* [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
@ 2005-06-27 17:39 bugtrack
2005-09-08 6:36 ` Allan Klinbail
0 siblings, 1 reply; 17+ messages in thread
From: bugtrack @ 2005-06-27 17:39 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1203>
======================================================================
Reported By: sonofzev
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1203
Category: GENERIC - mtpav
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution: Gentoo 2004.3 - 64-bit native
Kernel Version: 2.6.9 or 2.6.11 or 2.6.12
======================================================================
Date Submitted: 06-19-2005 08:51 CEST
Last Modified: 06-27-2005 19:39 CEST
======================================================================
Summary: mtpav driver locks X on 64 bit native system
Description:
Locks system completely when loading X if mtpav module is already loaded.
If loading the module after loading X, the system completely lock when
firing up any sequencer app.
This does not happen on my 32-bit Pentium 4
======================================================================
----------------------------------------------------------------------
tiwai - 06-27-05 16:57
----------------------------------------------------------------------
Yes. The driver doesn't probe but just trusts the module option (or uses
the default value 7 blindly).
----------------------------------------------------------------------
sonofzev - 06-27-05 19:39
----------------------------------------------------------------------
confirmed that I am using IRQ7 for my printer port.
Issue History
Date Modified Username Field Change
======================================================================
06-19-05 08:51 sonofzev New Issue
06-19-05 08:51 sonofzev Distribution => Gentoo 2004.3 -
64-bit native
06-19-05 08:51 sonofzev Kernel Version => 2.6.9 or 2.6.11 or
2.6.12
06-19-05 16:05 sonofzev Note Added: 0005089
06-19-05 16:24 sonofzev Note Deleted: 0005089
06-20-05 13:47 sonofzev Note Added: 0005097
06-21-05 11:25 tiwai Note Added: 0005104
06-26-05 10:54 sonofzev Note Added: 0005261
06-27-05 16:57 tiwai Note Added: 0005281
06-27-05 19:39 sonofzev Note Added: 0005286
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
2005-06-27 17:39 [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system bugtrack
@ 2005-09-08 6:36 ` Allan Klinbail
2005-09-08 16:36 ` Lee Revell
0 siblings, 1 reply; 17+ messages in thread
From: Allan Klinbail @ 2005-09-08 6:36 UTC (permalink / raw)
To: alsa-devel
Is any work being done on this...
To my horror and disgust for work purposes I needed to install winblows
on the amd64 and the MOTU proprietary 32 bit driver works...
This simply confirms I have all my printer port settings correct in
BIOS...
On Mon, 2005-06-27 at 19:39 +0200, bugtrack@alsa-project.org wrote:
> A NOTE has been added to this issue.
> ======================================================================
> <https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1203>
> ======================================================================
> Reported By: sonofzev
> Assigned To:
> ======================================================================
> Project: ALSA - driver
> Issue ID: 1203
> Category: GENERIC - mtpav
> Reproducibility: always
> Severity: crash
> Priority: normal
> Status: new
> Distribution: Gentoo 2004.3 - 64-bit native
> Kernel Version: 2.6.9 or 2.6.11 or 2.6.12
> ======================================================================
> Date Submitted: 06-19-2005 08:51 CEST
> Last Modified: 06-27-2005 19:39 CEST
> ======================================================================
> Summary: mtpav driver locks X on 64 bit native system
> Description:
> Locks system completely when loading X if mtpav module is already loaded.
>
> If loading the module after loading X, the system completely lock when
> firing up any sequencer app.
>
> This does not happen on my 32-bit Pentium 4
>
> ======================================================================
>
> ----------------------------------------------------------------------
> tiwai - 06-27-05 16:57
> ----------------------------------------------------------------------
> Yes. The driver doesn't probe but just trusts the module option (or uses
> the default value 7 blindly).
>
> ----------------------------------------------------------------------
> sonofzev - 06-27-05 19:39
> ----------------------------------------------------------------------
> confirmed that I am using IRQ7 for my printer port.
>
> Issue History
> Date Modified Username Field Change
> ======================================================================
> 06-19-05 08:51 sonofzev New Issue
> 06-19-05 08:51 sonofzev Distribution => Gentoo 2004.3 -
> 64-bit native
> 06-19-05 08:51 sonofzev Kernel Version => 2.6.9 or 2.6.11 or
> 2.6.12
> 06-19-05 16:05 sonofzev Note Added: 0005089
> 06-19-05 16:24 sonofzev Note Deleted: 0005089
> 06-20-05 13:47 sonofzev Note Added: 0005097
> 06-21-05 11:25 tiwai Note Added: 0005104
> 06-26-05 10:54 sonofzev Note Added: 0005261
> 06-27-05 16:57 tiwai Note Added: 0005281
> 06-27-05 19:39 sonofzev Note Added: 0005286
> ======================================================================
>
>
>
>
> -------------------------------------------------------
> SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
> from IBM. Find simple to follow Roadmaps, straightforward articles,
> informative Webcasts and more! Get everything you need to get up to
> speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
>
--
Allan Klinbail <allan_k@dodo.com.au>
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
2005-09-08 6:36 ` Allan Klinbail
@ 2005-09-08 16:36 ` Lee Revell
2005-09-08 16:56 ` Takashi Iwai
0 siblings, 1 reply; 17+ messages in thread
From: Lee Revell @ 2005-09-08 16:36 UTC (permalink / raw)
To: Allan Klinbail; +Cc: alsa-devel
On Thu, 2005-09-08 at 16:36 +1000, Allan Klinbail wrote:
> Is any work being done on this...
