All of lore.kernel.org
 help / color / mirror / Atom feed
* hda-intel on HP dv2000 (dv2130ea) (CXT5047)
@ 2007-01-05 16:36 Robert Emil Berge
  2007-01-05 17:17 ` Anthony B. Coates (Alsa lists)
  0 siblings, 1 reply; 5+ messages in thread
From: Robert Emil Berge @ 2007-01-05 16:36 UTC (permalink / raw)
  To: alsa-devel

I've tested the latest version of the hda-intel driver for this laptop. Sound works well through the speakers. The headphone plug still doesn't mute the external speakers. The Master control can only change the volume in the headphones, while the PCM changes both external and headphone volume.
I've noticed that in some programs the sound is much loader than in others with the same mixer settings. I think the ones using oss are less loud than the ones using alsa.
I tried to load the module with model=test, but I didn't notice any change.
I haven't tried recording a lot yet, and only on an older version of the driver, I think. At least then I couldn't record with 44100Hz, but 48000Hz worked.

Here's the info on my laptop:

HP Pavilion dv2000 (dv2130ea)

Subsystem: 103c:30b2

Codec: Conexant CXT5047
Address: 0
Vendor Id: 0x14f15047
Subsystem Id: 0x103c30b2
Revision Id: 0x100000
Default PCM:
    rates [0x40]: 48000
    bits [0x2]: 16
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  PCM:
    rates [0x40]: 48000
    bits [0x2]: 16
    formats [0x1]: PCM
  Power: 0x0
Node 0x11 [Audio Output] wcaps 0x611: Stereo Digital
  PCM:
    rates [0x40]: 48000
    bits [0x2]: 16
    formats [0x1]: PCM
  Power: 0x0
Node 0x12 [Audio Input] wcaps 0x100d1b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  PCM:
    rates [0x40]: 48000
    bits [0x2]: 16
    formats [0x1]: PCM
  Power: 0x0
  Connection: 6
     0x19 0x14 0x15 0x1a* 0x16 0x10
Node 0x13 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x081001c: OUT HP EAPD Detect
  Pin Default 0x0221101f: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Black
  Pin-ctls: 0x40: OUT
  Power: 0x0
  Connection: 3
     0x19* 0x10 0x16
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x0833c: IN OUT HP Detect
  Pin Default 0x02a1102e: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Black
  Pin-ctls: 0x20: IN
  Power: 0x0
  Connection: 2
     0x19* 0x16
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x0833c: IN OUT HP Detect
  Pin Default 0x40000180: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x21: IN
  Power: 0x0
  Connection: 3
     0x1c 0x19* 0x16
Node 0x16 [Pin Complex] wcaps 0x400401: Stereo
  Pincap 0x0860: IN
  Pin Default 0x94330121: [Fixed] CD at Int Right
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x20: IN
  Power: 0x0
Node 0x17 [Pin Complex] wcaps 0x400481: Stereo
  Pincap 0x08324: IN Detect
  Pin Default 0x95a70122: [Fixed] Mic at Int Top
    Conn = Analog, Color = Unknown
  Pin-ctls: 0x21: IN
  Power: 0x0
Node 0x18 [Pin Complex] wcaps 0x400701: Stereo Digital
  Pincap 0x0810: OUT
  Pin Default 0x04440131: [Jack] SPDIF Out at Ext Right
    Conn = RCA, Color = Unknown
  Pin-ctls: 0x00:
  Power: 0x0
  Connection: 1
     0x11
Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-In vals:  [0x17 0x17] [0x80 0x80] [0x80 0x80] [0x17 0x17]
  Power: 0x0
  Connection: 4
     0x10 0x1b 0x1a 0x16
Node 0x1a [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x1f, mute=0
  Amp-Out vals:  [0x03 0x03]
  Power: 0x0
  Connection: 3
     0x15 0x14 0x17
Node 0x1b [Audio Selector] wcaps 0x300501: Stereo
  Power: 0x0
  Connection: 2
     0x14* 0x15
Node 0x1c [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  PCM:
    rates [0x40]: 48000
    bits [0x2]: 16
    formats [0x1]: PCM
  Power: 0x0
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x08314: OUT Detect
  Pin Default 0x92170110: [Fixed] Speaker at Int Front
    Conn = Analog, Color = Unknown
  Pin-ctls: 0x40: OUT
  Power: 0x0
  Connection: 3
     0x1c 0x19* 0x16
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: hda-intel on HP dv2000 (dv2130ea) (CXT5047)
  2007-01-05 16:36 Robert Emil Berge
@ 2007-01-05 17:17 ` Anthony B. Coates (Alsa lists)
  0 siblings, 0 replies; 5+ messages in thread
From: Anthony B. Coates (Alsa lists) @ 2007-01-05 17:17 UTC (permalink / raw)
  To: alsa-devel

Conexant recently supplied documentation to Tobin Davis, who is doing the  
Conexant support in ALSA.  I'm not aware that he has released an updated  
driver since receiving the documentation, so hopefully there will be an  
improved driver before too long.

Cheers, Tony.

