From: Jim Gifford <maillist@jg555.com>
To: linux-hotplug@vger.kernel.org
Subject: Re: Prism54 -- error loading firmware
Date: Fri, 11 Mar 2005 09:17:24 +0000 [thread overview]
Message-ID: <42316224.8050001@jg555.com> (raw)
In-Reply-To: <42313FDA.8050402@jg555.com>
Kay Sievers wrote:
>What does:
> cat /proc/sys/kernel/hotplug
>
>print?
>
>
>
/sbin/hotplug
>Please record the hotplug event timing with the attached script, by
>placing it as:
> /etc/hotplug.d/default/00-log.hotplug
>
>And post the corresponding timestamps from syslog too, while loading the
>module that requests the firmware.
>
>Kay
>
>
From syslog
Mar 11 01:04:19 laptop Loaded prism54 driver, version 1.2
Mar 11 01:04:19 laptop PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Mar 11 01:04:19 laptop ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11
(level, low) -> IRQ 11
Mar 11 01:04:37 laptop eth0: resetting device...
Mar 11 01:04:37 laptop eth0: uploading firmware...
Mar 11 01:04:47 laptop prism54: request_firmware() failed for 'isl3890'
Mar 11 01:04:47 laptop eth0: could not upload firmware ('isl3890')
Mar 11 01:04:47 laptop eth0: islpci_reset: failure
Mar 11 01:04:54 laptop eth0: hot unplug detected
Mar 11 01:04:54 laptop eth0: removing device
from events
HOTPLUG_TIME='Fri Mar 11 01:02:48 PST 2005'
SUBSYSTEM=module
HOTPLUG_ARGSDEVPATH=/module/firmware_class
HOTPLUG_TYPE=module
ACTIONd
SEQNUM88
HOTPLUG_TIME='Fri Mar 11 01:02:48 PST 2005'
SUBSYSTEM=class
HOTPLUG_ARGSDEVPATH=/class/firmware
HOTPLUG_TYPE=class
ACTIONd
SEQNUM89
HOTPLUG_TIME='Fri Mar 11 01:02:48 PST 2005'
SUBSYSTEM=module
HOTPLUG_ARGSDEVPATH=/module/prism54
HOTPLUG_TYPE=module
ACTIONd
SEQNUM90
HOTPLUG_TIME='Fri Mar 11 01:02:48 PST 2005'
SUBSYSTEM=drivers
HOTPLUG_ARGSDEVPATH=/bus/pci/drivers/prism54
HOTPLUG_TYPE=drivers
ACTIONd
SEQNUM91
from hotplug_d.log
--------415--------
1110532073 remove /class/net/eth0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=net DEVPATH=/class/net/eth0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=remove _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER<59x INTERFACE=eth0 PHYSDEVBUS=pci SEQNUMA5
--------415--------
--------416--------
1110532073 remove /devices/pci0000:00/0000:00:0a.0/0000:02:00.0
PCI_SLOT_NAME\000:02:00.0 PCI_ID\x10B7:5257 SUBSYSTEM=pci DEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=remove _=/usr/bin/env PWD=/ PCI_SUBSYS_ID\x10B7:5C57 HOME=/ SHLVL=2 PHYSDEVBUS=pci PCI_CLASS 000 SEQNUMA6
--------416--------
--------417--------
1110532082 add /devices/pci0000:00/0000:00:0a.0/0000:02:00.0
PCI_SLOT_NAME\000:02:00.0 PCI_ID\x1260:3890 SUBSYSTEM=pci DEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTIONd _=/usr/bin/env PWD=/ PCI_SUBSYS_ID\x10B8:2835 HOME=/ SHLVL=2 PHYSDEVBUS=pci PCI_CLASS(000 SEQNUMA7
--------417--------
--------418--------
1110532082 add /class/net/eth0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=net DEVPATH=/class/net/eth0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTIONd _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER=prism54 INTERFACE=eth0 PHYSDEVBUS=pci SEQNUMA8
--------418--------
--------419--------
1110532093 add /class/firmware/0000:02:00.0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=firmware DEVPATH=/class/firmware/0000:02:00.0 FIRMWARE=isl3890 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTIONd _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER=prism54 PHYSDEVBUS=pci SEQNUMA9
--------419--------
--------420--------
1110532103 remove /class/firmware/0000:02:00.0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=firmware DEVPATH=/class/firmware/0000:02:00.0 FIRMWARE=isl3890 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=remove _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER=prism54 PHYSDEVBUS=pci SEQNUMB0
--------420--------
--------422--------
1110532119 remove /devices/pci0000:00/0000:00:0a.0/0000:02:00.0
PCI_SLOT_NAME\000:02:00.0 PCI_ID\x1260:3890 SUBSYSTEM=pci DEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=remove _=/usr/bin/env PWD=/ PCI_SUBSYS_ID\x10B8:2835 HOME=/ SHLVL=2 PHYSDEVBUS=pci PCI_CLASS(000 SEQNUMB2
--------422--------
--------421--------
1110532119 remove /class/net/eth0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=net DEVPATH=/class/net/eth0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=remove _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER=prism54 INTERFACE=eth0 PHYSDEVBUS=pci SEQNUMB1
--------421--------
--------423--------
1110532324 add /devices/pci0000:00/0000:00:0a.0/0000:02:00.0
PCI_SLOT_NAME\000:02:00.0 PCI_ID\x10B7:5257 SUBSYSTEM=pci DEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTIONd _=/usr/bin/env PWD=/ PCI_SUBSYS_ID\x10B7:5C57 HOME=/ SHLVL=2 PHYSDEVBUS=pci PCI_CLASS 000 SEQNUMB3
--------423--------
--------424--------
1110532324 add /class/net/eth0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=net DEVPATH=/class/net/eth0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTIONd _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER<59x INTERFACE=eth0 PHYSDEVBUS=pci SEQNUMB4
--------424--------
--
----
Jim Gifford
maillist@jg555.com
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
next prev parent reply other threads:[~2005-03-11 9:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-11 6:51 Prism54 -- error loading firmware Jim Gifford
2005-03-11 7:38 ` Stefan Schweizer
2005-03-11 7:42 ` Jim Gifford
2005-03-11 8:12 ` Kay Sievers
2005-03-11 9:17 ` Jim Gifford [this message]
2005-03-11 9:40 ` Kay Sievers
2005-03-11 16:04 ` Jim Gifford
2005-03-11 18:36 ` Jim Gifford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42316224.8050001@jg555.com \
--to=maillist@jg555.com \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.