* scsi0: Transmission error detected with SCSI Adaptec AIC-7902 U320
@ 2006-06-29 9:13 Andrea Carpani
2006-07-10 10:11 ` Andrea Carpani
0 siblings, 1 reply; 2+ messages in thread
From: Andrea Carpani @ 2006-06-29 9:13 UTC (permalink / raw)
To: linux-scsi
Hello,
I have a server with a weird trashing problem and while investigating on
this issue I've found a SCSI error happening 1 hour before the trashng
occours.
Can someone give me info on this kind of problem (I'm not able to
understand Card State Dump). The server has 2 72Gb disks with one
partition each mirrored between them with software raid.
Thanks,
The server is
http://www.tyan.com/products/html/gx28b2881.html
with B2881G28U4H (Hot-swap U320 SCSI bays)
======
root # uname -a
Linux cp3a 2.6.16.19 #2 SMP Mon Jun 5 19:26:39 CEST 2006 i686 AMD
Opteron(tm) Processor 244 AuthenticAMD GNU/Linux
======
root # cat /proc/scsi/aic79xx/0
Adaptec AIC79xx driver version: 3.0
Adaptec AIC7902 Ultra320 SCSI adapter
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
Allocated SCBs: 64, SG List Length: 128
Serial EEPROM:
0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8
0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8
0x09f4 0x0146 0x2807 0x0010 0xffff 0xffff 0xffff 0xffff
0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x0430 0xb3f7
Target 0 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Goal: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Curr: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Channel A Target 0 Lun 0 Settings
Commands Queued 3281550
Commands Active 0
Command Openings 32
Max Tagged Openings 32
Device Queue Frozen Count 0
Target 1 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Goal: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Curr: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Channel A Target 1 Lun 0 Settings
Commands Queued 3280158
Commands Active 0
Command Openings 32
Max Tagged Openings 32
Device Queue Frozen Count 0
Target 2 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 3 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 4 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 5 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 6 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 7 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 8 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 9 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 10 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 11 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 12 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 13 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 14 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 15 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Here is the error:
Jun 28 12:00:01 localhost kernel: scsi0: Transmission error detected
Jun 28 12:00:01 localhost kernel: LQISTAT1[0x8]:(LQICRCI_NLQ) LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
Jun 28 12:00:01 localhost kernel: SCSISIGI[0x60]:(P_DATAIN_DT) PERRDIAG[0x4]:(CRCERR)
Jun 28 12:00:01 localhost kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Jun 28 12:00:01 localhost kernel: scsi0: Dumping Card State at program address 0x21 Mode 0x33
Jun 28 12:00:01 localhost kernel: Card was paused
Jun 28 12:00:01 localhost kernel: INTSTAT[0x8]:(SCSIINT) SELOID[0x1] SELID[0x0] HS_MAILBOX[0x0]
Jun 28 12:00:01 localhost kernel: INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK) SEQINTSTAT[0x0]
Jun 28 12:00:01 localhost kernel: SAVED_MODE[0x11] DFFSTAT[0x24]:(CURRFIFO_0|FIFO1FREE)
Jun 28 12:00:01 localhost kernel: SCSISIGI[0x76]:(P_DATAIN_DT|REQI|BSYI|ATNI) SCSIPHASE[0x0]
Jun 28 12:00:01 localhost kernel: SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
Jun 28 12:00:01 localhost kernel: SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
Jun 28 12:00:01 localhost kernel: SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0]
Jun 28 12:00:01 localhost kernel: QFREEZE_COUNT[0x2] KERNEL_QFREEZE_COUNT[0x2] MK_MESSAGE_SCB[0xff00]
Jun 28 12:00:01 localhost kernel: MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|P
HASEMIS)
Jun 28 12:00:01 localhost kernel: SSTAT2[0x20]:(NONPACKREQ) SSTAT3[0x0] PERRDIAG[0x0]
Jun 28 12:00:01 localhost kernel: SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
Jun 28 12:00:01 localhost kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0xc0]:(LQIPHASE_OUTPKT|PACKETIZED)
Jun 28 12:00:01 localhost kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
Jun 28 12:00:01 localhost kernel:
Jun 28 12:00:01 localhost kernel: SCB Count = 64 CMDS_PENDING = 2 LASTSCB 0x1e CURRSCB 0x25 NEXTSCB 0xff80
Jun 28 12:00:01 localhost kernel: qinstart = 25641 qinfifonext = 25641
Jun 28 12:00:01 localhost kernel: QINFIFO:
Jun 28 12:00:01 localhost kernel: WAITING_TID_QUEUES:
Jun 28 12:00:01 localhost kernel: Pending list:
Jun 28 12:00:01 localhost kernel: 37 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]
Jun 28 12:00:01 localhost kernel: 49 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
Jun 28 12:00:01 localhost kernel: Total 2
Jun 28 12:00:01 localhost kernel: Kernel Free SCB list: 30 0 47 6 20 5 28 23 48 61 22 16 62 58 50 9 43 21 52 51
4 63 32 10 36 2 11 40 60 31 12 42 35 8 46 19 54 57 3 34 55 39 38 24 33 41 14 15 25 26 29 1 18 44 59 53 45 56 2
7 17 13 7
Jun 28 12:00:01 localhost kernel: Sequencer Complete DMA-inprog list:
Jun 28 12:00:01 localhost kernel: Sequencer Complete list:
Jun 28 12:00:01 localhost kernel: Sequencer DMA-Up and Complete list:
Jun 28 12:00:01 localhost kernel: Sequencer On QFreeze and Complete list:
Jun 28 12:00:01 localhost kernel:
Jun 28 12:00:01 localhost kernel:
Jun 28 12:00:01 localhost kernel: scsi0: FIFO0 Active, LONGJMP == 0x252, SCB 0x31
Jun 28 12:00:01 localhost kernel: SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSA
VEPTRS)
Jun 28 12:00:01 localhost kernel: SEQINTSRC[0x60]:(SAVEPTRS|CTXTDONE) DFCNTRL[0x8]:(HDMAEN)
Jun 28 12:00:01 localhost kernel: DFSTATUS[0x81]:(FIFOEMP|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x20]
Jun 28 12:00:01 localhost kernel: SG_STATE[0x3]:(SEGS_AVAIL|LOADING_NEEDED) DFFSXFRCTL[0x0]
Jun 28 12:00:01 localhost kernel: SOFFCNT[0x0] MDFFSTAT[0xe]:(DATAINFIFO|DLZERO|SHVALID)
Jun 28 12:00:01 localhost kernel: SHADDR = 0x0b8731000, SHCNT = 0x1000 HADDR = 0x0b8731000, HCNT = 0x1000
Jun 28 12:00:01 localhost kernel: CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Jun 28 12:00:01 localhost kernel:
Jun 28 12:00:01 localhost kernel: scsi0: FIFO1 Free, LONGJMP == 0x8252, SCB 0x5
Jun 28 12:00:01 localhost kernel: SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSA
VEPTRS)
Jun 28 12:00:01 localhost kernel: SEQINTSRC[0x0] DFCNTRL[0x4]:(DIRECTION) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD
_AVAIL)
Jun 28 12:00:01 localhost kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
Jun 28 12:00:01 localhost kernel: SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Jun 28 12:00:01 localhost kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Jun 28 12:00:01 localhost kernel: LQIN: 0x5 0x0 0x0 0x31 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x2 0x0 0x0 0x
0 0x2 0x0
Jun 28 12:00:01 localhost kernel: scsi0: LQISTATE = 0x2b, LQOSTATE = 0x0, OPTIONMODE = 0x52
Jun 28 12:00:01 localhost kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
Jun 28 12:00:01 localhost kernel: scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
Jun 28 12:00:01 localhost kernel:
Jun 28 12:00:01 localhost kernel: SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
Jun 28 12:00:01 localhost kernel: CCSCBCTL[0x4]:(CCSCBDIR)
Jun 28 12:00:01 localhost kernel: scsi0: REG0 == 0x1e, SINDEX = 0x128, DINDEX = 0x104
Jun 28 12:00:01 localhost kernel: scsi0: SCBPTR == 0x25, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff35
Jun 28 12:00:01 localhost kernel: CDB 28 0 7 76 d4 b9
Jun 28 12:00:01 localhost kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Jun 28 12:00:01 localhost kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Jun 28 12:00:01 localhost kernel: LQICRC_NLQ
Jun 28 12:00:01 localhost kernel: LQIRETRY for LQIPHASE_OUTPKT
Jun 28 12:00:01 localhost kernel: scsi0: Returning to Idle Loop
--
Andrea Carpani <andrea.carpani@criticalpath.net>
Critical Path
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: scsi0: Transmission error detected with SCSI Adaptec AIC-7902 U320
2006-06-29 9:13 scsi0: Transmission error detected with SCSI Adaptec AIC-7902 U320 Andrea Carpani
@ 2006-07-10 10:11 ` Andrea Carpani
0 siblings, 0 replies; 2+ messages in thread
From: Andrea Carpani @ 2006-07-10 10:11 UTC (permalink / raw)
To: linux-scsi
On Thu, 2006-06-29 at 11:13 +0200, Andrea Carpani wrote:
Hello everybody.
