* core-image-minimal boot problem
@ 2013-01-13 11:29 Yi Qingliang
2013-01-13 11:35 ` Yi Qingliang
2013-01-13 16:29 ` Yi Qingliang
0 siblings, 2 replies; 5+ messages in thread
From: Yi Qingliang @ 2013-01-13 11:29 UTC (permalink / raw)
To: OE Core mailing list
I have compiled a core-image-minimal running on my s3c2442 board.
both the kernel and barebox are compiled based on mini2440.
the fs is ubifs.
after set rtc, stop several seconds.
and the continue mount rootfs.
when execute sysvinit,
after print "INIT:", stop long time, and then print " version 2.88 booting".
stop long time, print a newline.
stop long time, continue.
and finally, no shell prompt occur.
I have checked sysvinit code, the "INIT:" and "version 2.88 booting" are only
continuous print, it should not pause between them.
I have changed ubifs to cramfs, no luck.
and if I uncheck the s3c nand debug option in kernel configuration,
I can get shell prompt, and login the system, and only that, the boot time no
change.
is there someone can help me?
=====================ATTACHE FILE=================
the serial output is:
booting kernel from /dev/nand0.kernel.bb
commandline: console=ttySAC0,115200 mini2440=0tbc LANG=en_US.UTF-8 ip=dhcp
root=ubi0:arm9plf-rootfs ubi.mtd=3 rootfstype=ubifs noinit
rd mtdparts=nand:768k(barebox),256k(bareboxenv),5M(kernel),-(fs)
arch_number: 1999
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0
Linux version 3.7.2 (ll@ll-pc) (gcc version 4.7.2 (GCC) ) #23 Sun Jan 13
19:14:52 CST 2013
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: NJJL2442
Memory policy: ECC disabled, Data cache writeback
CPU S3C2442B (id 0x32440aab)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttySAC0,115200 mini2440=0tbc LANG=en_US.UTF-8
ip=dhcp root=ubi0:arm9plf-rootfs ubi.mtd=3 rootfstype=ubif
s noinitrd mtdparts=nand:768k(barebox),256k(bareboxenv),5M(kernel),-(fs)
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60440k/60440k available, 5096k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc03f57dc (4022 kB)
.init : 0xc03f6000 - 0xc04170dc ( 133 kB)
.data : 0xc0418000 - 0xc043d720 ( 150 kB)
.bss : 0xc043d744 - 0xc046299c ( 149 kB)
NR_IRQS:85
irq: clearing subpending status 00000002
sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
Console: colour dummy device 80x30
Calibrating delay loop... 201.52 BogoMIPS (lpj=503808)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x3030ab68 - 0x3030abc0
devtmpfs: initialized
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
MINI2440: Option string mini2440=0tbc
MINI2440: 't' ignored, touchscreen not compiled in
MINI2440: LCD [0:240x320] 1:800x480 2:1024x768 3:320x240
S3C2442: Initialising architecture
S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
DMA channel 0 at c4846000, irq 33
DMA channel 1 at c4846040, irq 34
DMA channel 2 at c4846080, irq 35
DMA channel 3 at c48460c0, irq 36
S3C244X: Clock Support, DVS off
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (extended precision)
NTFS driver 2.1.30 [Flags: R/O].
fuse init (API version 7.20)
msgmni has been set to 118
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 30x40
s3c2410-lcd s3c2410-lcd: fb0: s3c2410fb frame buffer device
s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
console [ttySAC0] enabled
s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
brd: module loaded
loop: module loaded
s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns
s3c24xx-nand s3c2440-nand: NAND hardware ECC
NAND device: Manufacturer ID: 0xec, Chip ID: 0xa1 (Samsung NAND 128MiB 1,8V 8-
bit), page size: 2048, OOB size: 64
Scanning device for bad blocks
4 cmdlinepart partitions found on MTD device nand
Creating 4 MTD partitions on "nand":
0x000000000000-0x0000000c0000 : "barebox"
0x0000000c0000-0x000000100000 : "bareboxenv"
0x000000100000-0x000000600000 : "kernel"
0x000000600000-0x000008000000 : "fs"
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
mousedev: PS/2 mouse device common for all mice
s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
s3c-rtc s3c2410-rtc: warning: invalid RTC value so initializing it
i2c /dev entries driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
UBI: attaching mtd3 to ubi0
UBI: scanning is finished
UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB
handling, reserved 9, need 20
UBI: attached mtd3 (name "fs", size 122 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
UBI: VID header offset: 512 (aligned 512), data offset: 2048
UBI: good PEBs: 976, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 0
UBI: available PEBs: 0, total reserved PEBs: 976, PEBs reserved for bad PEB
handling: 9
UBI: background thread "ubi_bgt0d" started, PID 883
s3c-rtc s3c2410-rtc: setting system clock to 2000-01-01 00:00:00 UTC
(946684800)
<<<<<<<<<<<<<<<<<<< stop some time <<<<<<<<<<<<<<
UBIFS: background thread "ubifs_bgt0_0" started, PID 886
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "arm9plf-rootfs"(null)
UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048
bytes/2048 bytes
UBIFS: FS size: 8773632 bytes (8 MiB, 68 LEBs), journal size 1548288 bytes (1
MiB, 12 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0D0C24B9-21D9-4769-
B340-93B91C783DC3, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing init memory: 132K
INIT:
<<<<<<<<<<<<<<<<<<< pause long time <<<<<<<<<<<<<<
version 2.88 booting
<<<<<<<<<<<<<<<<<<< pause long time <<<<<<<<<<<<<<
INIT: Running /etc/rcS.d/S02banner.sh start...
INIT: Running /etc/rcS.d/S02sysfs.sh start...
INIT: Running /etc/rcS.d/S03udev start...
Starting udev
udevd[904]: starting version 182
INIT: Running /etc/rcS.d/S04modutils.sh start...
INIT: Running /etc/rcS.d/S06alignment.sh start...
INIT: Running /etc/rcS.d/S07bootlogd start...
Starting Bootlog daemon: bootlogd.
INIT: Running /etc/rcS.d/S10checkroot.sh start...
Activating swap
INIT: Running /etc/rcS.d/S35mountall.sh start...
Mounting local filesystems...
INIT: Running /etc/rcS.d/S37populate-volatile.sh start...
Populating volatile Filesystems.
INIT: Running /etc/rcS.d/S38devpts.sh start...
INIT: Running /etc/rcS.d/S39hostname.sh start...
INIT: Running /etc/rcS.d/S40networking start...
Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
INIT: Running /etc/rcS.d/S45mountnfs.sh start...
INIT: Running /etc/rcS.d/S55bootmisc.sh start...
