* Snd-usb-audio and usb-phones.
@ 2006-10-20 8:36 K.A.
2006-10-20 9:36 ` Markus Rechberger
2006-10-20 9:53 ` Clemens Ladisch
0 siblings, 2 replies; 7+ messages in thread
From: K.A. @ 2006-10-20 8:36 UTC (permalink / raw)
To: alsa-devel
On Fri, Oct 20, 2006 at 10:08:59AM +0300, akbara wrote:
On Tue, Oct 17, 2006 at 09:57:33AM +0300, akbara wrote:
Hello, Takashi!
I bought a noname usb ip-phone. So when plugging it in, your driver
snd-usb-audio is used. So I decided to ask whether you know if drivers
for such devices exist.
The problem is that the phone is found as an audio device, it uses
the hiddev96 driver, but I can't hear any sound when trying to call to
my Skype contact -- only noise, and crack, and flicks while the call is
processing.
So, my question is: do any drivers for such devices exist? And -- what
can I look for?
Distro -- Debian Etch, 2.6.18 (vanilla).
After plugging in the phone:
-----------------------------------------------------------------
dmesg:
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
2:1:1: cannot get freq at ep 0x2
2:2:1: cannot get freq at ep 0x82
usbcore: registered new driver snd-usb-audio
usbcore: registered new driver hiddev
hiddev96: USB HID v2.01 Device [BUILDWIN SKYPE PHONE] on usb-0000:00:1d.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usb 2-2: USB disconnect, address 2
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
3:1:1: cannot get freq at ep 0x2
3:2:1: cannot get freq at ep 0x82
hiddev96: USB HID v2.01 Device [BUILDWIN SKYPE PHONE] on usb-0000:00:1d.0-2
---------------------------------------------------------------------------
lsmod | grep usb
usbhid 41856 0
snd_usb_audio 78000 0
snd_usb_lib 17944 1 snd_usb_audio
snd_rawmidi 26016 1 snd_usb_lib
snd_pcm 82860 5 snd_usb_audio,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
usbcore 137420 6 usbhid,snd_usb_audio,snd_usb_lib,uhci_hcd,ehci_hcd
------------------------------------------------------------------------------------
lsusb:
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 003: ID 1908:1389
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
-------------------------------------------------------------------------
Is the problem only in special drivers from the vendor?
--
К.А.,
enfant terrible.
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Snd-usb-audio and usb-phones.
2006-10-20 8:36 Snd-usb-audio and usb-phones K.A.
@ 2006-10-20 9:36 ` Markus Rechberger
2006-10-21 14:28 ` K.A.
2006-10-20 9:53 ` Clemens Ladisch
1 sibling, 1 reply; 7+ messages in thread
From: Markus Rechberger @ 2006-10-20 9:36 UTC (permalink / raw)
To: K.A.; +Cc: alsa-devel
Hi,
could you paste the output of usbview on
http://alsa.opensrc.org/usbphone (create this site)
Do you have any link for that usbphone?
I wrote a driver for the au600 usb phone gateway which could be hacked
up to get your device work too.
http://alsa.opensrc.org/au600
the following link provides some more information on what extra
information you could provide (usbsnoop log):
http://www.linuxtv.org/v4lwiki/index.php/USBVideo
cheers,
Markus
On 10/20/06, K.A. <deb.lists@gmail.com> wrote:
> On Fri, Oct 20, 2006 at 10:08:59AM +0300, akbara wrote:
> On Tue, Oct 17, 2006 at 09:57:33AM +0300, akbara wrote:
> Hello, Takashi!
> I bought a noname usb ip-phone. So when plugging it in, your driver
> snd-usb-audio is used. So I decided to ask whether you know if drivers
> for such devices exist.
> The problem is that the phone is found as an audio device, it uses
> the hiddev96 driver, but I can't hear any sound when trying to call to
> my Skype contact -- only noise, and crack, and flicks while the call is
> processing.
> So, my question is: do any drivers for such devices exist? And -- what
> can I look for?
> Distro -- Debian Etch, 2.6.18 (vanilla).
