[Bluez-devel] hcitool scan while hidd connection..

[Bluez-devel] hcitool scan while hidd connection..

[Michael Frey]

I just upgraded to using 2.15 utils and libs on my system.

Now when I have a hidd connection I can no longer do an hcitool scan.

I was able to with an older version.  If I kill the hidd connection I 
am then able to scan again.

Is this intended behavior?


Michael



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] hcitool scan while hidd connection..

[Marcel Holtmann]

Hi Michael,

> I just upgraded to using 2.15 utils and libs on my system.
> 
> Now when I have a hidd connection I can no longer do an hcitool scan.
> 
> I was able to with an older version.  If I kill the hidd connection I 
> am then able to scan again.
> 
> Is this intended behavior?

I don't think so, because this is a chip feature and not a BlueZ
feature. What does "hcidump -X -V" says when you try to scan?

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] hcitool scan while hidd connection..

[Michael Frey]

Marcel,

Here is the dump when trying to scan while a dvice is connected.

root@(none):~# hcitool scan
Scanning ...
< HCI Command: Inquiry (0x01|0x0001) plen 5
   0000: 33 8b 9e 08 64                                    3...d
 > HCI Event: Command Status (0x0f) plen 4
   0000: 00 07 01 04                                       ....
 > HCI Event: Inquiry Complete (0x01) plen 1
   0000: 00                                                .
 > HCI Event: Command Status (0x0f) plen 4
   0000: 00 08 00 00                                       ....

Does this give you any clue?

Michael

On Apr 15, 2005, at 7:22 PM, Marcel Holtmann wrote:

> hcidump -X -V



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] hcitool scan while hidd connection..

[Marcel Holtmann]

Hi Michael,

> Here is the dump when trying to scan while a dvice is connected.
> 
> root@(none):~# hcitool scan
> Scanning ...
> < HCI Command: Inquiry (0x01|0x0001) plen 5
>    0000: 33 8b 9e 08 64                                    3...d
>  > HCI Event: Command Status (0x0f) plen 4
>    0000: 00 07 01 04                                       ....
>  > HCI Event: Inquiry Complete (0x01) plen 1
>    0000: 00                                                .
>  > HCI Event: Command Status (0x0f) plen 4
>    0000: 00 08 00 00                                       ....
> 
> Does this give you any clue?

install the latest hcidump, because I need the verbose decoding of the
HCI commands and events.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] hcitool scan while hidd connection..

[Michael Frey]

Marcel,
ok -- new output

root@(none):~# hcitool scan
Scanning ...
< HCI Command: Inquiry (0x01|0x0001) plen 5
     lap 0x9e8b33 len 8 num 100
 > HCI Event: Command Status (0x0f) plen 4
     Inquiry (0x01|0x0001) status 0x00 ncmd 7
 > HCI Event: Inquiry Complete (0x01) plen 1
     status 0x00
 > HCI Event: Command Status (0x0f) plen 4
     Unknown (0x00|0x0000) status 0x00 ncmd 8
root@(none):~#


Michael

On Apr 18, 2005, at 11:07 AM, Marcel Holtmann wrote:

> Hi Michael,
>
>> Here is the dump when trying to scan while a dvice is connected.
>>
>> root@(none):~# hcitool scan
>> Scanning ...
>> < HCI Command: Inquiry (0x01|0x0001) plen 5
>>    0000: 33 8b 9e 08 64                                    3...d
>>> HCI Event: Command Status (0x0f) plen 4
>>    0000: 00 07 01 04                                       ....
>>> HCI Event: Inquiry Complete (0x01) plen 1
>>    0000: 00                                                .
>>> HCI Event: Command Status (0x0f) plen 4
>>    0000: 00 08 00 00                                       ....
>>
>> Does this give you any clue?
>
> install the latest hcidump, because I need the verbose decoding of the
> HCI commands and events.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real 
> users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] hcitool scan while hidd connection..

[Marcel Holtmann]

Hi Michael,

> root@(none):~# hcitool scan
> Scanning ...
> < HCI Command: Inquiry (0x01|0x0001) plen 5
>      lap 0x9e8b33 len 8 num 100
>  > HCI Event: Command Status (0x0f) plen 4
>      Inquiry (0x01|0x0001) status 0x00 ncmd 7
>  > HCI Event: Inquiry Complete (0x01) plen 1
>      status 0x00
>  > HCI Event: Command Status (0x0f) plen 4
>      Unknown (0x00|0x0000) status 0x00 ncmd 8
> root@(none):~#

this is weird. What does "hciconfig -a" tells you about your dongle?

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] hcitool scan while hidd connection..

[Michael Frey]

Marcel,

hci0:   Type: UART
         BD Address: 00:80:37:21:49:71 ACL MTU: 672:8 SCO MTU: 64:0
         UP RUNNING PSCAN ISCAN
         RX bytes:43024 acl:1533 sco:0 events:835 errors:0
         TX bytes:11573 acl:467 sco:0 commands:103 errors:0
         Features: 0xff 0xfb 0x01 0x00 0x00 0x00 0x00 0x00
         Packet type: DM1 DH1 HV1
         Link policy: HOLD SNIFF PARK
         Link mode: SLAVE ACCEPT
         Name: 'Pad2 ((none))'
         Class: 0x000100
         Service Classes: Unspecified
         Device Class: Computer, Uncategorized
         HCI Ver: 1.1 (0x1) HCI Rev: 0x8105 LMP Ver: 1.1 (0x1) LMP 
Subver: 0x8d40
         Manufacturer: Ericsson Technology Licensing (0)

Michael

On Apr 18, 2005, at 11:35 AM, Marcel Holtmann wrote:

> Hi Michael,
>
>> root@(none):~# hcitool scan
>> Scanning ...
>> < HCI Command: Inquiry (0x01|0x0001) plen 5
>>      lap 0x9e8b33 len 8 num 100
>>> HCI Event: Command Status (0x0f) plen 4
>>      Inquiry (0x01|0x0001) status 0x00 ncmd 7
>>> HCI Event: Inquiry Complete (0x01) plen 1
>>      status 0x00
>>> HCI Event: Command Status (0x0f) plen 4
>>      Unknown (0x00|0x0000) status 0x00 ncmd 8
>> root@(none):~#
>
> this is weird. What does "hciconfig -a" tells you about your dongle?
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real 
> users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] hcitool scan while hidd connection..

[Marcel Holtmann]

Hi Michael,

> hci0:   Type: UART
>          BD Address: 00:80:37:21:49:71 ACL MTU: 672:8 SCO MTU: 64:0
>          UP RUNNING PSCAN ISCAN
>          RX bytes:43024 acl:1533 sco:0 events:835 errors:0
>          TX bytes:11573 acl:467 sco:0 commands:103 errors:0
>          Features: 0xff 0xfb 0x01 0x00 0x00 0x00 0x00 0x00
>          Packet type: DM1 DH1 HV1
>          Link policy: HOLD SNIFF PARK
>          Link mode: SLAVE ACCEPT
>          Name: 'Pad2 ((none))'
>          Class: 0x000100
>          Service Classes: Unspecified
>          Device Class: Computer, Uncategorized
>          HCI Ver: 1.1 (0x1) HCI Rev: 0x8105 LMP Ver: 1.1 (0x1) LMP 
> Subver: 0x8d40
>          Manufacturer: Ericsson Technology Licensing (0)

please call "hciconfig hci0 revision" as root. Where is this module
connected to? Any reason to not enable all packet types and allow role
switch?

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] hcitool scan while hidd connection..

[Michael Frey]

Marcel,

Thanks!!!  I enabled rswitch and all is well.

My module is connected to a UART device.

Thanks again,

Michael

On Apr 18, 2005, at 11:55 AM, Marcel Holtmann wrote:

> Hi Michael,
>
>> hci0:   Type: UART
>>          BD Address: 00:80:37:21:49:71 ACL MTU: 672:8 SCO MTU: 64:0
>>          UP RUNNING PSCAN ISCAN
>>          RX bytes:43024 acl:1533 sco:0 events:835 errors:0
>>          TX bytes:11573 acl:467 sco:0 commands:103 errors:0
>>          Features: 0xff 0xfb 0x01 0x00 0x00 0x00 0x00 0x00
>>          Packet type: DM1 DH1 HV1
>>          Link policy: HOLD SNIFF PARK
>>          Link mode: SLAVE ACCEPT
>>          Name: 'Pad2 ((none))'
>>          Class: 0x000100
>>          Service Classes: Unspecified
>>          Device Class: Computer, Uncategorized
>>          HCI Ver: 1.1 (0x1) HCI Rev: 0x8105 LMP Ver: 1.1 (0x1) LMP
>> Subver: 0x8d40
>>          Manufacturer: Ericsson Technology Licensing (0)
>
> please call "hciconfig hci0 revision" as root. Where is this module
> connected to? Any reason to not enable all packet types and allow role
> switch?
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real 
> users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel