm1 from plain 2.6.8.1 my machine does not
boot anymore. The last message i see is:

ACPI: Processor [CPU0] (supports C1,C2,C3, 8 throttling states)

In plain 2.6.8.1 the next messages would be:

ACPI: Thermal Zone [THRM] (52 C)
Console: switching to colour frame buffer device 175x65
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 648 chipset

Booting with acpi=off works fine. I have also tried pci=routeirq but it
does not make any difference.

The machine is an Asus L5c laptop.

Please CC me, as I'm not subscribing to this list.

Pontus