hda_intel ATI SB450 - unknown subsystem ID 1025:009f

hda_intel ATI SB450 - unknown subsystem ID 1025:009f

[Stanisław Raczyński]

[-- Attachment #1.1: Type: text/plain, Size: 871 bytes --]

Hello,

It seems to me that the Intel HDA-based audio card on my new Turion64 X2
laptop (Acer Aspire 5102WLMi) is not yet properly
supported. I can't make the alsamixer to start (I tried many different model
settings infor the snd-hda-intel module):

alsamixer: function snd_mixer_load failed: Invalid argument

I was searching through alsa-kernel/pci/hda/patch_realtek.c and
alsa-kernel/Documentation/ALSA-Configuration.txt files and could not find my
model there, but the second file instructed me to post here. Here's the
lspci -nv snippet:

00:14.2 0403: 1002:437b (rev 01)
  Subsystem: 1025:009f
  Flags: bus master, slow devsel, latency 64, IRQ 18
  Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
  Capabilities: [50] Power Management version 2
  Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-

Best wishes,
Stanislaw Raczynski

[-- Attachment #1.2: Type: text/html, Size: 1052 bytes --]

[-- Attachment #2: Type: text/plain, Size: 348 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel

Re: hda_intel ATI SB450 - unknown subsystem ID 1025:009f

[Tobin Davis]

On Sun, 2006-09-24 at 16:02 +0200, Stanisław Raczyński wrote:
> Hello,
> 
> It seems to me that the Intel HDA-based audio card on my new Turion64
> X2 laptop (Acer Aspire 5102WLMi) is not yet properly
> supported. I can't make the alsamixer to start (I tried many different
> model settings infor the snd-hda-intel module): 
> 
> alsamixer: function snd_mixer_load failed: Invalid argument
> 
> I was searching through alsa-kernel/pci/hda/patch_realtek.c and
> alsa-kernel/Documentation/ALSA-Configuration.txt files and could not
> find my model there, but the second file instructed me to post here.
> Here's the lspci -nv snippet: 
> 
> 00:14.2 0403: 1002:437b (rev 01)
>   Subsystem: 1025:009f
>   Flags: bus master, slow devsel, latency 64, IRQ 18
>   Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
>   Capabilities: [50] Power Management version 2 
>   Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
> Enable-
> 
> Best wishes,
> Stanislaw Raczynski

Try adding "model=acer" to your modprobe.conf file.  Also, which version
of alsa are you trying?

Could you post the output from "cat /proc/asound/card0/codec*"?  This
will help identify the exact codec that you have.
-- 
Tobin Davis <tdavis@dsl-only.net>


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: hda_intel ATI SB450 - unknown subsystem ID 1025:009f

[Stanisław Raczyński]

[-- Attachment #1.1: Type: text/plain, Size: 17587 bytes --]

I'm using alsa 1.0.11 right now, but I also have tried 1.0.12 and 1.0.13-rc2.
I tried model=acer, but it doesn't work either.

# cat /proc/asound/card0/codec#0
Codec: Realtek ALC883
Address: 0
Vendor Id: 0x10ec0883
Subsystem Id: 0x1025140d
Revision Id: 0x100002
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x11: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x03 [Audio Output] wcaps 0x11: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x04 [Audio Output] wcaps 0x11: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x05 [Audio Output] wcaps 0x11: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
PCM: rates 0x560, bits 0x1e, types 0x1
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80]
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 1
0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
PCM: rates 0x560, bits 0x1e, types 0x1
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x1f 0x1f] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80]
[0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x1f 0x1f]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x083e: IN OUT HP
Pin Default 0x01011110: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x40: OUT
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083e: IN OUT HP
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 5
0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083e: IN OUT HP
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 5
0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083e: IN OUT HP
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 5
0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP
Pin Default 0x01a1993f: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP
Pin Default 0x01814130: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x20: IN
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x99330131: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x99830132: [Fixed] Line In at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x0810: OUT
Pin Default 0x01451120: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
[0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
[0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x11: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x25 0x0b

# cat /proc/asound/card0/codec#1
Codec: Generic 14f1 ID 2bfa
Address: 1
Vendor Id: 0x14f12bfa
Subsystem Id: 0x1025009f
Revision Id: 0x90000

localhost ~ # cat /proc/asound/card0/codec#3
Codec: Generic ffff ID ffff
Address: 3
Vendor Id: 0xffffffff
Subsystem Id: 0xffffffff
Revision Id: 0xffffffff
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x03 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x04 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x05 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x06 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x07 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x08 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x09 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x0a [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x0b [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x0c [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x0d [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x0e [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x0f [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x10 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x11 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x12 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x13 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x14 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x15 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x16 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x17 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x18 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x19 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x1a [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x1b [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x1c [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x1d [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x1e [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x1f [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x20 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x21 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x22 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x23 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x24 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x25 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0

