From: Lee Revell <rlrevell@joe-job.com>
To: uaca@alumni.uv.es
Cc: linux-kernel@vger.kernel.org, Tomas Szepe <szepe@pinerecords.com>,
alsa-devel <alsa-devel@lists.sourceforge.net>
Subject: Re: intel8x0: no sound in 2.6.11 rc3 & 4 (fine with 2.6.10)
Date: Sat, 19 Feb 2005 15:30:18 -0500 [thread overview]
Message-ID: <1108845018.10705.19.camel@krustophenia.net> (raw)
In-Reply-To: <20050219121157.GA14437@pusa.informat.uv.es>
Please cc: alsa-devel when reporting ALSA issues.
Lee
On Sat, 2005-02-19 at 13:11 +0100, uaca@alumni.uv.es wrote:
> Hello
>
> I have read a post in lkml.org that states that the problem experienced in
> rc3 has gone (1). That is not the case for me.
>
> My audio device is
>
> 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
> Subsystem: IBM: Unknown device 0554
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 11
> Region 0: I/O ports at 1c00 [size=256]
> Region 1: I/O ports at 18c0 [size=64]
> Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512]
> Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> In 2.6.10 and in 2.6.11-rc3 & 4 the clock is set to 48khz.
>
> eg:
>
> intel8x0_measure_ac97_clock: measured 49502 usecs
> intel8x0: clocking to 48000
>
> It uses an Analog Devices AD1981B
>
> I have put a tar file of the /proc/asound directory of 2.6.10 and 2.6.11-rc4 in
>
> http://pusa.uv.es/~ulisses/asound-intel8x0/
>
> the tar files were done while playing pcm audio, (not being eard in rc4).
>
> I have found that I had to Mute __both__ "Headphone Jack Sense" and
> "Line Jack Sense" in order to ear the audio in rc4.
>
> Please let me know if you need further info or you want a tester
>
> All this is on a IBM Thinkpad R51 - Type 2887 -AVG
>
> (tot toc: IBM, we're buying your laptops too)
>
> Thanks in advance
>
> Ulisses
>
> (1) http://lkml.org/lkml/2005/2/18/93
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
WARNING: multiple messages have this Message-ID (diff)
From: Lee Revell <rlrevell@joe-job.com>
To: uaca@alumni.uv.es
Cc: linux-kernel@vger.kernel.org, Tomas Szepe <szepe@pinerecords.com>,
alsa-devel <alsa-devel@lists.sourceforge.net>
Subject: Re: intel8x0: no sound in 2.6.11 rc3 & 4 (fine with 2.6.10)
Date: Sat, 19 Feb 2005 15:30:18 -0500 [thread overview]
Message-ID: <1108845018.10705.19.camel@krustophenia.net> (raw)
In-Reply-To: <20050219121157.GA14437@pusa.informat.uv.es>
Please cc: alsa-devel when reporting ALSA issues.
Lee
On Sat, 2005-02-19 at 13:11 +0100, uaca@alumni.uv.es wrote:
> Hello
>
> I have read a post in lkml.org that states that the problem experienced in
> rc3 has gone (1). That is not the case for me.
>
> My audio device is
>
> 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
> Subsystem: IBM: Unknown device 0554
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 11
> Region 0: I/O ports at 1c00 [size=256]
> Region 1: I/O ports at 18c0 [size=64]
> Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512]
> Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> In 2.6.10 and in 2.6.11-rc3 & 4 the clock is set to 48khz.
>
> eg:
>
> intel8x0_measure_ac97_clock: measured 49502 usecs
> intel8x0: clocking to 48000
>
> It uses an Analog Devices AD1981B
>
> I have put a tar file of the /proc/asound directory of 2.6.10 and 2.6.11-rc4 in
>
> http://pusa.uv.es/~ulisses/asound-intel8x0/
>
> the tar files were done while playing pcm audio, (not being eard in rc4).
>
> I have found that I had to Mute __both__ "Headphone Jack Sense" and
> "Line Jack Sense" in order to ear the audio in rc4.
>
> Please let me know if you need further info or you want a tester
>
> All this is on a IBM Thinkpad R51 - Type 2887 -AVG
>
> (tot toc: IBM, we're buying your laptops too)
>
> Thanks in advance
>
> Ulisses
>
> (1) http://lkml.org/lkml/2005/2/18/93
next prev parent reply other threads:[~2005-02-19 20:30 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-19 12:11 intel8x0: no sound in 2.6.11 rc3 & 4 (fine with 2.6.10) uaca
2005-02-19 20:30 ` Lee Revell [this message]
2005-02-19 20:30 ` Lee Revell
2005-02-22 13:23 ` Takashi Iwai
2005-02-23 19:31 ` Bill Davidsen
2005-02-23 19:48 ` Nish Aravamudan
-- strict thread matches above, loose matches on Subject: below --
2005-02-19 21:23 intel8x0: no sound in 2.6.11 rc3 & 4 (fine with 2.6.10)] uaca
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1108845018.10705.19.camel@krustophenia.net \
--to=rlrevell@joe-job.com \
--cc=alsa-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=szepe@pinerecords.com \
--cc=uaca@alumni.uv.es \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.