Anyone can take a look at this and give me some hints?
Thanks.
> Hello,
>
> I have a server with a weird trashing problem and while investigating on
> this issue I've found a SCSI error happening 1 hour before the trashng
> occours.
>
> Can someone give me info on this kind of problem (I'm not able to
> understand Card State Dump). The server has 2 72Gb disks with one
> partition each mirrored between them with software raid.
>
> Thanks,
>
> The server is
> http://www.tyan.com/products/html/gx28b2881.html
> with B2881G28U4H (Hot-swap U320 SCSI bays)
>
> ======
> root # uname -a
> Linux cp3a 2.6.16.19 #2 SMP Mon Jun 5 19:26:39 CEST 2006 i686 AMD
> Opteron(tm) Processor 244 AuthenticAMD GNU/Linux
>
> ======
> root # cat /proc/scsi/aic79xx/0
> Adaptec AIC79xx driver version: 3.0
> Adaptec AIC7902 Ultra320 SCSI adapter
> aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
> Allocated SCBs: 64, SG List Length: 128
>
> Serial EEPROM:
> 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8
> 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8
> 0x09f4 0x0146 0x2807 0x0010 0xffff 0xffff 0xffff 0xffff
> 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x0430 0xb3f7
>
> Target 0 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Goal: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Curr: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Channel A Target 0 Lun 0 Settings
> Commands Queued 3281550
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 1 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Goal: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Curr: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Channel A Target 1 Lun 0 Settings
> Commands Queued 3280158
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 2 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 3 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 4 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 5 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 6 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 7 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 8 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 9 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 10 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 11 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 12 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 13 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 14 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
> Target 15 Negotiation Settings
> User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
>
> Here is the error:
>
> Jun 28 12:00:01 localhost kernel: scsi0: Transmission error detected
> Jun 28 12:00:01 localhost kernel: LQISTAT1[0x8]:(LQICRCI_NLQ) LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
> Jun 28 12:00:01 localhost kernel: SCSISIGI[0x60]:(P_DATAIN_DT) PERRDIAG[0x4]:(CRCERR)
> Jun 28 12:00:01 localhost kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> Jun 28 12:00:01 localhost kernel: scsi0: Dumping Card State at program address 0x21 Mode 0x33
> Jun 28 12:00:01 localhost kernel: Card was paused
> Jun 28 12:00:01 localhost kernel: INTSTAT[0x8]:(SCSIINT) SELOID[0x1] SELID[0x0] HS_MAILBOX[0x0]
> Jun 28 12:00:01 localhost kernel: INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK) SEQINTSTAT[0x0]
> Jun 28 12:00:01 localhost kernel: SAVED_MODE[0x11] DFFSTAT[0x24]:(CURRFIFO_0|FIFO1FREE)
> Jun 28 12:00:01 localhost kernel: SCSISIGI[0x76]:(P_DATAIN_DT|REQI|BSYI|ATNI) SCSIPHASE[0x0]
> Jun 28 12:00:01 localhost kernel: SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
> Jun 28 12:00:01 localhost kernel: SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
> Jun 28 12:00:01 localhost kernel: SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0]
> Jun 28 12:00:01 localhost kernel: QFREEZE_COUNT[0x2] KERNEL_QFREEZE_COUNT[0x2] MK_MESSAGE_SCB[0xff00]
> Jun 28 12:00:01 localhost kernel: MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|P
> HASEMIS)
> Jun 28 12:00:01 localhost kernel: SSTAT2[0x20]:(NONPACKREQ) SSTAT3[0x0] PERRDIAG[0x0]
> Jun 28 12:00:01 localhost kernel: SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
> Jun 28 12:00:01 localhost kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0xc0]:(LQIPHASE_OUTPKT|PACKETIZED)