>
> To my horror and disgust for work purposes I needed to install winblows
> on the amd64 and the MOTU proprietary 32 bit driver works...
>
> This simply confirms I have all my printer port settings correct in
> BIOS...
Um, no, because the ALSA developers almost certainly don't have the
hardware. YOU need to work on it.
Lee
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
2005-09-08 16:36 ` Lee Revell
@ 2005-09-08 16:56 ` Takashi Iwai
2005-09-21 16:03 ` Allan Klinbail
0 siblings, 1 reply; 17+ messages in thread
From: Takashi Iwai @ 2005-09-08 16:56 UTC (permalink / raw)
To: Lee Revell; +Cc: Allan Klinbail, alsa-devel
At Thu, 08 Sep 2005 12:36:33 -0400,
Lee Revell wrote:
>
> On Thu, 2005-09-08 at 16:36 +1000, Allan Klinbail wrote:
> > Is any work being done on this...
> >
> > To my horror and disgust for work purposes I needed to install winblows
> > on the amd64 and the MOTU proprietary 32 bit driver works...
> >
> > This simply confirms I have all my printer port settings correct in
> > BIOS...
>
> Um, no, because the ALSA developers almost certainly don't have the
> hardware. YOU need to work on it.
The problem is that we haven't changed the driver so much for a long
time. And the driver is quite simple. It's a parallel port.
So, I'm wondering what is broken.
You can try the following patch just for testing. It postpones the
request_irq() call, in case any wandering irq caused the trouble.
Takashi
Index: alsa-kernel/drivers/mtpav.c
===================================================================
RCS file: /home/iwai/cvs/alsa/alsa-kernel/drivers/mtpav.c,v
retrieving revision 1.29
diff -u -r1.29 mtpav.c
--- alsa-kernel/drivers/mtpav.c 5 Sep 2005 16:16:33 -0000 1.29
+++ alsa-kernel/drivers/mtpav.c 8 Sep 2005 16:55:34 -0000
@@ -592,13 +592,18 @@
/*
* get ISA resources
*/
-static int snd_mtpav_get_ISA(mtpav_t * mcard)
+static int __init snd_mtpav_get_ISA_port(mtpav_t * mcard)
{
if ((mcard->res_port = request_region(port, 3, "MotuMTPAV MIDI")) == NULL) {
snd_printk("MTVAP port 0x%lx is busy\n", port);
return -EBUSY;
}
mcard->port = port;
+ return 0;
+}
+
+static int __init snd_mtpav_get_ISA_irq(mtpav_t * mcard)
+{
if (request_irq(irq, snd_mtpav_irqh, SA_INTERRUPT, "MOTU MTPAV", (void *)mcard)) {
snd_printk("MTVAP IRQ %d busy\n", irq);
return -EBUSY;
@@ -742,7 +747,7 @@
return -ENOMEM;
}
- err = snd_mtpav_get_ISA(mtp_card);
+ err = snd_mtpav_get_ISA_port(mtp_card);
//printk("snd_mtpav_get_ISA returned: %d\n", err);
if (err < 0)
goto __error;
@@ -769,6 +774,10 @@
snd_mtpav_portscan(mtp_card);
+ err = snd_mtpav_get_ISA_irq(mtp_card);
+ if (err < 0)
+ goto __error;
+
printk(KERN_INFO "Motu MidiTimePiece on parallel port irq: %d ioport: 0x%lx\n", irq, port);
return 0;
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
2005-09-08 16:56 ` Takashi Iwai
@ 2005-09-21 16:03 ` Allan Klinbail
2005-09-29 13:22 ` Takashi Iwai
0 siblings, 1 reply; 17+ messages in thread
From: Allan Klinbail @ 2005-09-21 16:03 UTC (permalink / raw)
To: Takashi Iwai; +Cc: Lee Revell, alsa-devel
Sorry I haven't been on for a little while... how do I apply this patch?
On Thu, 2005-09-08 at 18:56 +0200, Takashi Iwai wrote:
> At Thu, 08 Sep 2005 12:36:33 -0400,
> Lee Revell wrote:
> >
> > On Thu, 2005-09-08 at 16:36 +1000, Allan Klinbail wrote:
> > > Is any work being done on this...
> > >
> > > To my horror and disgust for work purposes I needed to install winblows
> > > on the amd64 and the MOTU proprietary 32 bit driver works...
> > >
> > > This simply confirms I have all my printer port settings correct in
> > > BIOS...
> >
> > Um, no, because the ALSA developers almost certainly don't have the
> > hardware. YOU need to work on it.
>
> The problem is that we haven't changed the driver so much for a long
> time. And the driver is quite simple. It's a parallel port.
> So, I'm wondering what is broken.
>
> You can try the following patch just for testing. It postpones the
> request_irq() call, in case any wandering irq caused the trouble.
