Re: hda_intel ATI SB450 - unknown subsystem ID 1025:009f

[Tobin Davis <tdavis@dsl-only.net>]

[-- Attachment #1.1: Type: text/plain, Size: 2749 bytes --]

I'll try to submit a patch tomorrow.  This is a simple fix.  Glad you
are working now.

On Sun, 2006-09-24 at 21:36 +0200, Stanisław Raczyński wrote:

> After some struggling I finally got it working (with model=acer) with
> your tips. Thanks a lot. I hope the information I provided will
> be somewhat useful -- you might want to put this device ID in the
> sources for future generations. 
> 
> 
> 2006/9/24, Tobin Davis <tdavis@dsl-only.net>:
> 
>         On Sun, 2006-09-24 at 19:22 +0200, Stanisław Raczyński wrote:
>         
>         > I'm using alsa 1.0.11 right now, but I also have tried
>         > 1.0.12 and 1.0.13-rc2. I tried model=acer, but it doesn't
>         > work either.
>         > 
>         > # cat /proc/asound/card0/codec#0
>         > Codec: Realtek ALC883
>         > Address: 0
>         > Vendor Id: 0x10ec0883 
>         > Subsystem Id: 0x1025140d
>         > Revision Id: 0x100002
>         
>         This is supported in 1.0.13rc2.  I can add your specific
>         device ID.  Remember, you need the driver, libs, and utils to
>         be in sync to properly work.  driver 1.0.13rc2 won't work
>         properly with libs 1.0.11, and utils should be rebuilt against
>         the latest libs to properly work as well.  Try building and
>         installing the driver, lib, and utils packages from 1.0.13rc2
>         again.  Build and install each in that order to satisfy
>         dependencies. 
>         
>         Also, for the driver, try configuring like this "./configure
>         --with-debug=detect --with-cards=hda-intel".  This will turn
>         on hda-intel's debugging messages.  Load it with "model=acer"
>         or "model=auto" if acer doesn't work.  In the mean time, I'll
>         parse through the rest of your codec#1 output to see if I see
>         anything relevant. 
>         
>         
>         > 
>         > # cat /proc/asound/card0/codec#1
>         > Codec: Generic 14f1 ID 2bfa
>         > Address: 1
>         > Vendor Id: 0x14f12bfa
>         > Subsystem Id: 0x1025009f
>         > Revision Id: 0x90000
>         
>         This looks like a Conexant modem.  To get support for it,
>         you'll have to go to linuxant.com and buy their driver.
>         
>         
>         > localhost ~ # cat /proc/asound/card0/codec#3 
>         > Codec: Generic ffff ID ffff
>         > Address: 3
>         > Vendor Id: 0xffffffff
>         > Subsystem Id: 0xffffffff 
>         > Revision Id: 0xffffffff
>         
>         This looks like garbage.  Not sure where it's coming from.  
>         
>         -- 
>         Tobin Davis <tdavis@dsl-only.net> 
> 
> 

-- 
Tobin Davis <tdavis@dsl-only.net>

[-- Attachment #1.2: Type: text/html, Size: 4373 bytes --]

[-- Attachment #2: Type: text/plain, Size: 348 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel