All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tobin Davis <tdavis@dsl-only.net>
To: David Friggens <david.friggens@mcs.vuw.ac.nz>
Cc: alsa-devel@lists.sourceforge.net,
	Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Subject: Re: Unsupported Realtek ALC260 (snd-hda-intel)
Date: Mon, 23 Oct 2006 23:31:34 -0700	[thread overview]
Message-ID: <1161671494.6960.6.camel@razman> (raw)
In-Reply-To: <453DAD20.7030907@mcs.vuw.ac.nz>

Hang tight.  With this info we should be able to get a driver working
for you.  Fortunately, Realtek is one of the friendly companies, and all
of their specs are online.

Tobin

On Tue, 2006-10-24 at 19:05 +1300, David Friggens wrote:
> Hi Jonathan
> 
> > Could you also sent the output of lspci
> 
> 00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
> 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
> 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
> 00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37
> 00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA
> Controller (rev 80)
> 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host
> Controller (rev 80)
> 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host
> Controller (rev 80)
> 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host
> Controller (rev 80)
> 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
> 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI
> IDE Controller ATI (rev 80)
> 00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
> 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
> 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
> 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon
> Xpress 200M]
> 02:00.0 Network controller: Broadcom Corporation BCM4310 UART (rev 01)
> 08:07.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832
> 08:07.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host
> Adapter (rev 19)
> 08:07.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
> 08:07.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host
> Adapter (rev 0a)
> 08:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 
> > It would seem that both the headphone jack and the internal speaker are
> > being driven by an amplifier outside the ALC260 which is switched on using
> > mechanisms independent of the ALC260 chip itself.  This would be the second
> > laptop we've encountered with a similar issue - even though everything's
> > up these two outputs refuse to produce any sound.
> 
> :-( I suppose it's unlikely that writing to Realtek and/or HP would be
> fruitful.
> 
> > Final thought for the day: could you use alsamixer to change all the
> > pin modes to "Line-in" and then back to "Line-out" or "headphones".  Then
> > try the tests again and see if you get audio from any additional jacks or
> > the internal speaker.
> 
> No change unfortunately. Audio comes only from the mic jack both with
> everything set to Line-out or to Headphone. (The only difference is some
> additional static when MIC1 pin mode is set to headphone.)
> 
> Cheers
> David
> 
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
-- 
Tobin Davis <tdavis@dsl-only.net>


-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

  reply	other threads:[~2006-10-24  6:31 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <mailman.41803.1161639871.22397.alsa-devel@lists.sourceforge.net>
2006-10-24  2:24 ` Unsupported Realtek ALC260 (snd-hda-intel) Jonathan Woithe
2006-10-24  4:28   ` David Friggens
2006-10-24  5:10     ` Jonathan Woithe
2006-10-24  6:05       ` David Friggens
2006-10-24  6:31         ` Tobin Davis [this message]
2006-10-24  6:53           ` Jonathan Woithe
2006-10-21 10:00 David Friggens
2006-10-23 21:44 ` David Friggens

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1161671494.6960.6.camel@razman \
    --to=tdavis@dsl-only.net \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=david.friggens@mcs.vuw.ac.nz \
    --cc=jwoithe@physics.adelaide.edu.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.