From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: akpm@osdl.org, linux-kernel@vger.kernel.org
Subject: PATCH: EDAC atomic scrub operations
Date: Sat, 15 Oct 2005 19:55:28 +0100 [thread overview]
Message-ID: <1129402528.17923.9.camel@localhost.localdomain> (raw)
EDAC requires a way to scrub memory if an ECC error is found and the
chipset does not do the work automatically. That means rewriting memory
locations atomically with respect to all CPUs _and_ bus masters. That
means we can't use atomic_add(foo, 0) as it gets optimised for non-SMP
This adds a function to include/asm-foo/atomic.h for the platforms
currently supported which implements a scrub of a mapped block.
It also adjusts a few other files include order where atomic.h is
included before types.h as this now causes an error as atomic_scrub uses
u32.
Alan
Signed-off-by: Alan Cox <alan@redhat.com>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-rc2-mm1/drivers/md/kcopyd.c linux-2.6.14-rc2-mm1/drivers/md/kcopyd.c
--- linux.vanilla-2.6.14-rc2-mm1/drivers/md/kcopyd.c 2005-09-22 15:21:40.000000000 +0100
+++ linux-2.6.14-rc2-mm1/drivers/md/kcopyd.c 2005-10-14 18:54:22.000000000 +0100
@@ -8,6 +8,7 @@
* completion notification.
*/
+#include <asm/types.h>
#include <asm/atomic.h>
#include <linux/blkdev.h>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-rc2-mm1/drivers/w1/matrox_w1.c linux-2.6.14-rc2-mm1/drivers/w1/matrox_w1.c
--- linux.vanilla-2.6.14-rc2-mm1/drivers/w1/matrox_w1.c 2005-09-22 15:21:55.000000000 +0100
+++ linux-2.6.14-rc2-mm1/drivers/w1/matrox_w1.c 2005-10-14 19:04:55.000000000 +0100
@@ -19,8 +19,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <asm/atomic.h>
#include <asm/types.h>
+#include <asm/atomic.h>
#include <asm/io.h>
#include <linux/delay.h>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-rc2-mm1/fs/nfsctl.c linux-2.6.14-rc2-mm1/fs/nfsctl.c
--- linux.vanilla-2.6.14-rc2-mm1/fs/nfsctl.c 2005-09-22 15:22:00.000000000 +0100
+++ linux-2.6.14-rc2-mm1/fs/nfsctl.c 2005-10-14 18:39:22.000000000 +0100
@@ -5,6 +5,7 @@
*
*/
#include <linux/config.h>
+#include <linux/types.h>
#include <linux/file.h>
#include <linux/fs.h>
#include <linux/sunrpc/svc.h>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-rc2-mm1/include/asm-i386/atomic.h linux-2.6.14-rc2-mm1/include/asm-i386/atomic.h
--- linux.vanilla-2.6.14-rc2-mm1/include/asm-i386/atomic.h 2005-09-22 15:22:55.000000000 +0100
+++ linux-2.6.14-rc2-mm1/include/asm-i386/atomic.h 2005-10-14 18:30:03.000000000 +0100
@@ -237,4 +237,15 @@
#define smp_mb__before_atomic_inc() barrier()
#define smp_mb__after_atomic_inc() barrier()
+/* ECC atomic, DMA, SMP and interrupt safe scrub function */
+
+static __inline__ void atomic_scrub(unsigned long *virt_addr, u32 size)
+{
+ u32 i;
+ for (i = 0; i < size / 4; i++, virt_addr++)
+ /* Very carefully read and write to memory atomically
+ * so we are interrupt, DMA and SMP safe.
+ */
+ __asm__ __volatile__("lock; addl $0, %0"::"m"(*virt_addr));
+}
#endif
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-rc2-mm1/include/asm-x86_64/atomic.h linux-2.6.14-rc2-mm1/include/asm-x86_64/atomic.h
--- linux.vanilla-2.6.14-rc2-mm1/include/asm-x86_64/atomic.h 2005-09-22 15:22:11.000000000 +0100
+++ linux-2.6.14-rc2-mm1/include/asm-x86_64/atomic.h 2005-10-14 18:29:47.000000000 +0100
@@ -378,4 +378,16 @@
#define smp_mb__before_atomic_inc() barrier()
#define smp_mb__after_atomic_inc() barrier()
+/* ECC atomic, DMA, SMP and interrupt safe scrub function */
+
+static __inline__ void atomic_scrub(unsigned long *virt_addr, u32 size)
+{
+ u32 i;
+ for (i = 0; i < size / 4; i++, virt_addr++)
+ /* Very carefully read and write to memory atomically
+ * so we are interrupt, DMA and SMP safe.
+ */
+ __asm__ __volatile__("lock; addl $0, %0"::"m"(*virt_addr));
+}
+
#endif
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-rc2-mm1/kernel/audit.c linux-2.6.14-rc2-mm1/kernel/audit.c
--- linux.vanilla-2.6.14-rc2-mm1/kernel/audit.c 2005-09-22 15:22:45.000000000 +0100
+++ linux-2.6.14-rc2-mm1/kernel/audit.c 2005-10-14 18:31:38.000000000 +0100
@@ -42,8 +42,8 @@
*/
#include <linux/init.h>
-#include <asm/atomic.h>
#include <asm/types.h>
+#include <asm/atomic.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/err.h>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-rc2-mm1/kernel/auditsc.c linux-2.6.14-rc2-mm1/kernel/auditsc.c
--- linux.vanilla-2.6.14-rc2-mm1/kernel/auditsc.c 2005-09-22 15:22:45.000000000 +0100
+++ linux-2.6.14-rc2-mm1/kernel/auditsc.c 2005-10-14 18:31:51.000000000 +0100
@@ -30,8 +30,8 @@
*/
#include <linux/init.h>
-#include <asm/atomic.h>
#include <asm/types.h>
+#include <asm/atomic.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mount.h>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-rc2-mm1/net/ipv4/raw.c linux-2.6.14-rc2-mm1/net/ipv4/raw.c
--- linux.vanilla-2.6.14-rc2-mm1/net/ipv4/raw.c 2005-09-22 15:22:45.000000000 +0100
+++ linux-2.6.14-rc2-mm1/net/ipv4/raw.c 2005-10-14 19:09:41.000000000 +0100
@@ -40,12 +40,12 @@
*/
#include <linux/config.h>
+#include <linux/types.h>
#include <asm/atomic.h>
#include <asm/byteorder.h>
#include <asm/current.h>
#include <asm/uaccess.h>
#include <asm/ioctls.h>
-#include <linux/types.h>
#include <linux/stddef.h>
#include <linux/slab.h>
#include <linux/errno.h>
next reply other threads:[~2005-10-15 18:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-15 18:55 Alan Cox [this message]
2005-10-15 19:05 ` PATCH: EDAC atomic scrub operations Avi Kivity
2005-10-15 19:44 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1129402528.17923.9.camel@localhost.localdomain \
--to=alan@lxorguk.ukuu.org.uk \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.