* [U-Boot-Users] Redirection via serial port
@ 2007-07-12 5:51 yasosyaso
2007-07-12 7:24 ` Wolfgang Denk
0 siblings, 1 reply; 3+ messages in thread
From: yasosyaso @ 2007-07-12 5:51 UTC (permalink / raw)
To: u-boot
Hi,
I am working in MPC5200B powerpc. I suppose to use UBoot as the bootloader.
I want to know how to redirect stdin, stdout, stderr during boot to serial
port.
Tell me where I have to make the necessary changes in the bootloader.
Regards
Yaso
--
View this message in context: http://www.nabble.com/Redirection-via-serial-port-tf4066233.html#a11554106
Sent from the Uboot - Users mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot-Users] Redirection via serial port
2007-07-12 5:51 [U-Boot-Users] Redirection via serial port yasosyaso
@ 2007-07-12 7:24 ` Wolfgang Denk
0 siblings, 0 replies; 3+ messages in thread
From: Wolfgang Denk @ 2007-07-12 7:24 UTC (permalink / raw)
To: u-boot
In message <11554106.post@talk.nabble.com> you wrote:
>
> I am working in MPC5200B powerpc. I suppose to use UBoot as the bootloader.
> I want to know how to redirect stdin, stdout, stderr during boot to serial
> port.
U-Boot uses the serial port as console by default. No "redirection"
necessary.
> Tell me where I have to make the necessary changes in the bootloader.
You porbably still have to port U-Boot to your board, But that's a
different story.
And please, don't post the same question 5 times...
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"You're just jealous." "What, of an overgrown puppy with a single-
figure IQ?" - Terry Pratchett, _Moving Pictures_
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot-Users] Redirection via serial port
@ 2007-07-12 5:53 yasothabalanr at gmail.com
0 siblings, 0 replies; 3+ messages in thread
From: yasothabalanr at gmail.com @ 2007-07-12 5:53 UTC (permalink / raw)
To: u-boot
Hi,
I am working in MPC5200B powerpc. I suppose to use UBoot as the bootloader.
I want to know how to redirect stdin, stdout, stderr during boot to serial port.
Tell me where I have to make the necessary changes in the bootloader.
Regards
Yaso
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-07-12 7:24 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-07-12 5:51 [U-Boot-Users] Redirection via serial port yasosyaso
2007-07-12 7:24 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2007-07-12 5:53 yasothabalanr at gmail.com
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.