>
>
> Takashi
>
>
> Index: alsa-kernel/drivers/mtpav.c
> ===================================================================
> RCS file: /home/iwai/cvs/alsa/alsa-kernel/drivers/mtpav.c,v
> retrieving revision 1.29
> diff -u -r1.29 mtpav.c
> --- alsa-kernel/drivers/mtpav.c 5 Sep 2005 16:16:33 -0000 1.29
> +++ alsa-kernel/drivers/mtpav.c 8 Sep 2005 16:55:34 -0000
> @@ -592,13 +592,18 @@
> /*
> * get ISA resources
> */
> -static int snd_mtpav_get_ISA(mtpav_t * mcard)
> +static int __init snd_mtpav_get_ISA_port(mtpav_t * mcard)
> {
> if ((mcard->res_port = request_region(port, 3, "MotuMTPAV MIDI")) == NULL) {
> snd_printk("MTVAP port 0x%lx is busy\n", port);
> return -EBUSY;
> }
> mcard->port = port;
> + return 0;
> +}
> +
> +static int __init snd_mtpav_get_ISA_irq(mtpav_t * mcard)
> +{
> if (request_irq(irq, snd_mtpav_irqh, SA_INTERRUPT, "MOTU MTPAV", (void *)mcard)) {
> snd_printk("MTVAP IRQ %d busy\n", irq);
> return -EBUSY;
> @@ -742,7 +747,7 @@
> return -ENOMEM;
> }
>
> - err = snd_mtpav_get_ISA(mtp_card);
> + err = snd_mtpav_get_ISA_port(mtp_card);
> //printk("snd_mtpav_get_ISA returned: %d\n", err);
> if (err < 0)
> goto __error;
> @@ -769,6 +774,10 @@
>
> snd_mtpav_portscan(mtp_card);
>
> + err = snd_mtpav_get_ISA_irq(mtp_card);
> + if (err < 0)
> + goto __error;
> +
> printk(KERN_INFO "Motu MidiTimePiece on parallel port irq: %d ioport: 0x%lx\n", irq, port);
>
> return 0;
>
--
Allan Klinbail <allan_k@dodo.com.au>
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
2005-09-21 16:03 ` Allan Klinbail
@ 2005-09-29 13:22 ` Takashi Iwai
2005-10-01 13:23 ` Allan Klinbail
0 siblings, 1 reply; 17+ messages in thread
From: Takashi Iwai @ 2005-09-29 13:22 UTC (permalink / raw)
To: Allan Klinbail; +Cc: Lee Revell, alsa-devel
At Thu, 22 Sep 2005 02:03:37 +1000,
Allan Klinbail wrote:
>
> Sorry I haven't been on for a little while... how do I apply this patch?
Copy the mail as a text file (as it is), and run the patch on your
alsa-kernel tree (with -p1 option).
Takashi
>
>
>
> On Thu, 2005-09-08 at 18:56 +0200, Takashi Iwai wrote:
> > At Thu, 08 Sep 2005 12:36:33 -0400,
> > Lee Revell wrote:
> > >
> > > On Thu, 2005-09-08 at 16:36 +1000, Allan Klinbail wrote:
> > > > Is any work being done on this...
> > > >
> > > > To my horror and disgust for work purposes I needed to install winblows
> > > > on the amd64 and the MOTU proprietary 32 bit driver works...
> > > >
> > > > This simply confirms I have all my printer port settings correct in
> > > > BIOS...
> > >
> > > Um, no, because the ALSA developers almost certainly don't have the
> > > hardware. YOU need to work on it.
> >
> > The problem is that we haven't changed the driver so much for a long
> > time. And the driver is quite simple. It's a parallel port.
> > So, I'm wondering what is broken.
> >
> > You can try the following patch just for testing. It postpones the
> > request_irq() call, in case any wandering irq caused the trouble.
> >
> >
> > Takashi
> >
> >
> > Index: alsa-kernel/drivers/mtpav.c
> > ===================================================================
> > RCS file: /home/iwai/cvs/alsa/alsa-kernel/drivers/mtpav.c,v
> > retrieving revision 1.29
> > diff -u -r1.29 mtpav.c
> > --- alsa-kernel/drivers/mtpav.c 5 Sep 2005 16:16:33 -0000 1.29
> > +++ alsa-kernel/drivers/mtpav.c 8 Sep 2005 16:55:34 -0000
> > @@ -592,13 +592,18 @@
> > /*
> > * get ISA resources
> > */
> > -static int snd_mtpav_get_ISA(mtpav_t * mcard)
> > +static int __init snd_mtpav_get_ISA_port(mtpav_t * mcard)
> > {
> > if ((mcard->res_port = request_region(port, 3, "MotuMTPAV MIDI")) == NULL) {
> > snd_printk("MTVAP port 0x%lx is busy\n", port);
> > return -EBUSY;
> > }
> > mcard->port = port;
> > + return 0;
> > +}
> > +
> > +static int __init snd_mtpav_get_ISA_irq(mtpav_t * mcard)
> > +{
> > if (request_irq(irq, snd_mtpav_irqh, SA_INTERRUPT, "MOTU MTPAV", (void *)mcard)) {
> > snd_printk("MTVAP IRQ %d busy\n", irq);
> > return -EBUSY;
> > @@ -742,7 +747,7 @@
> > return -ENOMEM;
> > }
> >
> > - err = snd_mtpav_get_ISA(mtp_card);
> > + err = snd_mtpav_get_ISA_port(mtp_card);
> > //printk("snd_mtpav_get_ISA returned: %d\n", err);
> > if (err < 0)
> > goto __error;
> > @@ -769,6 +774,10 @@
> >
> > snd_mtpav_portscan(mtp_card);
> >
> > + err = snd_mtpav_get_ISA_irq(mtp_card);
> > + if (err < 0)
> > + goto __error;
> > +
> > printk(KERN_INFO "Motu MidiTimePiece on parallel port irq: %d ioport: 0x%lx\n", irq, port);
> >
> > return 0;
> >
> --
> Allan Klinbail <allan_k@dodo.com.au>
>
>
>
> -------------------------------------------------------
> SF.Net email is sponsored by:
> Tame your development challenges with Apache's Geronimo App Server.
> Download it for free - -and be entered to win a 42" plasma tv or your very
> own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
>
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
2005-09-29 13:22 ` Takashi Iwai
@ 2005-10-01 13:23 ` Allan Klinbail
2005-10-01 15:01 ` Allan Klinbail
0 siblings, 1 reply; 17+ messages in thread
From: Allan Klinbail @ 2005-10-01 13:23 UTC (permalink / raw)
To: Takashi Iwai; +Cc: Lee Revell, alsa-devel
Hi Takashi,
I tested the patch. I still get a hard lock when activating the driver
through any sequencer.
cheers
Allan
On Thu, 2005-09-29 at 15:22 +0200, Takashi Iwai wrote:
> At Thu, 22 Sep 2005 02:03:37 +1000,
> Allan Klinbail wrote:
> >
> > Sorry I haven't been on for a little while... how do I apply this patch?
>
> Copy the mail as a text file (as it is), and run the patch on your
> alsa-kernel tree (with -p1 option).
>
>
> Takashi
>
> >
> >
> >
> > On Thu, 2005-09-08 at 18:56 +0200, Takashi Iwai wrote:
> > > At Thu, 08 Sep 2005 12:36:33 -0400,
> > > Lee Revell wrote:
> > > >
> > > > On Thu, 2005-09-08 at 16:36 +1000, Allan Klinbail wrote:
> > > > > Is any work being done on this...
> > > > >
> > > > > To my horror and disgust for work purposes I needed to install winblows
> > > > > on the amd64 and the MOTU proprietary 32 bit driver works...
> > > > >
> > > > > This simply confirms I have all my printer port settings correct in
> > > > > BIOS...
> > > >
> > > > Um, no, because the ALSA developers almost certainly don't have the
> > > > hardware. YOU need to work on it.
> > >
> > > The problem is that we haven't changed the driver so much for a long
> > > time. And the driver is quite simple. It's a parallel port.
> > > So, I'm wondering what is broken.
> > >
> > > You can try the following patch just for testing. It postpones the
> > > request_irq() call, in case any wandering irq caused the trouble.
> > >
> > >
> > > Takashi
> > >
> > >
> > > Index: alsa-kernel/drivers/mtpav.c
> > > ===================================================================
> > > RCS file: /home/iwai/cvs/alsa/alsa-kernel/drivers/mtpav.c,v
> > > retrieving revision 1.29
> > > diff -u -r1.29 mtpav.c
> > > --- alsa-kernel/drivers/mtpav.c 5 Sep 2005 16:16:33 -0000 1.29
> > > +++ alsa-kernel/drivers/mtpav.c 8 Sep 2005 16:55:34 -0000
> > > @@ -592,13 +592,18 @@
> > > /*
> > > * get ISA resources
> > > */
> > > -static int snd_mtpav_get_ISA(mtpav_t * mcard)
> > > +static int __init snd_mtpav_get_ISA_port(mtpav_t * mcard)
> > > {
> > > if ((mcard->res_port = request_region(port, 3, "MotuMTPAV MIDI")) == NULL) {
> > > snd_printk("MTVAP port 0x%lx is busy\n", port);
> > > return -EBUSY;
> > > }
> > > mcard->port = port;
> > > + return 0;
> > > +}
> > > +
> > > +static int __init snd_mtpav_get_ISA_irq(mtpav_t * mcard)
> > > +{
> > > if (request_irq(irq, snd_mtpav_irqh, SA_INTERRUPT, "MOTU MTPAV", (void *)mcard)) {
> > > snd_printk("MTVAP IRQ %d busy\n", irq);
> > > return -EBUSY;
> > > @@ -742,7 +747,7 @@
> > > return -ENOMEM;
> > > }
> > >
> > > - err = snd_mtpav_get_ISA(mtp_card);
> > > + err = snd_mtpav_get_ISA_port(mtp_card);
> > > //printk("snd_mtpav_get_ISA returned: %d\n", err);
> > > if (err < 0)
> > > goto __error;
> > > @@ -769,6 +774,10 @@
> > >
> > > snd_mtpav_portscan(mtp_card);
> > >
> > > + err = snd_mtpav_get_ISA_irq(mtp_card);
> > > + if (err < 0)
> > > + goto __error;
> > > +
> > > printk(KERN_INFO "Motu MidiTimePiece on parallel port irq: %d ioport: 0x%lx\n", irq, port);
> > >
> > > return 0;
> > >
> > --
> > Allan Klinbail <allan_k@dodo.com.au>
> >
> >
> >
> > -------------------------------------------------------
> > SF.Net email is sponsored by:
> > Tame your development challenges with Apache's Geronimo App Server.
> > Download it for free - -and be entered to win a 42" plasma tv or your very
> > own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/alsa-devel
> >
>
--
Allan Klinbail <allan_k@dodo.com.au>
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
2005-10-01 13:23 ` Allan Klinbail
@ 2005-10-01 15:01 ` Allan Klinbail
0 siblings, 0 replies; 17+ messages in thread
From: Allan Klinbail @ 2005-10-01 15:01 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
Sorry , it actually looks liek the patch failed .. but no errors were
reported but also patch didn't seem to do anything .....
I copied the text beginning with "Index", saved it to
alsa-driver/alsa-kernel and then applied patch -p1, is that the correct
process?