Node 0x26 [Vendor Defined Widget] wcaps 0xffffffff: Stereo Digital Amp-In
Amp-Out
Amp-In caps: N/A
Amp-In vals:
Amp-Out caps: N/A
Amp-Out vals: [0xffffffff 0xffffffff]
Power: 0xffffffff
Connection: 0


06-09-24, Tobin Davis <tdavis@dsl-only.net > napisał(a):
>
> On Sun, 2006-09-24 at 16:02 +0200, Stanisław Raczyński wrote:
> > Hello,
> >
> > It seems to me that the Intel HDA-based audio card on my new Turion64
> > X2 laptop (Acer Aspire 5102WLMi) is not yet properly
> > supported. I can't make the alsamixer to start (I tried many different
> > model settings infor the snd-hda-intel module):
> >
> > alsamixer: function snd_mixer_load failed: Invalid argument
> >
> > I was searching through alsa-kernel/pci/hda/patch_realtek.c and
> > alsa-kernel/Documentation/ALSA-Configuration.txt files and could not
> > find my model there, but the second file instructed me to post here.
> > Here's the lspci -nv snippet:
> >
> > 00:14.2 0403: 1002:437b (rev 01)
> >   Subsystem: 1025:009f
> >   Flags: bus master, slow devsel, latency 64, IRQ 18
> >   Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
> >   Capabilities: [50] Power Management version 2
> >   Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
> > Enable-
> >
> > Best wishes,
> > Stanislaw Raczynski
>
> Try adding "model=acer" to your modprobe.conf file.  Also, which version
> of alsa are you trying?
>
> Could you post the output from "cat /proc/asound/card0/codec*"?  This
> will help identify the exact codec that you have.
> --
> Tobin Davis < tdavis@dsl-only.net>
>
>

[-- Attachment #1.2: Type: text/html, Size: 20929 bytes --]

[-- Attachment #2: Type: text/plain, Size: 348 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel

Re: hda_intel ATI SB450 - unknown subsystem ID 1025:009f

[Tobin Davis]

[-- Attachment #1.1: Type: text/plain, Size: 1697 bytes --]

On Sun, 2006-09-24 at 19:22 +0200, Stanisław Raczyński wrote:

> I'm using alsa 1.0.11 right now, but I also have tried 1.0.12 and
> 1.0.13-rc2. I tried model=acer, but it doesn't work either.
> 
> # cat /proc/asound/card0/codec#0
> Codec: Realtek ALC883
> Address: 0
> Vendor Id: 0x10ec0883 
> Subsystem Id: 0x1025140d
> Revision Id: 0x100002

This is supported in 1.0.13rc2.  I can add your specific device ID.
Remember, you need the driver, libs, and utils to be in sync to properly
work.  driver 1.0.13rc2 won't work properly with libs 1.0.11, and utils
should be rebuilt against the latest libs to properly work as well.  Try
building and installing the driver, lib, and utils packages from
1.0.13rc2 again.  Build and install each in that order to satisfy
dependencies.

Also, for the driver, try configuring like this "./configure
--with-debug=detect --with-cards=hda-intel".  This will turn on
hda-intel's debugging messages.  Load it with "model=acer" or
"model=auto" if acer doesn't work.  In the mean time, I'll parse through
the rest of your codec#1 output to see if I see anything relevant.


> 
> # cat /proc/asound/card0/codec#1
> Codec: Generic 14f1 ID 2bfa
> Address: 1
> Vendor Id: 0x14f12bfa
> Subsystem Id: 0x1025009f
> Revision Id: 0x90000

This looks like a Conexant modem.  To get support for it, you'll have to
go to linuxant.com and buy their driver.


> localhost ~ # cat /proc/asound/card0/codec#3 
> Codec: Generic ffff ID ffff
> Address: 3
> Vendor Id: 0xffffffff
> Subsystem Id: 0xffffffff
> Revision Id: 0xffffffff

This looks like garbage.  Not sure where it's coming from.  

-- 
Tobin Davis <tdavis@dsl-only.net>

[-- Attachment #1.2: Type: text/html, Size: 2927 bytes --]

[-- Attachment #2: Type: text/plain, Size: 348 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel

Re: hda_intel ATI SB450 - unknown subsystem ID 1025:009f

[Stanisław Raczyński]

[-- Attachment #1.1: Type: text/plain, Size: 1960 bytes --]

After some struggling I finally got it working (with model=acer) with your
tips. Thanks a lot. I hope the information I provided will be somewhat
useful -- you might want to put this device ID in the sources for future
generations.