System time was Sat Jan 1 00:01:54 UTC 2000.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Sat Jan 1 00:01:54 UTC 2000.
Sun Jan 13 10:42:00 UTC 2013
Saving the System Clock time to the Hardware Clock...
Hardware Clock updated to Sun Jan 13 10:42:00 UTC 2013.
INIT: Entering runlevel: 5
INIT: Running /etc/rc5.d/S20hwclock.sh start...
System time was Sun Jan 13 10:42:00 UTC 2013.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Sun Jan 13 10:42:00 UTC 2013.
INIT: Running /etc/rc5.d/S20syslog start...
Starting syslogd/klogd: done
INIT: Running /etc/rc5.d/S99rmnologin.sh start...
INIT: Running /etc/rc5.d/S99stop-bootlogd start...
Stopping Bootlog daemon: bootlogd.
PANGU (Built by optimus 1.0) 1.3+snapshot-20130113 arm9plf ttySAC0
<<<<<<<<<<<<<<<< no shell prompt <<<<<<<<<<<<<<<<<
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: core-image-minimal boot problem
2013-01-13 11:29 core-image-minimal boot problem Yi Qingliang
@ 2013-01-13 11:35 ` Yi Qingliang
2013-01-13 16:29 ` Yi Qingliang
1 sibling, 0 replies; 5+ messages in thread
From: Yi Qingliang @ 2013-01-13 11:35 UTC (permalink / raw)
To: OE Core mailing list
On Sunday, January 13, 2013 07:29:52 PM you wrote:
> I have compiled a core-image-minimal running on my s3c2442 board.
> both the kernel and barebox are compiled based on mini2440.
>
> the fs is ubifs.
>
> after set rtc, stop several seconds.
> and the continue mount rootfs.
> when execute sysvinit,
> after print "INIT:", stop long time, and then print " version 2.88 booting".
> stop long time, print a newline.
> stop long time, continue.
> and finally, no shell prompt occur.
>
> I have checked sysvinit code, the "INIT:" and "version 2.88 booting" are
> only continuous print, it should not pause between them.
>
> I have changed ubifs to cramfs, no luck.
> and if I uncheck the s3c nand debug option in kernel configuration,
> I can get shell prompt, and login the system, and only that, the boot time
> no change.
sorry, it should be:
if I [check] the s3c nand debug option in kernel configuration,
I can get log in system.
>
> is there someone can help me?
>
>
>
> =====================ATTACHE FILE=================
>
>
> the serial output is:
>
> booting kernel from /dev/nand0.kernel.bb
> commandline: console=ttySAC0,115200 mini2440=0tbc LANG=en_US.UTF-8 ip=dhcp
> root=ubi0:arm9plf-rootfs ubi.mtd=3 rootfstype=ubifs noinit
> rd mtdparts=nand:768k(barebox),256k(bareboxenv),5M(kernel),-(fs)
> arch_number: 1999
> Uncompressing Linux... done, booting the kernel.
> Booting Linux on physical CPU 0
> Linux version 3.7.2 (ll@ll-pc) (gcc version 4.7.2 (GCC) ) #23 Sun Jan 13
> 19:14:52 CST 2013
> CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
> CPU: VIVT data cache, VIVT instruction cache
> Machine: NJJL2442
> Memory policy: ECC disabled, Data cache writeback
> CPU S3C2442B (id 0x32440aab)
> S3C24XX Clocks, Copyright 2004 Simtec Electronics
> S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
> CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
> Kernel command line: console=ttySAC0,115200 mini2440=0tbc LANG=en_US.UTF-8
> ip=dhcp root=ubi0:arm9plf-rootfs ubi.mtd=3 rootfstype=ubif
> s noinitrd mtdparts=nand:768k(barebox),256k(bareboxenv),5M(kernel),-(fs)
> PID hash table entries: 256 (order: -2, 1024 bytes)
> Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Memory: 64MB = 64MB total
> Memory: 60440k/60440k available, 5096k reserved, 0K highmem
> Virtual kernel memory layout:
> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
> lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
> modules : 0xbf000000 - 0xc0000000 ( 16 MB)
> .text : 0xc0008000 - 0xc03f57dc (4022 kB)
> .init : 0xc03f6000 - 0xc04170dc ( 133 kB)
> .data : 0xc0418000 - 0xc043d720 ( 150 kB)
> .bss : 0xc043d744 - 0xc046299c ( 149 kB)
> NR_IRQS:85
> irq: clearing subpending status 00000002
> sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every
> 4294967291ms Console: colour dummy device 80x30
> Calibrating delay loop... 201.52 BogoMIPS (lpj=503808)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 512
> CPU: Testing write buffer coherency: ok
> Setting up static identity map for 0x3030ab68 - 0x3030abc0
> devtmpfs: initialized
> NET: Registered protocol family 16
> DMA: preallocated 256 KiB pool for atomic coherent allocations
> MINI2440: Option string mini2440=0tbc
> MINI2440: 't' ignored, touchscreen not compiled in
> MINI2440: LCD [0:240x320] 1:800x480 2:1024x768 3:320x240
> S3C2442: Initialising architecture
> S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
> DMA channel 0 at c4846000, irq 33
> DMA channel 1 at c4846040, irq 34
> DMA channel 2 at c4846080, irq 35
> DMA channel 3 at c48460c0, irq 36
> S3C244X: Clock Support, DVS off
> bio: create slab <bio-0> at 0
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> NET: Registered protocol family 2
> TCP established hash table entries: 2048 (order: 2, 16384 bytes)
> TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
> TCP: Hash tables configured (established 2048 bind 2048)
> TCP: reno registered
> UDP hash table entries: 256 (order: 0, 4096 bytes)
> UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> NET: Registered protocol family 1
> NetWinder Floating Point Emulator V0.97 (extended precision)
> NTFS driver 2.1.30 [Flags: R/O].
> fuse init (API version 7.20)
> msgmni has been set to 118
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> Console: switching to colour frame buffer device 30x40
> s3c2410-lcd s3c2410-lcd: fb0: s3c2410fb frame buffer device
> s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
> console [ttySAC0] enabled
> s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
> s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
> brd: module loaded
> loop: module loaded
> s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns
> s3c24xx-nand s3c2440-nand: NAND hardware ECC
> NAND device: Manufacturer ID: 0xec, Chip ID: 0xa1 (Samsung NAND 128MiB 1,8V
> 8- bit), page size: 2048, OOB size: 64
> Scanning device for bad blocks
> 4 cmdlinepart partitions found on MTD device nand
> Creating 4 MTD partitions on "nand":
> 0x000000000000-0x0000000c0000 : "barebox"
> 0x0000000c0000-0x000000100000 : "bareboxenv"
> 0x000000100000-0x000000600000 : "kernel"
> 0x000000600000-0x000008000000 : "fs"
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> mousedev: PS/2 mouse device common for all mice
> s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
> s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
> s3c-rtc s3c2410-rtc: warning: invalid RTC value so initializing it
> i2c /dev entries driver
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> TCP: cubic registered
> NET: Registered protocol family 17
> UBI: attaching mtd3 to ubi0
> UBI: scanning is finished
> UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB
> handling, reserved 9, need 20
> UBI: attached mtd3 (name "fs", size 122 MiB) to ubi0
> UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
> UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
> UBI: VID header offset: 512 (aligned 512), data offset: 2048
> UBI: good PEBs: 976, bad PEBs: 0, corrupted PEBs: 0
> UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
> UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number:
> 0 UBI: available PEBs: 0, total reserved PEBs: 976, PEBs reserved for bad
> PEB handling: 9
> UBI: background thread "ubi_bgt0d" started, PID 883
> s3c-rtc s3c2410-rtc: setting system clock to 2000-01-01 00:00:00 UTC
> (946684800)
>
> <<<<<<<<<<<<<<<<<<< stop some time <<<<<<<<<<<<<<
>
> UBIFS: background thread "ubifs_bgt0_0" started, PID 886
> UBIFS: recovery needed
> UBIFS: recovery completed
> UBIFS: mounted UBI device 0, volume 0, name "arm9plf-rootfs"(null)
> UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048
> bytes/2048 bytes
> UBIFS: FS size: 8773632 bytes (8 MiB, 68 LEBs), journal size 1548288 bytes
> (1 MiB, 12 LEBs)
> UBIFS: reserved for root: 0 bytes (0 KiB)
> UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0D0C24B9-21D9-4769-
> B340-93B91C783DC3, small LPT model
> VFS: Mounted root (ubifs filesystem) on device 0:10.
> devtmpfs: mounted
> Freeing init memory: 132K
> INIT:
> <<<<<<<<<<<<<<<<<<< pause long time <<<<<<<<<<<<<<
> version 2.88 booting
> <<<<<<<<<<<<<<<<<<< pause long time <<<<<<<<<<<<<<
>
> INIT: Running /etc/rcS.d/S02banner.sh start...
> INIT: Running /etc/rcS.d/S02sysfs.sh start...
> INIT: Running /etc/rcS.d/S03udev start...
> Starting udev
> udevd[904]: starting version 182
> INIT: Running /etc/rcS.d/S04modutils.sh start...
> INIT: Running /etc/rcS.d/S06alignment.sh start...
> INIT: Running /etc/rcS.d/S07bootlogd start...
> Starting Bootlog daemon: bootlogd.
> INIT: Running /etc/rcS.d/S10checkroot.sh start...
> Activating swap
> INIT: Running /etc/rcS.d/S35mountall.sh start...
> Mounting local filesystems...
> INIT: Running /etc/rcS.d/S37populate-volatile.sh start...
> Populating volatile Filesystems.
> INIT: Running /etc/rcS.d/S38devpts.sh start...
> INIT: Running /etc/rcS.d/S39hostname.sh start...
> INIT: Running /etc/rcS.d/S40networking start...
> Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
> INIT: Running /etc/rcS.d/S45mountnfs.sh start...
> INIT: Running /etc/rcS.d/S55bootmisc.sh start...
> System time was Sat Jan 1 00:01:54 UTC 2000.
> Setting the System Clock using the Hardware Clock as reference...
> System Clock set. System local time is now Sat Jan 1 00:01:54 UTC 2000.
> Sun Jan 13 10:42:00 UTC 2013
> Saving the System Clock time to the Hardware Clock...
> Hardware Clock updated to Sun Jan 13 10:42:00 UTC 2013.
> INIT: Entering runlevel: 5
> INIT: Running /etc/rc5.d/S20hwclock.sh start...
> System time was Sun Jan 13 10:42:00 UTC 2013.
> Setting the System Clock using the Hardware Clock as reference...
> System Clock set. System local time is now Sun Jan 13 10:42:00 UTC 2013.
> INIT: Running /etc/rc5.d/S20syslog start...
> Starting syslogd/klogd: done
> INIT: Running /etc/rc5.d/S99rmnologin.sh start...
> INIT: Running /etc/rc5.d/S99stop-bootlogd start...
> Stopping Bootlog daemon: bootlogd.
>
> PANGU (Built by optimus 1.0) 1.3+snapshot-20130113 arm9plf ttySAC0
>
> <<<<<<<<<<<<<<<< no shell prompt <<<<<<<<<<<<<<<<<
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: core-image-minimal boot problem
2013-01-13 11:29 core-image-minimal boot problem Yi Qingliang
2013-01-13 11:35 ` Yi Qingliang
@ 2013-01-13 16:29 ` Yi Qingliang
2013-01-14 7:23 ` Yi Qingliang
1 sibling, 1 reply; 5+ messages in thread
From: Yi Qingliang @ 2013-01-13 16:29 UTC (permalink / raw)
To: OE Core mailing list
can you give some suggestions?
I have struggled on it for 4days with a big headache.:(
On Sunday, January 13, 2013 07:29:52 PM Yi Qingliang wrote:
> I have compiled a core-image-minimal running on my s3c2442 board.
> both the kernel and barebox are compiled based on mini2440.
>
> the fs is ubifs.
>
> after set rtc, stop several seconds.
> and the continue mount rootfs.
> when execute sysvinit,
> after print "INIT:", stop long time, and then print " version 2.88 booting".
> stop long time, print a newline.
> stop long time, continue.
> and finally, no shell prompt occur.
>
> I have checked sysvinit code, the "INIT:" and "version 2.88 booting" are
> only continuous print, it should not pause between them.
>
> I have changed ubifs to cramfs, no luck.
> and if I uncheck the s3c nand debug option in kernel configuration,
> I can get shell prompt, and login the system, and only that, the boot time
> no change.
>
> is there someone can help me?
>
>
>
> =====================ATTACHE FILE=================
>
>
> the serial output is:
>
> booting kernel from /dev/nand0.kernel.bb
> commandline: console=ttySAC0,115200 mini2440=0tbc LANG=en_US.UTF-8 ip=dhcp
> root=ubi0:arm9plf-rootfs ubi.mtd=3 rootfstype=ubifs noinit
> rd mtdparts=nand:768k(barebox),256k(bareboxenv),5M(kernel),-(fs)
> arch_number: 1999
> Uncompressing Linux... done, booting the kernel.