On Sat, 2005-10-01 at 23:23 +1000, Allan Klinbail wrote:
> Hi Takashi,
>
> I tested the patch. I still get a hard lock when activating the driver
> through any sequencer.
>
> cheers
>
> Allan
>
> On Thu, 2005-09-29 at 15:22 +0200, Takashi Iwai wrote:
> > At Thu, 22 Sep 2005 02:03:37 +1000,
> > Allan Klinbail wrote:
> > >
> > > Sorry I haven't been on for a little while... how do I apply this patch?
> >
> > Copy the mail as a text file (as it is), and run the patch on your
> > alsa-kernel tree (with -p1 option).
> >
> >
> > Takashi
> >
> > >
> > >
> > >
> > > On Thu, 2005-09-08 at 18:56 +0200, Takashi Iwai wrote:
> > > > At Thu, 08 Sep 2005 12:36:33 -0400,
> > > > Lee Revell wrote:
> > > > >
> > > > > On Thu, 2005-09-08 at 16:36 +1000, Allan Klinbail wrote:
> > > > > > Is any work being done on this...
> > > > > >
> > > > > > To my horror and disgust for work purposes I needed to install winblows
> > > > > > on the amd64 and the MOTU proprietary 32 bit driver works...
> > > > > >
> > > > > > This simply confirms I have all my printer port settings correct in
> > > > > > BIOS...
> > > > >
> > > > > Um, no, because the ALSA developers almost certainly don't have the
> > > > > hardware. YOU need to work on it.
> > > >
> > > > The problem is that we haven't changed the driver so much for a long
> > > > time. And the driver is quite simple. It's a parallel port.
> > > > So, I'm wondering what is broken.
> > > >
> > > > You can try the following patch just for testing. It postpones the
> > > > request_irq() call, in case any wandering irq caused the trouble.
> > > >
> > > >
> > > > Takashi
> > > >
> > > >
> > > > Index: alsa-kernel/drivers/mtpav.c
> > > > ===================================================================
> > > > RCS file: /home/iwai/cvs/alsa/alsa-kernel/drivers/mtpav.c,v
> > > > retrieving revision 1.29
> > > > diff -u -r1.29 mtpav.c
> > > > --- alsa-kernel/drivers/mtpav.c 5 Sep 2005 16:16:33 -0000 1.29
> > > > +++ alsa-kernel/drivers/mtpav.c 8 Sep 2005 16:55:34 -0000
> > > > @@ -592,13 +592,18 @@
> > > > /*
> > > > * get ISA resources
> > > > */
> > > > -static int snd_mtpav_get_ISA(mtpav_t * mcard)
> > > > +static int __init snd_mtpav_get_ISA_port(mtpav_t * mcard)
> > > > {
> > > > if ((mcard->res_port = request_region(port, 3, "MotuMTPAV MIDI")) == NULL) {
> > > > snd_printk("MTVAP port 0x%lx is busy\n", port);
> > > > return -EBUSY;
> > > > }
> > > > mcard->port = port;
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int __init snd_mtpav_get_ISA_irq(mtpav_t * mcard)
> > > > +{
> > > > if (request_irq(irq, snd_mtpav_irqh, SA_INTERRUPT, "MOTU MTPAV", (void *)mcard)) {
> > > > snd_printk("MTVAP IRQ %d busy\n", irq);
> > > > return -EBUSY;
> > > > @@ -742,7 +747,7 @@
> > > > return -ENOMEM;
> > > > }
> > > >
> > > > - err = snd_mtpav_get_ISA(mtp_card);
> > > > + err = snd_mtpav_get_ISA_port(mtp_card);
> > > > //printk("snd_mtpav_get_ISA returned: %d\n", err);
> > > > if (err < 0)
> > > > goto __error;
> > > > @@ -769,6 +774,10 @@
> > > >
> > > > snd_mtpav_portscan(mtp_card);
> > > >
> > > > + err = snd_mtpav_get_ISA_irq(mtp_card);
> > > > + if (err < 0)
> > > > + goto __error;
> > > > +
> > > > printk(KERN_INFO "Motu MidiTimePiece on parallel port irq: %d ioport: 0x%lx\n", irq, port);
> > > >
> > > > return 0;
> > > >
> > > --
> > > Allan Klinbail <allan_k@dodo.com.au>
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > SF.Net email is sponsored by:
> > > Tame your development challenges with Apache's Geronimo App Server.
> > > Download it for free - -and be entered to win a 42" plasma tv or your very
> > > own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/alsa-devel
> > >
> >
--
Allan Klinbail <sonofzev@dodo.com.au>
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
^ permalink raw reply [flat|nested] 17+ messages in thread
* [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
@ 2006-04-25 11:19 bugtrack
0 siblings, 0 replies; 17+ messages in thread
From: bugtrack @ 2006-04-25 11:19 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1203>
======================================================================
Reported By: sonofzev
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1203
Category: GENERIC - mtpav
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution: Gentoo 2004.3 - 64-bit native
Kernel Version: 2.6.9 or 2.6.11 or 2.6.12
======================================================================
Date Submitted: 06-19-2005 08:51 CEST
Last Modified: 04-25-2006 13:19 CEST
======================================================================
Summary: mtpav driver locks X on 64 bit native system
Description:
Locks system completely when loading X if mtpav module is already loaded.
If loading the module after loading X, the system completely lock when
firing up any sequencer app.
