[Bluez-users] Bluettoth problems

[Bluez-users] Bluettoth problems

[Bruno Campos]

[-- Attachment #1: Type: text/plain, Size: 1951 bytes --]

  Hello
  I have a IPAQ 5500, with familiar 0.7.2, + bluez, but i have a problem with bueltooth, when i try:
  pand -D --connect 00:09:DD:10:44:84 --role PANU --service GN --persist
  I can do ping on my PDA(169.254.10.119) to PC(169.254.10.117), and ping on my PC to PDA, and it works fine, but after a few minuts, the connection going down, and i can't ping again. So, i don't know what it is. If i try tunr off the bluetooth an turn on again, the connection going up again but after a few minuts going down. So anyone knows what problem is??

  When i do : hcidump:
  .
  .
  .
  > HCI Event: Hardware Error(0x10) plen 1
  > ACL data: handle 0x0001 flags 0x02 dlen 85
      L2CAP(d): cid 0x40 len 81 [psm 0]
  < ACL data: handle 0x0001 flags 0x02 dlen 113
      L2CAP(d): cid 0x67 len 109 [psm 0]
  > ACL data: handle 0x0001 flags 0x02 dlen 130
      L2CAP(d): cid 0x40 len 126 [psm 0]
  > ACL data: handle 0x0001 flags 0x02 dlen 85
      L2CAP(d): cid 0x40 len 81 [psm 0]
  < ACL data: handle 0x0001 flags 0x02 dlen 113
      L2CAP(d): cid 0x67 len 109 [psm 0]
  > ACL data: handle 0x0001 flags 0x02 dlen 339

  Best Regards
  Bruno Campos bmac@student.dei.uc.pt



DISCLAIMER: This message may contain confidential information or privileged material and is intended only for the individual(s) named. If you are not a named addressee and mistakenly received this message you should not copy or otherwise disseminate it: please delete this e-mail from your system and notify the sender immediately. E-mail transmissions are not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete or contain viruses. Therefore, the sender does not accept liability for any errors or omissions in the contents of this message that arise as a result of e-mail transmissions. Please request a hard copy version if verification is required. Critical Software.



[-- Attachment #2: Type: text/html, Size: 3303 bytes --]

Re: [Bluez-users] Bluettoth problems

[Marcel Holtmann]

Hi Bruno,

>         I have a IPAQ 5500, with familiar 0.7.2, + bluez, but i have a
>         problem with bueltooth, when i try:
>         pand -D --connect 00:09:DD:10:44:84 --role PANU --service GN
>         --persist
>         I can do ping on my PDA(169.254.10.119) to PC(169.254.10.117),
>         and ping on my PC to PDA, and it works fine, but after a few
>         minuts, the connection going down, and i can't ping again. So,
>         i don't know what it is. If i try tunr off the bluetooth an
>         turn on again, the connection going up again but after a few
>         minuts going down. So anyone knows what problem is??

what do you expect from re-posting this email?

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

[Bluez-users] Bluettoth problems

[Bruno Campos]

[-- Attachment #1: Type: text/plain, Size: 1883 bytes --]

Hello
I have a IPAQ 5500, with familiar 0.7.2, + bluez, but i have a problem with bueltooth, when i try:
pand -D --connect 00:09:DD:10:44:84 --role PANU --service GN --persist
I can do ping on my PDA(169.254.10.119) to PC(169.254.10.117), and ping on my PC to PDA, and it works fine, but after a few minuts, the connection going down, and i can't ping again. So, i don't know what it is. If i try tunr off the bluetooth an turn on again, the connection going up again but after a few minuts going down. So anyone knows what problem is??

When i do : hcidump:
.
.
.
> HCI Event: Hardware Error(0x10) plen 1
> ACL data: handle 0x0001 flags 0x02 dlen 85
    L2CAP(d): cid 0x40 len 81 [psm 0]
< ACL data: handle 0x0001 flags 0x02 dlen 113
    L2CAP(d): cid 0x67 len 109 [psm 0]
> ACL data: handle 0x0001 flags 0x02 dlen 130
    L2CAP(d): cid 0x40 len 126 [psm 0]
> ACL data: handle 0x0001 flags 0x02 dlen 85
    L2CAP(d): cid 0x40 len 81 [psm 0]
< ACL data: handle 0x0001 flags 0x02 dlen 113
    L2CAP(d): cid 0x67 len 109 [psm 0]
> ACL data: handle 0x0001 flags 0x02 dlen 339

Best Regards
Bruno Campos 


DISCLAIMER: This message may contain confidential information or privileged material and is intended only for the individual(s) named. If you are not a named addressee and mistakenly received this message you should not copy or otherwise disseminate it: please delete this e-mail from your system and notify the sender immediately. E-mail transmissions are not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete or contain viruses. Therefore, the sender does not accept liability for any errors or omissions in the contents of this message that arise as a result of e-mail transmissions. Please request a hard copy version if verification is required. Critical Software.



[-- Attachment #2: Type: text/html, Size: 2932 bytes --]

Re: [Bluez-users] Bluettoth problems

[Marcel Holtmann]

Hi Bruno,

> I have a IPAQ 5500, with familiar 0.7.2, + bluez, but i have a problem
> with bueltooth, when i try:
> pand -D --connect 00:09:DD:10:44:84 --role PANU --service GN --persist
> I can do ping on my PDA(169.254.10.119) to PC(169.254.10.117), and
> ping on my PC to PDA, and it works fine, but after a few minuts, the
> connection going down, and i can't ping again. So, i don't know what
> it is. If i try tunr off the bluetooth an turn on again, the
> connection going up again but after a few minuts going down. So anyone
> knows what problem is??
>  
> When i do : hcidump:
> .
> .
> .
> > HCI Event: Hardware Error(0x10) plen 1

search the mailing list archives for the HCI hardware error in
conjunction with the iPAQ 5500.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users