> Booting Linux on physical CPU 0
> Linux version 3.7.2 (ll@ll-pc) (gcc version 4.7.2 (GCC) ) #23 Sun Jan 13
> 19:14:52 CST 2013
> CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
> CPU: VIVT data cache, VIVT instruction cache
> Machine: NJJL2442
> Memory policy: ECC disabled, Data cache writeback
> CPU S3C2442B (id 0x32440aab)
> S3C24XX Clocks, Copyright 2004 Simtec Electronics
> S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
> CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
> Kernel command line: console=ttySAC0,115200 mini2440=0tbc LANG=en_US.UTF-8
> ip=dhcp root=ubi0:arm9plf-rootfs ubi.mtd=3 rootfstype=ubif
> s noinitrd mtdparts=nand:768k(barebox),256k(bareboxenv),5M(kernel),-(fs)
> PID hash table entries: 256 (order: -2, 1024 bytes)
> Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Memory: 64MB = 64MB total
> Memory: 60440k/60440k available, 5096k reserved, 0K highmem
> Virtual kernel memory layout:
> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
> lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
> modules : 0xbf000000 - 0xc0000000 ( 16 MB)
> .text : 0xc0008000 - 0xc03f57dc (4022 kB)
> .init : 0xc03f6000 - 0xc04170dc ( 133 kB)
> .data : 0xc0418000 - 0xc043d720 ( 150 kB)
> .bss : 0xc043d744 - 0xc046299c ( 149 kB)
> NR_IRQS:85
> irq: clearing subpending status 00000002
> sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every
> 4294967291ms Console: colour dummy device 80x30
> Calibrating delay loop... 201.52 BogoMIPS (lpj=503808)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 512
> CPU: Testing write buffer coherency: ok
> Setting up static identity map for 0x3030ab68 - 0x3030abc0
> devtmpfs: initialized
> NET: Registered protocol family 16
> DMA: preallocated 256 KiB pool for atomic coherent allocations
> MINI2440: Option string mini2440=0tbc
> MINI2440: 't' ignored, touchscreen not compiled in
> MINI2440: LCD [0:240x320] 1:800x480 2:1024x768 3:320x240
> S3C2442: Initialising architecture
> S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
> DMA channel 0 at c4846000, irq 33
> DMA channel 1 at c4846040, irq 34
> DMA channel 2 at c4846080, irq 35
> DMA channel 3 at c48460c0, irq 36
> S3C244X: Clock Support, DVS off
> bio: create slab <bio-0> at 0
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> NET: Registered protocol family 2
> TCP established hash table entries: 2048 (order: 2, 16384 bytes)
> TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
> TCP: Hash tables configured (established 2048 bind 2048)
> TCP: reno registered
> UDP hash table entries: 256 (order: 0, 4096 bytes)
> UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> NET: Registered protocol family 1
> NetWinder Floating Point Emulator V0.97 (extended precision)
> NTFS driver 2.1.30 [Flags: R/O].
> fuse init (API version 7.20)
> msgmni has been set to 118
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> Console: switching to colour frame buffer device 30x40
> s3c2410-lcd s3c2410-lcd: fb0: s3c2410fb frame buffer device
> s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
> console [ttySAC0] enabled
> s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
> s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
> brd: module loaded
> loop: module loaded
> s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns
> s3c24xx-nand s3c2440-nand: NAND hardware ECC
> NAND device: Manufacturer ID: 0xec, Chip ID: 0xa1 (Samsung NAND 128MiB 1,8V
> 8- bit), page size: 2048, OOB size: 64
> Scanning device for bad blocks
> 4 cmdlinepart partitions found on MTD device nand
> Creating 4 MTD partitions on "nand":
> 0x000000000000-0x0000000c0000 : "barebox"
> 0x0000000c0000-0x000000100000 : "bareboxenv"
> 0x000000100000-0x000000600000 : "kernel"
> 0x000000600000-0x000008000000 : "fs"
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> mousedev: PS/2 mouse device common for all mice
> s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
> s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
> s3c-rtc s3c2410-rtc: warning: invalid RTC value so initializing it
> i2c /dev entries driver
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> TCP: cubic registered
> NET: Registered protocol family 17
> UBI: attaching mtd3 to ubi0
> UBI: scanning is finished
> UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB
> handling, reserved 9, need 20
> UBI: attached mtd3 (name "fs", size 122 MiB) to ubi0
> UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
> UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
> UBI: VID header offset: 512 (aligned 512), data offset: 2048
> UBI: good PEBs: 976, bad PEBs: 0, corrupted PEBs: 0
> UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
> UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number:
> 0 UBI: available PEBs: 0, total reserved PEBs: 976, PEBs reserved for bad
> PEB handling: 9
> UBI: background thread "ubi_bgt0d" started, PID 883
> s3c-rtc s3c2410-rtc: setting system clock to 2000-01-01 00:00:00 UTC
> (946684800)
>
> <<<<<<<<<<<<<<<<<<< stop some time <<<<<<<<<<<<<<
>
> UBIFS: background thread "ubifs_bgt0_0" started, PID 886
> UBIFS: recovery needed
> UBIFS: recovery completed
> UBIFS: mounted UBI device 0, volume 0, name "arm9plf-rootfs"(null)
> UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048
> bytes/2048 bytes
> UBIFS: FS size: 8773632 bytes (8 MiB, 68 LEBs), journal size 1548288 bytes
> (1 MiB, 12 LEBs)
> UBIFS: reserved for root: 0 bytes (0 KiB)
> UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0D0C24B9-21D9-4769-
> B340-93B91C783DC3, small LPT model
> VFS: Mounted root (ubifs filesystem) on device 0:10.
> devtmpfs: mounted
> Freeing init memory: 132K
> INIT:
> <<<<<<<<<<<<<<<<<<< pause long time <<<<<<<<<<<<<<
> version 2.88 booting
> <<<<<<<<<<<<<<<<<<< pause long time <<<<<<<<<<<<<<
>
> INIT: Running /etc/rcS.d/S02banner.sh start...
> INIT: Running /etc/rcS.d/S02sysfs.sh start...
> INIT: Running /etc/rcS.d/S03udev start...
> Starting udev
> udevd[904]: starting version 182
> INIT: Running /etc/rcS.d/S04modutils.sh start...
> INIT: Running /etc/rcS.d/S06alignment.sh start...
> INIT: Running /etc/rcS.d/S07bootlogd start...
> Starting Bootlog daemon: bootlogd.
> INIT: Running /etc/rcS.d/S10checkroot.sh start...
> Activating swap
> INIT: Running /etc/rcS.d/S35mountall.sh start...
> Mounting local filesystems...
> INIT: Running /etc/rcS.d/S37populate-volatile.sh start...
> Populating volatile Filesystems.
> INIT: Running /etc/rcS.d/S38devpts.sh start...
> INIT: Running /etc/rcS.d/S39hostname.sh start...