This does not happen on my 32-bit Pentium 4
======================================================================
----------------------------------------------------------------------
sonofzev - 04-25-06 13:18
----------------------------------------------------------------------
Still not working
have tested settings and was able to achieve successful playback only when
giving the system an incorrect IRQ (3).
When pointing to the correct settings the system still locks up.
----------------------------------------------------------------------
sonofzev - 04-25-06 13:19
----------------------------------------------------------------------
am currently on 1.10 but I don't think any changes have been made since.
Issue History
Date Modified Username Field Change
======================================================================
06-19-05 08:51 sonofzev New Issue
06-19-05 08:51 sonofzev Distribution => Gentoo 2004.3 -
64-bit native
06-19-05 08:51 sonofzev Kernel Version => 2.6.9 or 2.6.11 or
2.6.12
06-19-05 16:05 sonofzev Note Added: 0005089
06-19-05 16:24 sonofzev Note Deleted: 0005089
06-20-05 13:47 sonofzev Note Added: 0005097
06-21-05 11:25 tiwai Note Added: 0005104
06-26-05 10:54 sonofzev Note Added: 0005261
06-27-05 16:57 tiwai Note Added: 0005281
06-27-05 19:39 sonofzev Note Added: 0005286
06-27-05 19:40 sonofzev Issue Monitored: sonofzev
04-25-06 13:18 sonofzev Note Added: 0009488
04-25-06 13:19 sonofzev Note Added: 0009489
======================================================================
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 17+ messages in thread
* [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
@ 2006-04-25 11:18 bugtrack
0 siblings, 0 replies; 17+ messages in thread
From: bugtrack @ 2006-04-25 11:18 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1203>
======================================================================
Reported By: sonofzev
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1203
Category: GENERIC - mtpav
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution: Gentoo 2004.3 - 64-bit native
Kernel Version: 2.6.9 or 2.6.11 or 2.6.12
======================================================================
Date Submitted: 06-19-2005 08:51 CEST
Last Modified: 04-25-2006 13:18 CEST
======================================================================
Summary: mtpav driver locks X on 64 bit native system
Description:
Locks system completely when loading X if mtpav module is already loaded.
If loading the module after loading X, the system completely lock when
firing up any sequencer app.
This does not happen on my 32-bit Pentium 4
======================================================================
----------------------------------------------------------------------
sonofzev - 06-27-05 19:39
----------------------------------------------------------------------
confirmed that I am using IRQ7 for my printer port.
----------------------------------------------------------------------
sonofzev - 04-25-06 13:18
----------------------------------------------------------------------
Still not working
have tested settings and was able to achieve successful playback only when
giving the system an incorrect IRQ (3).
When pointing to the correct settings the system still locks up.
Issue History
Date Modified Username Field Change
======================================================================
06-19-05 08:51 sonofzev New Issue
06-19-05 08:51 sonofzev Distribution => Gentoo 2004.3 -
64-bit native
06-19-05 08:51 sonofzev Kernel Version => 2.6.9 or 2.6.11 or
2.6.12
06-19-05 16:05 sonofzev Note Added: 0005089
06-19-05 16:24 sonofzev Note Deleted: 0005089
06-20-05 13:47 sonofzev Note Added: 0005097
06-21-05 11:25 tiwai Note Added: 0005104
06-26-05 10:54 sonofzev Note Added: 0005261
06-27-05 16:57 tiwai Note Added: 0005281
06-27-05 19:39 sonofzev Note Added: 0005286
06-27-05 19:40 sonofzev Issue Monitored: sonofzev
04-25-06 13:18 sonofzev Note Added: 0009488
======================================================================
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 17+ messages in thread
* [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
@ 2005-06-27 14:57 bugtrack
0 siblings, 0 replies; 17+ messages in thread
From: bugtrack @ 2005-06-27 14:57 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1203>
======================================================================
Reported By: sonofzev
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1203
Category: GENERIC - mtpav
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution: Gentoo 2004.3 - 64-bit native
Kernel Version: 2.6.9 or 2.6.11 or 2.6.12
======================================================================
Date Submitted: 06-19-2005 08:51 CEST
Last Modified: 06-27-2005 16:57 CEST
======================================================================
Summary: mtpav driver locks X on 64 bit native system
Description:
Locks system completely when loading X if mtpav module is already loaded.
If loading the module after loading X, the system completely lock when
firing up any sequencer app.
This does not happen on my 32-bit Pentium 4
======================================================================
----------------------------------------------------------------------
sonofzev - 06-26-05 10:54
----------------------------------------------------------------------
How do I check?
I have not setup any options, do I need to check BIOS?
cheers
Allan
----------------------------------------------------------------------
tiwai - 06-27-05 16:57
----------------------------------------------------------------------
Yes. The driver doesn't probe but just trusts the module option (or uses
the default value 7 blindly).
Issue History
Date Modified Username Field Change
======================================================================
06-19-05 08:51 sonofzev New Issue
06-19-05 08:51 sonofzev Distribution => Gentoo 2004.3 -
64-bit native
06-19-05 08:51 sonofzev Kernel Version => 2.6.9 or 2.6.11 or
2.6.12
06-19-05 16:05 sonofzev Note Added: 0005089
06-19-05 16:24 sonofzev Note Deleted: 0005089
06-20-05 13:47 sonofzev Note Added: 0005097
06-21-05 11:25 tiwai Note Added: 0005104
06-26-05 10:54 sonofzev Note Added: 0005261
06-27-05 16:57 tiwai Note Added: 0005281
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 17+ messages in thread
* [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
@ 2005-06-26 8:54 bugtrack
0 siblings, 0 replies; 17+ messages in thread
From: bugtrack @ 2005-06-26 8:54 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1203>
======================================================================
Reported By: sonofzev
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1203
Category: GENERIC - mtpav
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution: Gentoo 2004.3 - 64-bit native
Kernel Version: 2.6.9 or 2.6.11 or 2.6.12
======================================================================
Date Submitted: 06-19-2005 08:51 CEST
Last Modified: 06-26-2005 10:54 CEST
======================================================================
Summary: mtpav driver locks X on 64 bit native system
Description:
Locks system completely when loading X if mtpav module is already loaded.
If loading the module after loading X, the system completely lock when
firing up any sequencer app.
This does not happen on my 32-bit Pentium 4
======================================================================
----------------------------------------------------------------------
tiwai - 06-21-05 11:25
----------------------------------------------------------------------
Is the interrupt correct? As default, it's set to irq 7.
----------------------------------------------------------------------
sonofzev - 06-26-05 10:54
----------------------------------------------------------------------
How do I check?
I have not setup any options, do I need to check BIOS?
cheers
Allan
Issue History
Date Modified Username Field Change
======================================================================
06-19-05 08:51 sonofzev New Issue
06-19-05 08:51 sonofzev Distribution => Gentoo 2004.3 -
64-bit native
06-19-05 08:51 sonofzev Kernel Version => 2.6.9 or 2.6.11 or
2.6.12
06-19-05 16:05 sonofzev Note Added: 0005089
06-19-05 16:24 sonofzev Note Deleted: 0005089
06-20-05 13:47 sonofzev Note Added: 0005097
06-21-05 11:25 tiwai Note Added: 0005104
06-26-05 10:54 sonofzev Note Added: 0005261
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 17+ messages in thread
* [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
@ 2005-06-21 9:25 bugtrack
0 siblings, 0 replies; 17+ messages in thread
From: bugtrack @ 2005-06-21 9:25 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1203>
======================================================================
Reported By: sonofzev
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1203
Category: GENERIC - mtpav
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution: Gentoo 2004.3 - 64-bit native
Kernel Version: 2.6.9 or 2.6.11 or 2.6.12
======================================================================
Date Submitted: 06-19-2005 08:51 CEST
Last Modified: 06-21-2005 11:25 CEST
======================================================================
Summary: mtpav driver locks X on 64 bit native system
Description:
Locks system completely when loading X if mtpav module is already loaded.
If loading the module after loading X, the system completely lock when
firing up any sequencer app.
This does not happen on my 32-bit Pentium 4
======================================================================
----------------------------------------------------------------------
sonofzev - 06-20-05 13:47
----------------------------------------------------------------------
This is still happening after changing the parallel port mode...
now set to ECP + EPP...
my apologies for a hasty solved report
----------------------------------------------------------------------
tiwai - 06-21-05 11:25
----------------------------------------------------------------------
Is the interrupt correct? As default, it's set to irq 7.
Issue History
Date Modified Username Field Change
======================================================================
06-19-05 08:51 sonofzev New Issue
06-19-05 08:51 sonofzev Distribution => Gentoo 2004.3 -
64-bit native
06-19-05 08:51 sonofzev Kernel Version => 2.6.9 or 2.6.11 or
2.6.12
06-19-05 16:05 sonofzev Note Added: 0005089
06-19-05 16:24 sonofzev Note Deleted: 0005089
06-20-05 13:47 sonofzev Note Added: 0005097
06-21-05 11:25 tiwai Note Added: 0005104
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 17+ messages in thread
* [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
@ 2005-06-20 11:47 bugtrack
0 siblings, 0 replies; 17+ messages in thread
From: bugtrack @ 2005-06-20 11:47 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1203>
======================================================================
Reported By: sonofzev
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1203
Category: GENERIC - mtpav
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution: Gentoo 2004.3 - 64-bit native
Kernel Version: 2.6.9 or 2.6.11 or 2.6.12
======================================================================
Date Submitted: 06-19-2005 08:51 CEST
Last Modified: 06-20-2005 13:47 CEST
======================================================================
Summary: mtpav driver locks X on 64 bit native system
Description:
Locks system completely when loading X if mtpav module is already loaded.
If loading the module after loading X, the system completely lock when
firing up any sequencer app.
This does not happen on my 32-bit Pentium 4
======================================================================
----------------------------------------------------------------------
sonofzev - 06-20-05 13:47
----------------------------------------------------------------------
This is still happening after changing the parallel port mode...
now set to ECP + EPP...
my apologies for a hasty solved report
Issue History
Date Modified Username Field Change
======================================================================
06-19-05 08:51 sonofzev New Issue
06-19-05 08:51 sonofzev Distribution => Gentoo 2004.3 -
64-bit native
06-19-05 08:51 sonofzev Kernel Version => 2.6.9 or 2.6.11 or
2.6.12
06-19-05 16:05 sonofzev Note Added: 0005089
06-19-05 16:24 sonofzev Note Deleted: 0005089
06-20-05 13:47 sonofzev Note Added: 0005097
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 17+ messages in thread
* [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
@ 2005-06-19 14:05 bugtrack
0 siblings, 0 replies; 17+ messages in thread
From: bugtrack @ 2005-06-19 14:05 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1203>
======================================================================
Reported By: sonofzev
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1203
Category: GENERIC - mtpav
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution: Gentoo 2004.3 - 64-bit native
Kernel Version: 2.6.9 or 2.6.11 or 2.6.12
======================================================================
Date Submitted: 06-19-2005 08:51 CEST
Last Modified: 06-19-2005 16:05 CEST
======================================================================
Summary: mtpav driver locks X on 64 bit native system
Description:
Locks system completely when loading X if mtpav module is already loaded.
If loading the module after loading X, the system completely lock when
firing up any sequencer app.
This does not happen on my 32-bit Pentium 4
======================================================================
----------------------------------------------------------------------
sonofzev - 06-19-05 16:05
----------------------------------------------------------------------
solved - settings for the parallel port were set to SPP, changed to ECC +
EPP and this has solved the problem....
My apologies... my other PC I never had to change this issue.
Issue History
Date Modified Username Field Change
======================================================================
06-19-05 08:51 sonofzev New Issue
06-19-05 08:51 sonofzev Distribution => Gentoo 2004.3 -
64-bit native
06-19-05 08:51 sonofzev Kernel Version => 2.6.9 or 2.6.11 or
2.6.12
06-19-05 16:05 sonofzev Note Added: 0005089
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 17+ messages in thread
* [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
@ 2005-06-19 6:51 bugtrack
2005-06-19 5:29 ` Allan Klinbail
0 siblings, 1 reply; 17+ messages in thread
From: bugtrack @ 2005-06-19 6:51 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1203>
======================================================================
Reported By: sonofzev
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1203
Category: GENERIC - mtpav
Reproducibility: always
Severity: crash
Priority: normal
Status: new
Distribution: Gentoo 2004.3 - 64-bit native
Kernel Version: 2.6.9 or 2.6.11 or 2.6.12
======================================================================
Date Submitted: 06-19-2005 08:51 CEST
Last Modified: 06-19-2005 08:51 CEST
======================================================================
Summary: mtpav driver locks X on 64 bit native system
Description:
Locks system completely when loading X if mtpav module is already loaded.
If loading the module after loading X, the system completely lock when
firing up any sequencer app.
This does not happen on my 32-bit Pentium 4
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
06-19-05 08:51 sonofzev New Issue
06-19-05 08:51 sonofzev Distribution => Gentoo 2004.3 -
64-bit native
06-19-05 08:51 sonofzev Kernel Version => 2.6.9 or 2.6.11 or
2.6.12
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system
2005-06-19 6:51 bugtrack
@ 2005-06-19 5:29 ` Allan Klinbail
0 siblings, 0 replies; 17+ messages in thread
From: Allan Klinbail @ 2005-06-19 5:29 UTC (permalink / raw)
To: bugtrack; +Cc: alsa-devel
HI All
While I would prefer to use the mtpav, I can get away using my usb midi
device. As such I'm happy to test any patches e.t.c...
cheers
Allan
On Sun, 2005-06-19 at 08:51 +0200, bugtrack@alsa-project.org wrote:
> The following issue has been SUBMITTED.
> ======================================================================
> <https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1203>
> ======================================================================
> Reported By: sonofzev
> Assigned To:
> ======================================================================
> Project: ALSA - driver
> Issue ID: 1203
> Category: GENERIC - mtpav
> Reproducibility: always
> Severity: crash
> Priority: normal
> Status: new
> Distribution: Gentoo 2004.3 - 64-bit native
> Kernel Version: 2.6.9 or 2.6.11 or 2.6.12
> ======================================================================
> Date Submitted: 06-19-2005 08:51 CEST
> Last Modified: 06-19-2005 08:51 CEST
> ======================================================================
> Summary: mtpav driver locks X on 64 bit native system
> Description:
> Locks system completely when loading X if mtpav module is already loaded.
>
> If loading the module after loading X, the system completely lock when
> firing up any sequencer app.
>
> This does not happen on my 32-bit Pentium 4
>
> ======================================================================
>
> Issue History
> Date Modified Username Field Change
> ======================================================================
> 06-19-05 08:51 sonofzev New Issue
> 06-19-05 08:51 sonofzev Distribution => Gentoo 2004.3 -
> 64-bit native
> 06-19-05 08:51 sonofzev Kernel Version => 2.6.9 or 2.6.11 or
> 2.6.12
> ======================================================================
>
>
>
>
> -------------------------------------------------------
> SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
> from IBM. Find simple to follow Roadmaps, straightforward articles,
> informative Webcasts and more! Get everything you need to get up to
> speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
>
--
Allan Klinbail <allan_k@dodo.com.au>
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2006-04-25 11:19 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-06-27 17:39 [ALSA - driver 0001203]: mtpav driver locks X on 64 bit native system bugtrack
2005-09-08 6:36 ` Allan Klinbail
2005-09-08 16:36 ` Lee Revell
2005-09-08 16:56 ` Takashi Iwai
2005-09-21 16:03 ` Allan Klinbail
2005-09-29 13:22 ` Takashi Iwai
2005-10-01 13:23 ` Allan Klinbail
2005-10-01 15:01 ` Allan Klinbail
-- strict thread matches above, loose matches on Subject: below --
2006-04-25 11:19 bugtrack
2006-04-25 11:18 bugtrack
2005-06-27 14:57 bugtrack
2005-06-26 8:54 bugtrack
2005-06-21 9:25 bugtrack
2005-06-20 11:47 bugtrack
2005-06-19 14:05 bugtrack
2005-06-19 6:51 bugtrack
2005-06-19 5:29 ` Allan Klinbail
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.