* How to classify this packets into correct mangle table?
@ 2005-01-21 17:13 Rio Martin
0 siblings, 0 replies; 2+ messages in thread
From: Rio Martin @ 2005-01-21 17:13 UTC (permalink / raw)
To: netfilter
Dear all,
I am so confuse classifying the correct packets into mangle table.
Here i describe the situation.
LAN ---- :eth1 [ LINUX-BOX ] eth0: ---- INTERNET
eth0 220.1.1.1
eth0:1 192.168.1.1
eth0:2 192.168.1.2
eth1 10.10.10.1 [network 10.10.10.0/24]
I ve those two private IP aliases in eth0 and those get NATed to 220.1.1.1
before reaching the internet.
I need to shape those two IPs in TC, but i am confuse how to classify it on
mangle table. I need to shape the incoming and outgoing packets from those
two IPs.
Need help, thanks ..
Regards,
Rio Martin.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: How to classify this packets into correct mangle table?
@ 2005-01-21 17:55 Rio Martin
0 siblings, 0 replies; 2+ messages in thread
From: Rio Martin @ 2005-01-21 17:55 UTC (permalink / raw)
To: netfilter
--- Samuel =?iso-8859-1?B?RO1heiBHYXJj7WE=?= <samueldg@arcoscom.com> wrote:
> What's do you need?
> Shape the incoming traffic from 192.x subnet? Shape the outgoing traffic >
to
> 192.x subnet? Only shape from/to internet these subnets? Explain a bit.
I need both outgoing and incoming.
Yes, i ve tried with IMQ but failed, because if i set PREROUTING -i eth0, it
only recognize my public IP, not 192.168.1.x
There are no packets flowing directly to 192.168.1.x coming from the
internet. That because those IP have been set to be NATed to my public IP
before leaving out the interface linked to the internet (eth0).
Regards,
Rio Martin.
> > Dear all,
> > I am so confuse classifying the correct packets into mangle table.
> > Here i describe the situation.
> >
> > LAN ---- :eth1 [ LINUX-BOX ] eth0: ---- INTERNET
> > eth0 220.1.1.1
> > eth0:1 192.168.1.1
> > eth0:2 192.168.1.2
> > eth1 10.10.10.1 [network 10.10.10.0/24]
> >
> > I ve those two private IP aliases in eth0 and those get NATed to 220.1.>
1.1
> > before reaching the internet.
> >
> > I need to shape those two IPs in TC, but i am confuse how to classify i>
t on
> > mangle table. I need to shape the incoming and outgoing packets from th>
ose
> > two IPs.
> >
> > Need help, thanks ..
> >
> > Regards,
> > Rio Martin.
> >
> >
>
>
>
> Samuel Díaz García
> Director Gerente
> ArcosCom Wireless, S.L.L.
>
> mailto:samueldg@arcoscom.com
> http://www.arcoscom.com
> móvil: 651 93 72 48
> tlfn/fax: 956 70 13 15
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-01-21 17:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-21 17:55 How to classify this packets into correct mangle table? Rio Martin
-- strict thread matches above, loose matches on Subject: below --
2005-01-21 17:13 Rio Martin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.