> After plugging in the phone:
> -----------------------------------------------------------------
> dmesg:
> usb 2-2: new full speed USB device using uhci_hcd and address 2
> usb 2-2: configuration #1 chosen from 1 choice
> 2:1:1: cannot get freq at ep 0x2
> 2:2:1: cannot get freq at ep 0x82
> usbcore: registered new driver snd-usb-audio
> usbcore: registered new driver hiddev
> hiddev96: USB HID v2.01 Device [BUILDWIN SKYPE PHONE] on usb-0000:00:1d.0-2
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> usb 2-2: USB disconnect, address 2
> usb 2-2: new full speed USB device using uhci_hcd and address 3
> usb 2-2: configuration #1 chosen from 1 choice
> 3:1:1: cannot get freq at ep 0x2
> 3:2:1: cannot get freq at ep 0x82
> hiddev96: USB HID v2.01 Device [BUILDWIN SKYPE PHONE] on usb-0000:00:1d.0-2
> ---------------------------------------------------------------------------
> lsmod | grep usb
> usbhid 41856 0
> snd_usb_audio 78000 0
> snd_usb_lib 17944 1 snd_usb_audio
> snd_rawmidi 26016 1 snd_usb_lib
> snd_pcm 82860 5
> snd_usb_audio,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
> usbcore 137420 6
> usbhid,snd_usb_audio,snd_usb_lib,uhci_hcd,ehci_hcd
> ------------------------------------------------------------------------------------
> lsusb:
> Bus 003 Device 001: ID 0000:0000
> Bus 004 Device 001: ID 0000:0000
> Bus 002 Device 003: ID 1908:1389
> Bus 002 Device 001: ID 0000:0000
> Bus 001 Device 001: ID 0000:0000
> -------------------------------------------------------------------------
> Is the problem only in special drivers from the vendor?
> --
> К.А.,
> enfant terrible.
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
>
--
Markus Rechberger
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Snd-usb-audio and usb-phones.
2006-10-20 8:36 Snd-usb-audio and usb-phones K.A.
2006-10-20 9:36 ` Markus Rechberger
@ 2006-10-20 9:53 ` Clemens Ladisch
2006-10-20 10:52 ` Markus Rechberger
2006-10-21 14:29 ` K.A.
1 sibling, 2 replies; 7+ messages in thread
From: Clemens Ladisch @ 2006-10-20 9:53 UTC (permalink / raw)
To: K.A., alsa-devel
K.A. wrote:
> I bought a noname usb ip-phone. So when plugging it in, your driver
> snd-usb-audio is used. So I decided to ask whether you know if drivers
> for such devices exist.
Yes, a driver for USB audio devices does exist.
Its name is snd-usb-audio.
> The problem is that the phone is found as an audio device, it uses
> the hiddev96 driver, but I can't hear any sound when trying to call to
> my Skype contact -- only noise, and crack, and flicks while the call is
> processing.
> ...
> 2:1:1: cannot get freq at ep 0x2
> 2:2:1: cannot get freq at ep 0x82
These error messages indicate that your device isn't quite compatible
with the USB audio specification.
Please show the output of "lsusb -v" for this device.
Does this device require a separate driver for Windows, or does it work
with the standard driver shipped with Windows?
Regards,
Clemens
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Snd-usb-audio and usb-phones.
2006-10-20 9:53 ` Clemens Ladisch
@ 2006-10-20 10:52 ` Markus Rechberger
2006-10-20 12:59 ` Takashi Iwai
2006-10-21 14:29 ` K.A.
1 sibling, 1 reply; 7+ messages in thread
From: Markus Rechberger @ 2006-10-20 10:52 UTC (permalink / raw)
To: Clemens Ladisch; +Cc: K. A., alsa-devel
Hi,
On 10/20/06, Clemens Ladisch <cladisch@fastmail.net> wrote:
> K.A. wrote:
> > I bought a noname usb ip-phone. So when plugging it in, your driver
> > snd-usb-audio is used. So I decided to ask whether you know if drivers
> > for such devices exist.
>
> Yes, a driver for USB audio devices does exist.
> Its name is snd-usb-audio.
>
I think it's better to split of usb phones, since they usually have
input keys, CSID, ring detection (if it's a usb phone gateway),
support ringing, hang up/off detection etc.
Asterisk dev guys have lot of experience in the telco area and how
they could implement such devices so it would be nice to get in
contact with some of them.
I also saw userspace libs out there that interface such devices using
usbfs, seems like it works fine for them too.
USB Phones usually only support around 8000 - 9600hz
snd-usb-audio is just fine for standard usbaudio stuff (which isn't
done 100% at the moment either) also hotplugging a device when it's in
use doesn't seem to work with it correctly yet.
cheers,
Markus
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Snd-usb-audio and usb-phones.
2006-10-20 10:52 ` Markus Rechberger
@ 2006-10-20 12:59 ` Takashi Iwai
0 siblings, 0 replies; 7+ messages in thread
From: Takashi Iwai @ 2006-10-20 12:59 UTC (permalink / raw)
To: Markus Rechberger; +Cc: K. A., alsa-devel
At Fri, 20 Oct 2006 12:52:16 +0200,
Markus Rechberger wrote:
>
> snd-usb-audio is just fine for standard usbaudio stuff (which isn't
> done 100% at the moment either) also hotplugging a device when it's in
> use doesn't seem to work with it correctly yet.
Already fixed in the recent version.
Takashi
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Snd-usb-audio and usb-phones.
2006-10-20 9:36 ` Markus Rechberger
@ 2006-10-21 14:28 ` K.A.
0 siblings, 0 replies; 7+ messages in thread
From: K.A. @ 2006-10-21 14:28 UTC (permalink / raw)
To: Markus Rechberger; +Cc: alsa-devel
On Fri, Oct 20, 2006 at 11:36:39AM +0200, Markus Rechberger wrote:
Hi,
> could you paste the output of usbview on
> http://alsa.opensrc.org/usbphone (create this site)
Yes, I have made it.