> Jun 28 12:00:01 localhost kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
> Jun 28 12:00:01 localhost kernel:
> Jun 28 12:00:01 localhost kernel: SCB Count = 64 CMDS_PENDING = 2 LASTSCB 0x1e CURRSCB 0x25 NEXTSCB 0xff80
> Jun 28 12:00:01 localhost kernel: qinstart = 25641 qinfifonext = 25641
> Jun 28 12:00:01 localhost kernel: QINFIFO:
> Jun 28 12:00:01 localhost kernel: WAITING_TID_QUEUES:
> Jun 28 12:00:01 localhost kernel: Pending list:
> Jun 28 12:00:01 localhost kernel: 37 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]
> Jun 28 12:00:01 localhost kernel: 49 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
> Jun 28 12:00:01 localhost kernel: Total 2
> Jun 28 12:00:01 localhost kernel: Kernel Free SCB list: 30 0 47 6 20 5 28 23 48 61 22 16 62 58 50 9 43 21 52 51
> 4 63 32 10 36 2 11 40 60 31 12 42 35 8 46 19 54 57 3 34 55 39 38 24 33 41 14 15 25 26 29 1 18 44 59 53 45 56 2
> 7 17 13 7
> Jun 28 12:00:01 localhost kernel: Sequencer Complete DMA-inprog list:
> Jun 28 12:00:01 localhost kernel: Sequencer Complete list:
> Jun 28 12:00:01 localhost kernel: Sequencer DMA-Up and Complete list:
> Jun 28 12:00:01 localhost kernel: Sequencer On QFreeze and Complete list:
> Jun 28 12:00:01 localhost kernel:
> Jun 28 12:00:01 localhost kernel:
> Jun 28 12:00:01 localhost kernel: scsi0: FIFO0 Active, LONGJMP == 0x252, SCB 0x31
> Jun 28 12:00:01 localhost kernel: SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSA
> VEPTRS)
> Jun 28 12:00:01 localhost kernel: SEQINTSRC[0x60]:(SAVEPTRS|CTXTDONE) DFCNTRL[0x8]:(HDMAEN)
> Jun 28 12:00:01 localhost kernel: DFSTATUS[0x81]:(FIFOEMP|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x20]
> Jun 28 12:00:01 localhost kernel: SG_STATE[0x3]:(SEGS_AVAIL|LOADING_NEEDED) DFFSXFRCTL[0x0]
> Jun 28 12:00:01 localhost kernel: SOFFCNT[0x0] MDFFSTAT[0xe]:(DATAINFIFO|DLZERO|SHVALID)
> Jun 28 12:00:01 localhost kernel: SHADDR = 0x0b8731000, SHCNT = 0x1000 HADDR = 0x0b8731000, HCNT = 0x1000
> Jun 28 12:00:01 localhost kernel: CCSGCTL[0x10]:(SG_CACHE_AVAIL)
> Jun 28 12:00:01 localhost kernel:
> Jun 28 12:00:01 localhost kernel: scsi0: FIFO1 Free, LONGJMP == 0x8252, SCB 0x5
> Jun 28 12:00:01 localhost kernel: SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSA
> VEPTRS)
> Jun 28 12:00:01 localhost kernel: SEQINTSRC[0x0] DFCNTRL[0x4]:(DIRECTION) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD
> _AVAIL)
> Jun 28 12:00:01 localhost kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
> Jun 28 12:00:01 localhost kernel: SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
> Jun 28 12:00:01 localhost kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
> Jun 28 12:00:01 localhost kernel: LQIN: 0x5 0x0 0x0 0x31 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x2 0x0 0x0 0x
> 0 0x2 0x0
> Jun 28 12:00:01 localhost kernel: scsi0: LQISTATE = 0x2b, LQOSTATE = 0x0, OPTIONMODE = 0x52
> Jun 28 12:00:01 localhost kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
> Jun 28 12:00:01 localhost kernel: scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
> Jun 28 12:00:01 localhost kernel:
> Jun 28 12:00:01 localhost kernel: SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
> Jun 28 12:00:01 localhost kernel: CCSCBCTL[0x4]:(CCSCBDIR)
> Jun 28 12:00:01 localhost kernel: scsi0: REG0 == 0x1e, SINDEX = 0x128, DINDEX = 0x104
> Jun 28 12:00:01 localhost kernel: scsi0: SCBPTR == 0x25, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff35
> Jun 28 12:00:01 localhost kernel: CDB 28 0 7 76 d4 b9
> Jun 28 12:00:01 localhost kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
> Jun 28 12:00:01 localhost kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> Jun 28 12:00:01 localhost kernel: LQICRC_NLQ
> Jun 28 12:00:01 localhost kernel: LQIRETRY for LQIPHASE_OUTPKT
> Jun 28 12:00:01 localhost kernel: scsi0: Returning to Idle Loop
>
>
>
--
Andrea Carpani <andrea.carpani@criticalpath.net>
Critical Path
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-07-10 10:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-29 9:13 scsi0: Transmission error detected with SCSI Adaptec AIC-7902 U320 Andrea Carpani
2006-07-10 10:11 ` Andrea Carpani
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.