Re: Prism54 -- error loading firmware

[Kay Sievers <kay.sievers@vrfy.org>]

[-- Attachment #1: Type: text/plain, Size: 988 bytes --]

On Thu, 2005-03-10 at 22:51 -0800, Jim Gifford wrote:
> Everytime I try to get the firmware to load for my prism54 based card I 
> get the following error messages.
> 
> Loaded prism54 driver, version 1.2
> ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
> eth0: resetting device...
> eth0: uploading firmware...
> prism54: request_firmware() failed for 'isl3890'
> eth0: could not upload firmware ('isl3890')
> eth0: islpci_reset: failure
> 
> I have made sure the directory specified in firmware.agent is correct. 
> /lib/firmware
> 
> I have placed the firmware into that directory.
> 
> I'm using a LFS 6.x based system, with udev 054, hotplug 9_23, and 
> 2.6.11.2 kernel.

What does:
  cat /proc/sys/kernel/hotplug

print?

Please record the hotplug event timing with the attached script, by
placing it as:
  /etc/hotplug.d/default/00-log.hotplug

And post the corresponding timestamps from syslog too, while loading the
module that requests the firmware.

Kay

[-- Attachment #2: 00-log.hotplug --]
[-- Type: application/x-shellscript, Size: 140 bytes --]