> Do you have any link for that usbphone?
I think, this one: http://www.buildwin.com.cn/Product.asp?BigClassName=USB%B5%E7%BB%B0%D7%A8%D3%C3%D0%BE%C6%AC
> I wrote a driver for the au600 usb phone gateway which could be hacked
> up to get your device work too.
> http://alsa.opensrc.org/au600
> the following link provides some more information on what extra
> information you could provide (usbsnoop log):
^^^^^^^^^^^^^
Haven't you misprinted?
--
К.А.,
enfant terrible.
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Snd-usb-audio and usb-phones.
2006-10-20 9:53 ` Clemens Ladisch
2006-10-20 10:52 ` Markus Rechberger
@ 2006-10-21 14:29 ` K.A.
1 sibling, 0 replies; 7+ messages in thread
From: K.A. @ 2006-10-21 14:29 UTC (permalink / raw)
To: alsa-devel
On Fri, Oct 20, 2006 at 11:53:49AM +0200, Clemens Ladisch wrote:
> K.A. wrote:
> > I bought a noname usb ip-phone. So when plugging it in, your driver
> > snd-usb-audio is used. So I decided to ask whether you know if drivers
> > for such devices exist.
>
> Yes, a driver for USB audio devices does exist.
> Its name is snd-usb-audio.
I see, but it doesn't help me. :)
> > The problem is that the phone is found as an audio device, it uses
> > the hiddev96 driver, but I can't hear any sound when trying to call to
> > my Skype contact -- only noise, and crack, and flicks while the call is
> > processing.
> > ...
> > 2:1:1: cannot get freq at ep 0x2
> > 2:2:1: cannot get freq at ep 0x82
>
> These error messages indicate that your device isn't quite compatible
> with the USB audio specification.
>
> Please show the output of "lsusb -v" for this device.
---------------------------------------------------------
lsusb -v:
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.18 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.18 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 002: ID 1908:1389
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1908
idProduct 0x1389
bcdDevice 1.00
iManufacturer 1 BUILDWIN
iProduct 2 SKYPE PHONE
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 254
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 0
iInterface 0
AudioControl Interface Descriptor:
bLength 10
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 100
bInCollection 2
baInterfaceNr( 0) 1
baInterfaceNr( 1) 2
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 1
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bNrChannels 2
wChannelConfig 0x0003
Left Front (L)
Right Front (R)
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 2
wTerminalType 0x0201 Microphone
bAssocTerminal 0
bNrChannels 1
wChannelConfig 0x0001
Left Front (L)
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 6
wTerminalType 0x0301 Speaker
bAssocTerminal 0
bSourceID 9
iTerminal 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 7
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 8
iTerminal 0
AudioControl Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 5 (SELECTOR_UNIT)
bUnitID 8
bNrInPins 1
baSource( 0) 10
iSelector 0
AudioControl Interface Descriptor:
bLength 10
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 9
bSourceID 15
bControlSize 1
bmaControls( 0) 0x01
Mute
bmaControls( 1) 0x02
Volume
bmaControls( 2) 0x02
Volume
iFeature 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 10
bSourceID 2
bControlSize 1
bmaControls( 0) 0x43
Mute
Volume
Automatic Gain
bmaControls( 1) 0x00
iFeature 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 13
bSourceID 2
bControlSize 1
bmaControls( 0) 0x03
Mute
Volume
bmaControls( 1) 0x00
iFeature 0
AudioControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 4 (MIXER_UNIT)
bUnitID 15
bNrInPins 2
baSourceID( 0) 1
baSourceID( 1) 13
bNrChannels 2
wChannelConfig 0x0003
Left Front (L)
Right Front (R)
iChannelNames 0
bmControls 0x00
iMixer 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 1
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 16000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 1 Milliseconds
wLockDelay 1 Milliseconds
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 7
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 16000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 2.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 40
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Device Status: 0xc238
(Bus Powered)
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.18 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.18 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0000
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
-------------------------------------------------------
> Does this device require a separate driver for Windows, or does it work
> with the standard driver shipped with Windows?
Well, sound drivers, as I can understand, are standard, because the
system suggests to install ones for the usb-device. There's a program
that distributed with the phone -- SkypePall (or something that sounds alike). This
utility is used by Skype and enables the buttons on the phone. Without
SkypePall it works as a sound card.
--
К.А.,
enfant terrible.
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2006-10-21 14:29 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-10-20 8:36 Snd-usb-audio and usb-phones K.A.
2006-10-20 9:36 ` Markus Rechberger
2006-10-21 14:28 ` K.A.
2006-10-20 9:53 ` Clemens Ladisch
2006-10-20 10:52 ` Markus Rechberger
2006-10-20 12:59 ` Takashi Iwai
2006-10-21 14:29 ` K.A.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.