> INIT: Running /etc/rcS.d/S40networking start...
> Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
> INIT: Running /etc/rcS.d/S45mountnfs.sh start...
> INIT: Running /etc/rcS.d/S55bootmisc.sh start...
> System time was Sat Jan 1 00:01:54 UTC 2000.
> Setting the System Clock using the Hardware Clock as reference...
> System Clock set. System local time is now Sat Jan 1 00:01:54 UTC 2000.
> Sun Jan 13 10:42:00 UTC 2013
> Saving the System Clock time to the Hardware Clock...
> Hardware Clock updated to Sun Jan 13 10:42:00 UTC 2013.
> INIT: Entering runlevel: 5
> INIT: Running /etc/rc5.d/S20hwclock.sh start...
> System time was Sun Jan 13 10:42:00 UTC 2013.
> Setting the System Clock using the Hardware Clock as reference...
> System Clock set. System local time is now Sun Jan 13 10:42:00 UTC 2013.
> INIT: Running /etc/rc5.d/S20syslog start...
> Starting syslogd/klogd: done
> INIT: Running /etc/rc5.d/S99rmnologin.sh start...
> INIT: Running /etc/rc5.d/S99stop-bootlogd start...
> Stopping Bootlog daemon: bootlogd.
>
> PANGU (Built by optimus 1.0) 1.3+snapshot-20130113 arm9plf ttySAC0
>
> <<<<<<<<<<<<<<<< no shell prompt <<<<<<<<<<<<<<<<<
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: core-image-minimal boot problem
2013-01-13 16:29 ` Yi Qingliang
@ 2013-01-14 7:23 ` Yi Qingliang
2013-01-15 3:19 ` Yi Qingliang
0 siblings, 1 reply; 5+ messages in thread
From: Yi Qingliang @ 2013-01-14 7:23 UTC (permalink / raw)
To: OE Core mailing list
[-- Attachment #1: Type: text/plain, Size: 10862 bytes --]
I have got something,
after change the "DEBUG" to "1" in sysvinit/src/init.h, the pause between
and after INIT: version 2.88 booting missed.
add -i to the /sbin/agetty line in /etc/inittab, I got the login prompt,
(it mean do not display issue).
but, but, what's the problem.
On Sun, Jan 13, 2013 at 4:29 PM, Yi Qingliang <niqingliang2003@gmail.com>wrote:
> can you give some suggestions?
> I have struggled on it for 4days with a big headache.:(
>
> On Sunday, January 13, 2013 07:29:52 PM Yi Qingliang wrote:
> > I have compiled a core-image-minimal running on my s3c2442 board.
> > both the kernel and barebox are compiled based on mini2440.
> >
> > the fs is ubifs.
> >
> > after set rtc, stop several seconds.
> > and the continue mount rootfs.
> > when execute sysvinit,
> > after print "INIT:", stop long time, and then print " version 2.88
> booting".
> > stop long time, print a newline.
> > stop long time, continue.
> > and finally, no shell prompt occur.
> >
> > I have checked sysvinit code, the "INIT:" and "version 2.88 booting" are
> > only continuous print, it should not pause between them.
> >
> > I have changed ubifs to cramfs, no luck.
> > and if I uncheck the s3c nand debug option in kernel configuration,
> > I can get shell prompt, and login the system, and only that, the boot
> time
> > no change.
> >
> > is there someone can help me?
> >
> >
> >
> > =====================ATTACHE FILE=================
> >
> >
> > the serial output is:
> >
> > booting kernel from /dev/nand0.kernel.bb
> > commandline: console=ttySAC0,115200 mini2440=0tbc LANG=en_US.UTF-8
> ip=dhcp
> > root=ubi0:arm9plf-rootfs ubi.mtd=3 rootfstype=ubifs noinit
> > rd mtdparts=nand:768k(barebox),256k(bareboxenv),5M(kernel),-(fs)
> > arch_number: 1999
> > Uncompressing Linux... done, booting the kernel.
> > Booting Linux on physical CPU 0
> > Linux version 3.7.2 (ll@ll-pc) (gcc version 4.7.2 (GCC) ) #23 Sun Jan 13
> > 19:14:52 CST 2013
> > CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
> > CPU: VIVT data cache, VIVT instruction cache
> > Machine: NJJL2442
> > Memory policy: ECC disabled, Data cache writeback
> > CPU S3C2442B (id 0x32440aab)
> > S3C24XX Clocks, Copyright 2004 Simtec Electronics
> > S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
> > CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
> > Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> 16256
> > Kernel command line: console=ttySAC0,115200 mini2440=0tbc
> LANG=en_US.UTF-8
> > ip=dhcp root=ubi0:arm9plf-rootfs ubi.mtd=3 rootfstype=ubif
> > s noinitrd mtdparts=nand:768k(barebox),256k(bareboxenv),5M(kernel),-(fs)
> > PID hash table entries: 256 (order: -2, 1024 bytes)
> > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> > Memory: 64MB = 64MB total
> > Memory: 60440k/60440k available, 5096k reserved, 0K highmem
> > Virtual kernel memory layout:
> > vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> > fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> > vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
> > lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
> > modules : 0xbf000000 - 0xc0000000 ( 16 MB)
> > .text : 0xc0008000 - 0xc03f57dc (4022 kB)
> > .init : 0xc03f6000 - 0xc04170dc ( 133 kB)
> > .data : 0xc0418000 - 0xc043d720 ( 150 kB)
> > .bss : 0xc043d744 - 0xc046299c ( 149 kB)
> > NR_IRQS:85
> > irq: clearing subpending status 00000002
> > sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every
> > 4294967291ms Console: colour dummy device 80x30
> > Calibrating delay loop... 201.52 BogoMIPS (lpj=503808)
> > pid_max: default: 32768 minimum: 301
> > Mount-cache hash table entries: 512
> > CPU: Testing write buffer coherency: ok
> > Setting up static identity map for 0x3030ab68 - 0x3030abc0
> > devtmpfs: initialized
> > NET: Registered protocol family 16
> > DMA: preallocated 256 KiB pool for atomic coherent allocations
> > MINI2440: Option string mini2440=0tbc
> > MINI2440: 't' ignored, touchscreen not compiled in
> > MINI2440: LCD [0:240x320] 1:800x480 2:1024x768 3:320x240
> > S3C2442: Initialising architecture
> > S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
> > DMA channel 0 at c4846000, irq 33
> > DMA channel 1 at c4846040, irq 34
> > DMA channel 2 at c4846080, irq 35
> > DMA channel 3 at c48460c0, irq 36
> > S3C244X: Clock Support, DVS off
> > bio: create slab <bio-0> at 0
> > SCSI subsystem initialized
> > usbcore: registered new interface driver usbfs
> > usbcore: registered new interface driver hub
> > usbcore: registered new device driver usb
> > NET: Registered protocol family 2
> > TCP established hash table entries: 2048 (order: 2, 16384 bytes)
> > TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
> > TCP: Hash tables configured (established 2048 bind 2048)
> > TCP: reno registered
> > UDP hash table entries: 256 (order: 0, 4096 bytes)
> > UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> > NET: Registered protocol family 1
> > NetWinder Floating Point Emulator V0.97 (extended precision)
> > NTFS driver 2.1.30 [Flags: R/O].