2006/9/24, Tobin Davis <tdavis@dsl-only.net>:
>
> On Sun, 2006-09-24 at 19:22 +0200, Stanisław Raczyński wrote:
>
> I'm using alsa 1.0.11 right now, but I also have tried 1.0.12 and
> 1.0.13-rc2. I tried model=acer, but it doesn't work either.
>
> # cat /proc/asound/card0/codec#0
> Codec: Realtek ALC883
> Address: 0
> Vendor Id: 0x10ec0883
> Subsystem Id: 0x1025140d
> Revision Id: 0x100002
>
> This is supported in 1.0.13rc2.  I can add your specific device ID.
> Remember, you need the driver, libs, and utils to be in sync to properly
> work.  driver 1.0.13rc2 won't work properly with libs 1.0.11, and utils
> should be rebuilt against the latest libs to properly work as well.  Try
> building and installing the driver, lib, and utils packages from 1.0.13rc2again.  Build and install each in that order to satisfy dependencies.
>
> Also, for the driver, try configuring like this "./configure
> --with-debug=detect --with-cards=hda-intel".  This will turn on hda-intel's
> debugging messages.  Load it with "model=acer" or "model=auto" if acer
> doesn't work.  In the mean time, I'll parse through the rest of your codec#1
> output to see if I see anything relevant.
>
>
> # cat /proc/asound/card0/codec#1
> Codec: Generic 14f1 ID 2bfa
> Address: 1
> Vendor Id: 0x14f12bfa
> Subsystem Id: 0x1025009f
> Revision Id: 0x90000
>
> This looks like a Conexant modem.  To get support for it, you'll have to
> go to linuxant.com and buy their driver.
>
> localhost ~ # cat /proc/asound/card0/codec#3
> Codec: Generic ffff ID ffff
> Address: 3
> Vendor Id: 0xffffffff
> Subsystem Id: 0xffffffff
> Revision Id: 0xffffffff
>
> This looks like garbage.  Not sure where it's coming from.
>
> --
> Tobin Davis <tdavis@dsl-only.net>
>

[-- Attachment #1.2: Type: text/html, Size: 3512 bytes --]

[-- Attachment #2: Type: text/plain, Size: 348 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel

Re: hda_intel ATI SB450 - unknown subsystem ID 1025:009f

[Tobin Davis]

[-- Attachment #1.1: Type: text/plain, Size: 2749 bytes --]

I'll try to submit a patch tomorrow.  This is a simple fix.  Glad you
are working now.

On Sun, 2006-09-24 at 21:36 +0200, Stanisław Raczyński wrote:

> After some struggling I finally got it working (with model=acer) with
> your tips. Thanks a lot. I hope the information I provided will
> be somewhat useful -- you might want to put this device ID in the
> sources for future generations. 
> 
> 
> 2006/9/24, Tobin Davis <tdavis@dsl-only.net>:
> 
>         On Sun, 2006-09-24 at 19:22 +0200, Stanisław Raczyński wrote:
>         
>         > I'm using alsa 1.0.11 right now, but I also have tried
>         > 1.0.12 and 1.0.13-rc2. I tried model=acer, but it doesn't
>         > work either.
>         > 
>         > # cat /proc/asound/card0/codec#0
>         > Codec: Realtek ALC883
>         > Address: 0
>         > Vendor Id: 0x10ec0883 
>         > Subsystem Id: 0x1025140d
>         > Revision Id: 0x100002
>         
>         This is supported in 1.0.13rc2.  I can add your specific
>         device ID.  Remember, you need the driver, libs, and utils to
>         be in sync to properly work.  driver 1.0.13rc2 won't work
>         properly with libs 1.0.11, and utils should be rebuilt against
>         the latest libs to properly work as well.  Try building and
>         installing the driver, lib, and utils packages from 1.0.13rc2
>         again.  Build and install each in that order to satisfy
>         dependencies. 
>         
>         Also, for the driver, try configuring like this "./configure
>         --with-debug=detect --with-cards=hda-intel".  This will turn
>         on hda-intel's debugging messages.  Load it with "model=acer"
>         or "model=auto" if acer doesn't work.  In the mean time, I'll
>         parse through the rest of your codec#1 output to see if I see
>         anything relevant. 
>         
>         
>         > 
>         > # cat /proc/asound/card0/codec#1
>         > Codec: Generic 14f1 ID 2bfa
>         > Address: 1
>         > Vendor Id: 0x14f12bfa
>         > Subsystem Id: 0x1025009f
>         > Revision Id: 0x90000
>         
>         This looks like a Conexant modem.  To get support for it,
>         you'll have to go to linuxant.com and buy their driver.
>         
>         
>         > localhost ~ # cat /proc/asound/card0/codec#3 
>         > Codec: Generic ffff ID ffff
>         > Address: 3
>         > Vendor Id: 0xffffffff
>         > Subsystem Id: 0xffffffff 
>         > Revision Id: 0xffffffff
>         
>         This looks like garbage.  Not sure where it's coming from.  
>         
>         -- 
>         Tobin Davis <tdavis@dsl-only.net> 
> 
> 

-- 
Tobin Davis <tdavis@dsl-only.net>

[-- Attachment #1.2: Type: text/html, Size: 4373 bytes --]

[-- Attachment #2: Type: text/plain, Size: 348 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel