* ethool for e1000
@ 2005-10-03 12:44 Ted Kaczmarek
2005-10-03 16:38 ` Nivedita Singhvi
0 siblings, 1 reply; 3+ messages in thread
From: Ted Kaczmarek @ 2005-10-03 12:44 UTC (permalink / raw)
To: xen-devel
I recently noticed that after starting xend ethtool no longer work for
my e1000 card. In my 2.X box which is a P4, ethtool is working after
xend start. Same version of e1000 on both boxes.
The unstable box is a
Tyan 2462 SMP, FC4 dom0
The 2.X box is
Dell P330 UP, Centos 4.1 domO
Until xend start ethtool is fine, in both setups I am using the e1000 as
eth0.
Regards,
Ted
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ethool for e1000
2005-10-03 12:44 ethool for e1000 Ted Kaczmarek
@ 2005-10-03 16:38 ` Nivedita Singhvi
2005-10-03 16:56 ` Ted Kaczmarek
0 siblings, 1 reply; 3+ messages in thread
From: Nivedita Singhvi @ 2005-10-03 16:38 UTC (permalink / raw)
To: Ted Kaczmarek; +Cc: xen-devel
Ted Kaczmarek wrote:
> I recently noticed that after starting xend ethtool no longer work for
> my e1000 card. In my 2.X box which is a P4, ethtool is working after
> xend start. Same version of e1000 on both boxes.
>
> The unstable box is a
> Tyan 2462 SMP, FC4 dom0
>
>
> The 2.X box is
> Dell P330 UP, Centos 4.1 domO
>
> Until xend start ethtool is fine, in both setups I am using the e1000 as
> eth0.
Doesn't even work on peth0? Once xend starts, the phydical eth0
interface is renamed to peth0.
thanks,
Nivedita
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ethool for e1000
2005-10-03 16:38 ` Nivedita Singhvi
@ 2005-10-03 16:56 ` Ted Kaczmarek
0 siblings, 0 replies; 3+ messages in thread
From: Ted Kaczmarek @ 2005-10-03 16:56 UTC (permalink / raw)
To: Nivedita Singhvi; +Cc: xen-devel
On Mon, 2005-10-03 at 09:38 -0700, Nivedita Singhvi wrote:
> Ted Kaczmarek wrote:
> > I recently noticed that after starting xend ethtool no longer work for
> > my e1000 card. In my 2.X box which is a P4, ethtool is working after
> > xend start. Same version of e1000 on both boxes.
> >
> > The unstable box is a
> > Tyan 2462 SMP, FC4 dom0
> >
> >
> > The 2.X box is
> > Dell P330 UP, Centos 4.1 domO
> >
> > Until xend start ethtool is fine, in both setups I am using the e1000 as
> > eth0.
>
> Doesn't even work on peth0? Once xend starts, the phydical eth0
> interface is renamed to peth0.
>
> thanks,
> Nivedita
That was it :-)
Thanks a bunch, you guys can ignore my previous stuff with respect to
this, had a draft email queues up.
Ted
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-10-03 16:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-03 12:44 ethool for e1000 Ted Kaczmarek
2005-10-03 16:38 ` Nivedita Singhvi
2005-10-03 16:56 ` Ted Kaczmarek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.