> > fuse init (API version 7.20)
> > msgmni has been set to 118
> > io scheduler noop registered
> > io scheduler deadline registered
> > io scheduler cfq registered (default)
> > Console: switching to colour frame buffer device 30x40
> > s3c2410-lcd s3c2410-lcd: fb0: s3c2410fb frame buffer device
> > s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
> > console [ttySAC0] enabled
> > s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
> > s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
> > brd: module loaded
> > loop: module loaded
> > s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns
> > s3c24xx-nand s3c2440-nand: NAND hardware ECC
> > NAND device: Manufacturer ID: 0xec, Chip ID: 0xa1 (Samsung NAND 128MiB
> 1,8V
> > 8- bit), page size: 2048, OOB size: 64
> > Scanning device for bad blocks
> > 4 cmdlinepart partitions found on MTD device nand
> > Creating 4 MTD partitions on "nand":
> > 0x000000000000-0x0000000c0000 : "barebox"
> > 0x0000000c0000-0x000000100000 : "bareboxenv"
> > 0x000000100000-0x000000600000 : "kernel"
> > 0x000000600000-0x000008000000 : "fs"
> > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > mousedev: PS/2 mouse device common for all mice
> > s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
> > s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
> > s3c-rtc s3c2410-rtc: warning: invalid RTC value so initializing it
> > i2c /dev entries driver
> > sdhci: Secure Digital Host Controller Interface driver
> > sdhci: Copyright(c) Pierre Ossman
> > usbcore: registered new interface driver usbhid
> > usbhid: USB HID core driver
> > TCP: cubic registered
> > NET: Registered protocol family 17
> > UBI: attaching mtd3 to ubi0
> > UBI: scanning is finished
> > UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB
> > handling, reserved 9, need 20
> > UBI: attached mtd3 (name "fs", size 122 MiB) to ubi0
> > UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
> > UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
> > UBI: VID header offset: 512 (aligned 512), data offset: 2048
> > UBI: good PEBs: 976, bad PEBs: 0, corrupted PEBs: 0
> > UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
> > UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence
> number:
> > 0 UBI: available PEBs: 0, total reserved PEBs: 976, PEBs reserved for bad
> > PEB handling: 9
> > UBI: background thread "ubi_bgt0d" started, PID 883
> > s3c-rtc s3c2410-rtc: setting system clock to 2000-01-01 00:00:00 UTC
> > (946684800)
> >
> > <<<<<<<<<<<<<<<<<<< stop some time <<<<<<<<<<<<<<
> >
> > UBIFS: background thread "ubifs_bgt0_0" started, PID 886
> > UBIFS: recovery needed
> > UBIFS: recovery completed
> > UBIFS: mounted UBI device 0, volume 0, name "arm9plf-rootfs"(null)
> > UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048
> > bytes/2048 bytes
> > UBIFS: FS size: 8773632 bytes (8 MiB, 68 LEBs), journal size 1548288
> bytes
> > (1 MiB, 12 LEBs)
> > UBIFS: reserved for root: 0 bytes (0 KiB)
> > UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0D0C24B9-21D9-4769-
> > B340-93B91C783DC3, small LPT model
> > VFS: Mounted root (ubifs filesystem) on device 0:10.
> > devtmpfs: mounted
> > Freeing init memory: 132K
> > INIT:
> > <<<<<<<<<<<<<<<<<<< pause long time <<<<<<<<<<<<<<
> > version 2.88 booting
> > <<<<<<<<<<<<<<<<<<< pause long time <<<<<<<<<<<<<<
> >
> > INIT: Running /etc/rcS.d/S02banner.sh start...
> > INIT: Running /etc/rcS.d/S02sysfs.sh start...
> > INIT: Running /etc/rcS.d/S03udev start...
> > Starting udev
> > udevd[904]: starting version 182
> > INIT: Running /etc/rcS.d/S04modutils.sh start...
> > INIT: Running /etc/rcS.d/S06alignment.sh start...
> > INIT: Running /etc/rcS.d/S07bootlogd start...
> > Starting Bootlog daemon: bootlogd.
> > INIT: Running /etc/rcS.d/S10checkroot.sh start...
> > Activating swap
> > INIT: Running /etc/rcS.d/S35mountall.sh start...
> > Mounting local filesystems...
> > INIT: Running /etc/rcS.d/S37populate-volatile.sh start...
> > Populating volatile Filesystems.
> > INIT: Running /etc/rcS.d/S38devpts.sh start...
> > INIT: Running /etc/rcS.d/S39hostname.sh start...
> > INIT: Running /etc/rcS.d/S40networking start...
> > Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
> > INIT: Running /etc/rcS.d/S45mountnfs.sh start...
> > INIT: Running /etc/rcS.d/S55bootmisc.sh start...
> > System time was Sat Jan 1 00:01:54 UTC 2000.
> > Setting the System Clock using the Hardware Clock as reference...
> > System Clock set. System local time is now Sat Jan 1 00:01:54 UTC 2000.
> > Sun Jan 13 10:42:00 UTC 2013
> > Saving the System Clock time to the Hardware Clock...
> > Hardware Clock updated to Sun Jan 13 10:42:00 UTC 2013.
> > INIT: Entering runlevel: 5
> > INIT: Running /etc/rc5.d/S20hwclock.sh start...
> > System time was Sun Jan 13 10:42:00 UTC 2013.
> > Setting the System Clock using the Hardware Clock as reference...
> > System Clock set. System local time is now Sun Jan 13 10:42:00 UTC 2013.
> > INIT: Running /etc/rc5.d/S20syslog start...
> > Starting syslogd/klogd: done
> > INIT: Running /etc/rc5.d/S99rmnologin.sh start...
> > INIT: Running /etc/rc5.d/S99stop-bootlogd start...
> > Stopping Bootlog daemon: bootlogd.
> >
> > PANGU (Built by optimus 1.0) 1.3+snapshot-20130113 arm9plf ttySAC0
> >
> > <<<<<<<<<<<<<<<< no shell prompt <<<<<<<<<<<<<<<<<
>
[-- Attachment #2: Type: text/html, Size: 12953 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: core-image-minimal boot problem
2013-01-14 7:23 ` Yi Qingliang
@ 2013-01-15 3:19 ` Yi Qingliang
0 siblings, 0 replies; 5+ messages in thread
From: Yi Qingliang @ 2013-01-15 3:19 UTC (permalink / raw)
To: OE Core mailing list
[-- Attachment #1: Type: text/plain, Size: 11556 bytes --]
I have debugged the sysvinit, found that:
the 30seconds is about close(fd) in function:
void print(char *s) (src/init.c)
and the "close" return 0.
why close will hang for 30seconds?
I asked in sysvinit-devel email list, no response.
anyone can give some suggestion?
THANKS
Nanjing Jilong
Yi Qingliang
On Mon, Jan 14, 2013 at 7:23 AM, Yi Qingliang <niqingliang2003@gmail.com>wrote:
> I have got something,
> after change the "DEBUG" to "1" in sysvinit/src/init.h, the pause between
> and after INIT: version 2.88 booting missed.
> add -i to the /sbin/agetty line in /etc/inittab, I got the login prompt,
> (it mean do not display issue).
> but, but, what's the problem.
>
>
> On Sun, Jan 13, 2013 at 4:29 PM, Yi Qingliang <niqingliang2003@gmail.com>wrote:
>
>> can you give some suggestions?
>> I have struggled on it for 4days with a big headache.:(
>>
>> On Sunday, January 13, 2013 07:29:52 PM Yi Qingliang wrote:
>> > I have compiled a core-image-minimal running on my s3c2442 board.
>> > both the kernel and barebox are compiled based on mini2440.
>> >
>> > the fs is ubifs.
>> >
>> > after set rtc, stop several seconds.
>> > and the continue mount rootfs.
>> > when execute sysvinit,
>> > after print "INIT:", stop long time, and then print " version 2.88
>> booting".
>> > stop long time, print a newline.
>> > stop long time, continue.
>> > and finally, no shell prompt occur.
>> >
>> > I have checked sysvinit code, the "INIT:" and "version 2.88 booting" are
>> > only continuous print, it should not pause between them.
>> >
>> > I have changed ubifs to cramfs, no luck.
>> > and if I uncheck the s3c nand debug option in kernel configuration,
>> > I can get shell prompt, and login the system, and only that, the boot
>> time
>> > no change.
>> >
>> > is there someone can help me?
>> >
>> >
>> >
>> > =====================ATTACHE FILE=================
>> >
>> >
>> > the serial output is:
>> >
>> > booting kernel from /dev/nand0.kernel.bb
>> > commandline: console=ttySAC0,115200 mini2440=0tbc LANG=en_US.UTF-8
>> ip=dhcp
>> > root=ubi0:arm9plf-rootfs ubi.mtd=3 rootfstype=ubifs noinit
>> > rd mtdparts=nand:768k(barebox),256k(bareboxenv),5M(kernel),-(fs)
>> > arch_number: 1999
>> > Uncompressing Linux... done, booting the kernel.
>> > Booting Linux on physical CPU 0
>> > Linux version 3.7.2 (ll@ll-pc) (gcc version 4.7.2 (GCC) ) #23 Sun Jan
>> 13
>> > 19:14:52 CST 2013
>> > CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
>> > CPU: VIVT data cache, VIVT instruction cache
>> > Machine: NJJL2442
>> > Memory policy: ECC disabled, Data cache writeback
>> > CPU S3C2442B (id 0x32440aab)
>> > S3C24XX Clocks, Copyright 2004 Simtec Electronics
>> > S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
>> > CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
>> > Built 1 zonelists in Zone order, mobility grouping on. Total pages:
>> 16256
>> > Kernel command line: console=ttySAC0,115200 mini2440=0tbc
>> LANG=en_US.UTF-8
>> > ip=dhcp root=ubi0:arm9plf-rootfs ubi.mtd=3 rootfstype=ubif
>> > s noinitrd mtdparts=nand:768k(barebox),256k(bareboxenv),5M(kernel),-(fs)
>> > PID hash table entries: 256 (order: -2, 1024 bytes)
>> > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
>> > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
>> > Memory: 64MB = 64MB total
>> > Memory: 60440k/60440k available, 5096k reserved, 0K highmem
>> > Virtual kernel memory layout:
>> > vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>> > fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
>> > vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
>> > lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
>> > modules : 0xbf000000 - 0xc0000000 ( 16 MB)
>> > .text : 0xc0008000 - 0xc03f57dc (4022 kB)
>> > .init : 0xc03f6000 - 0xc04170dc ( 133 kB)
>> > .data : 0xc0418000 - 0xc043d720 ( 150 kB)
>> > .bss : 0xc043d744 - 0xc046299c ( 149 kB)
>> > NR_IRQS:85
>> > irq: clearing subpending status 00000002
>> > sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every
>> > 4294967291ms Console: colour dummy device 80x30
>> > Calibrating delay loop... 201.52 BogoMIPS (lpj=503808)
>> > pid_max: default: 32768 minimum: 301
>> > Mount-cache hash table entries: 512
>> > CPU: Testing write buffer coherency: ok
>> > Setting up static identity map for 0x3030ab68 - 0x3030abc0
>> > devtmpfs: initialized
>> > NET: Registered protocol family 16
>> > DMA: preallocated 256 KiB pool for atomic coherent allocations
>> > MINI2440: Option string mini2440=0tbc
>> > MINI2440: 't' ignored, touchscreen not compiled in
>> > MINI2440: LCD [0:240x320] 1:800x480 2:1024x768 3:320x240
>> > S3C2442: Initialising architecture
>> > S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
>> > DMA channel 0 at c4846000, irq 33
>> > DMA channel 1 at c4846040, irq 34
>> > DMA channel 2 at c4846080, irq 35
>> > DMA channel 3 at c48460c0, irq 36
>> > S3C244X: Clock Support, DVS off
>> > bio: create slab <bio-0> at 0
>> > SCSI subsystem initialized
>> > usbcore: registered new interface driver usbfs
>> > usbcore: registered new interface driver hub
>> > usbcore: registered new device driver usb
>> > NET: Registered protocol family 2
>> > TCP established hash table entries: 2048 (order: 2, 16384 bytes)
>> > TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
>> > TCP: Hash tables configured (established 2048 bind 2048)
>> > TCP: reno registered
>> > UDP hash table entries: 256 (order: 0, 4096 bytes)
>> > UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
>> > NET: Registered protocol family 1
>> > NetWinder Floating Point Emulator V0.97 (extended precision)
>> > NTFS driver 2.1.30 [Flags: R/O].
>> > fuse init (API version 7.20)
>> > msgmni has been set to 118
>> > io scheduler noop registered
>> > io scheduler deadline registered
>> > io scheduler cfq registered (default)
>> > Console: switching to colour frame buffer device 30x40
>> > s3c2410-lcd s3c2410-lcd: fb0: s3c2410fb frame buffer device
>> > s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
>> > console [ttySAC0] enabled
>> > s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
>> > s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
>> > brd: module loaded
>> > loop: module loaded
>> > s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns
>> > s3c24xx-nand s3c2440-nand: NAND hardware ECC
>> > NAND device: Manufacturer ID: 0xec, Chip ID: 0xa1 (Samsung NAND 128MiB
>> 1,8V
>> > 8- bit), page size: 2048, OOB size: 64
>> > Scanning device for bad blocks
>> > 4 cmdlinepart partitions found on MTD device nand
>> > Creating 4 MTD partitions on "nand":
>> > 0x000000000000-0x0000000c0000 : "barebox"
>> > 0x0000000c0000-0x000000100000 : "bareboxenv"
>> > 0x000000100000-0x000000600000 : "kernel"
>> > 0x000000600000-0x000008000000 : "fs"
>> > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> > mousedev: PS/2 mouse device common for all mice
>> > s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
>> > s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
>> > s3c-rtc s3c2410-rtc: warning: invalid RTC value so initializing it
>> > i2c /dev entries driver
>> > sdhci: Secure Digital Host Controller Interface driver
>> > sdhci: Copyright(c) Pierre Ossman
>> > usbcore: registered new interface driver usbhid
>> > usbhid: USB HID core driver
>> > TCP: cubic registered
>> > NET: Registered protocol family 17
>> > UBI: attaching mtd3 to ubi0
>> > UBI: scanning is finished
>> > UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB
>> > handling, reserved 9, need 20
>> > UBI: attached mtd3 (name "fs", size 122 MiB) to ubi0
>> > UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
>> > UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
>> > UBI: VID header offset: 512 (aligned 512), data offset: 2048
>> > UBI: good PEBs: 976, bad PEBs: 0, corrupted PEBs: 0
>> > UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
>> > UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence
>> number:
>> > 0 UBI: available PEBs: 0, total reserved PEBs: 976, PEBs reserved for
>> bad
>> > PEB handling: 9
>> > UBI: background thread "ubi_bgt0d" started, PID 883
>> > s3c-rtc s3c2410-rtc: setting system clock to 2000-01-01 00:00:00 UTC
>> > (946684800)
>> >
>> > <<<<<<<<<<<<<<<<<<< stop some time <<<<<<<<<<<<<<
>> >
>> > UBIFS: background thread "ubifs_bgt0_0" started, PID 886
>> > UBIFS: recovery needed
>> > UBIFS: recovery completed
>> > UBIFS: mounted UBI device 0, volume 0, name "arm9plf-rootfs"(null)
>> > UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048
>> > bytes/2048 bytes
>> > UBIFS: FS size: 8773632 bytes (8 MiB, 68 LEBs), journal size 1548288
>> bytes
>> > (1 MiB, 12 LEBs)
>> > UBIFS: reserved for root: 0 bytes (0 KiB)
>> > UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0D0C24B9-21D9-4769-
>> > B340-93B91C783DC3, small LPT model
>> > VFS: Mounted root (ubifs filesystem) on device 0:10.
>> > devtmpfs: mounted
>> > Freeing init memory: 132K
>> > INIT:
>> > <<<<<<<<<<<<<<<<<<< pause long time <<<<<<<<<<<<<<
>> > version 2.88 booting
>> > <<<<<<<<<<<<<<<<<<< pause long time <<<<<<<<<<<<<<
>> >
>> > INIT: Running /etc/rcS.d/S02banner.sh start...
>> > INIT: Running /etc/rcS.d/S02sysfs.sh start...
>> > INIT: Running /etc/rcS.d/S03udev start...
>> > Starting udev
>> > udevd[904]: starting version 182
>> > INIT: Running /etc/rcS.d/S04modutils.sh start...
>> > INIT: Running /etc/rcS.d/S06alignment.sh start...
>> > INIT: Running /etc/rcS.d/S07bootlogd start...
>> > Starting Bootlog daemon: bootlogd.
>> > INIT: Running /etc/rcS.d/S10checkroot.sh start...
>> > Activating swap
>> > INIT: Running /etc/rcS.d/S35mountall.sh start...
>> > Mounting local filesystems...
>> > INIT: Running /etc/rcS.d/S37populate-volatile.sh start...
>> > Populating volatile Filesystems.
>> > INIT: Running /etc/rcS.d/S38devpts.sh start...
>> > INIT: Running /etc/rcS.d/S39hostname.sh start...
>> > INIT: Running /etc/rcS.d/S40networking start...
>> > Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
>> > INIT: Running /etc/rcS.d/S45mountnfs.sh start...
>> > INIT: Running /etc/rcS.d/S55bootmisc.sh start...
>> > System time was Sat Jan 1 00:01:54 UTC 2000.
>> > Setting the System Clock using the Hardware Clock as reference...
>> > System Clock set. System local time is now Sat Jan 1 00:01:54 UTC 2000.
>> > Sun Jan 13 10:42:00 UTC 2013
>> > Saving the System Clock time to the Hardware Clock...
>> > Hardware Clock updated to Sun Jan 13 10:42:00 UTC 2013.
>> > INIT: Entering runlevel: 5
>> > INIT: Running /etc/rc5.d/S20hwclock.sh start...
>> > System time was Sun Jan 13 10:42:00 UTC 2013.
>> > Setting the System Clock using the Hardware Clock as reference...
>> > System Clock set. System local time is now Sun Jan 13 10:42:00 UTC 2013.
>> > INIT: Running /etc/rc5.d/S20syslog start...
>> > Starting syslogd/klogd: done
>> > INIT: Running /etc/rc5.d/S99rmnologin.sh start...
>> > INIT: Running /etc/rc5.d/S99stop-bootlogd start...
>> > Stopping Bootlog daemon: bootlogd.
>> >
>> > PANGU (Built by optimus 1.0) 1.3+snapshot-20130113 arm9plf ttySAC0
>> >
>> > <<<<<<<<<<<<<<<< no shell prompt <<<<<<<<<<<<<<<<<
>>
>
>
[-- Attachment #2: Type: text/html, Size: 14487 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-01-15 3:34 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-13 11:29 core-image-minimal boot problem Yi Qingliang
2013-01-13 11:35 ` Yi Qingliang
2013-01-13 16:29 ` Yi Qingliang
2013-01-14 7:23 ` Yi Qingliang
2013-01-15 3:19 ` Yi Qingliang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.