On Fri, 05 Jan 2007 16:36:08 -0000, Robert Emil Berge <list@rebi.no> wrote:

> I've tested the latest version of the hda-intel driver for this laptop.  
> Sound works well through the speakers. The headphone plug still doesn't  
> mute the external speakers. The Master control can only change the  
> volume in the headphones, while the PCM changes both external and  
> headphone volume.
> I've noticed that in some programs the sound is much loader than in  
> others with the same mixer settings. I think the ones using oss are less  
> loud than the ones using alsa.
> I tried to load the module with model=test, but I didn't notice any  
> change.
> I haven't tried recording a lot yet, and only on an older version of the  
> driver, I think. At least then I couldn't record with 44100Hz, but  
> 48000Hz worked.
>
> Here's the info on my laptop:
>
> HP Pavilion dv2000 (dv2130ea)
>
> Subsystem: 103c:30b2
>
> Codec: Conexant CXT5047
> Address: 0
> Vendor Id: 0x14f15047
> Subsystem Id: 0x103c30b2
> Revision Id: 0x100000
> Default PCM:
>     rates [0x40]: 48000
>     bits [0x2]: 16
>     formats [0x1]: PCM
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x80 0x80]
>   PCM:
>     rates [0x40]: 48000
>     bits [0x2]: 16
>     formats [0x1]: PCM
>   Power: 0x0
> Node 0x11 [Audio Output] wcaps 0x611: Stereo Digital
>   PCM:
>     rates [0x40]: 48000
>     bits [0x2]: 16
>     formats [0x1]: PCM
>   Power: 0x0
> Node 0x12 [Audio Input] wcaps 0x100d1b: Stereo Amp-In
>   Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
>   Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80  
> 0x80] [0x80 0x80]
>   PCM:
>     rates [0x40]: 48000
>     bits [0x2]: 16
>     formats [0x1]: PCM
>   Power: 0x0
>   Connection: 6
>      0x19 0x14 0x15 0x1a* 0x16 0x10
> Node 0x13 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x1f 0x1f]
>   Pincap 0x081001c: OUT HP EAPD Detect
>   Pin Default 0x0221101f: [Jack] HP Out at Ext Front
>     Conn = 1/8, Color = Black
>   Pin-ctls: 0x40: OUT
>   Power: 0x0
>   Connection: 3
>      0x19* 0x10 0x16
> Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x1f 0x1f]
>   Pincap 0x0833c: IN OUT HP Detect
>   Pin Default 0x02a1102e: [Jack] Mic at Ext Front
>     Conn = 1/8, Color = Black
>   Pin-ctls: 0x20: IN
>   Power: 0x0
>   Connection: 2
>      0x19* 0x16
> Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x1f 0x1f]
>   Pincap 0x0833c: IN OUT HP Detect
>   Pin Default 0x40000180: [N/A] Line Out at Ext N/A
>     Conn = Unknown, Color = Unknown
>   Pin-ctls: 0x21: IN
>   Power: 0x0
>   Connection: 3
>      0x1c 0x19* 0x16
> Node 0x16 [Pin Complex] wcaps 0x400401: Stereo
>   Pincap 0x0860: IN
>   Pin Default 0x94330121: [Fixed] CD at Int Right
>     Conn = ATAPI, Color = Unknown
>   Pin-ctls: 0x20: IN
>   Power: 0x0
> Node 0x17 [Pin Complex] wcaps 0x400481: Stereo
>   Pincap 0x08324: IN Detect
>   Pin Default 0x95a70122: [Fixed] Mic at Int Top
>     Conn = Analog, Color = Unknown
>   Pin-ctls: 0x21: IN
>   Power: 0x0
> Node 0x18 [Pin Complex] wcaps 0x400701: Stereo Digital
>   Pincap 0x0810: OUT
>   Pin Default 0x04440131: [Jack] SPDIF Out at Ext Right
>     Conn = RCA, Color = Unknown
>   Pin-ctls: 0x00:
>   Power: 0x0
>   Connection: 1
>      0x11
> Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
>   Amp-In caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-In vals:  [0x17 0x17] [0x80 0x80] [0x80 0x80] [0x17 0x17]
>   Power: 0x0
>   Connection: 4
>      0x10 0x1b 0x1a 0x16
> Node 0x1a [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x1f, mute=0
>   Amp-Out vals:  [0x03 0x03]
>   Power: 0x0
>   Connection: 3
>      0x15 0x14 0x17
> Node 0x1b [Audio Selector] wcaps 0x300501: Stereo
>   Power: 0x0
>   Connection: 2
>      0x14* 0x15
> Node 0x1c [Audio Output] wcaps 0x41d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x80 0x80]
>   PCM:
>     rates [0x40]: 48000
>     bits [0x2]: 16
>     formats [0x1]: PCM
>   Power: 0x0
> Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x1f 0x1f]
>   Pincap 0x08314: OUT Detect
>   Pin Default 0x92170110: [Fixed] Speaker at Int Front
>     Conn = Analog, Color = Unknown
>   Pin-ctls: 0x40: OUT
>   Power: 0x0
>   Connection: 3
>      0x1c 0x19* 0x16
> Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share  
> your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

^ permalink raw reply	[flat|nested] 5+ messages in thread

* hda-intel on HP dv2000 (dv2130ea) (CXT5047)
@ 2007-01-05 22:52 Robert Emil Berge
  2007-01-06  2:26 ` Tobin Davis
  2007-01-09 21:38 ` Robert Emil Berge
  0 siblings, 2 replies; 5+ messages in thread
From: Robert Emil Berge @ 2007-01-05 22:52 UTC (permalink / raw)
  To: alsa-devel

(I'm sorry if this comes twice, I sent it earlier today, but it hasn't appeard for me yet.)

I've tested the latest version of the hda-intel driver for this laptop. Sound works well through the speakers. The headphone plug still doesn't mute the external speakers. The Master control can only change the volume in the headphones, while the PCM changes both external and headphone volume.
I've noticed that in some programs the sound is much loader than in others with the same mixer settings. I think the ones using oss are less loud than the ones using alsa.
I tried to load the module with model=test, but I didn't notice any change.
I haven't tried recording a lot yet, and only on an older version of the driver, I think. At least then I couldn't record with 44100Hz, but 48000Hz worked.

Here's the info on my laptop:

HP Pavilion dv2000 (dv2130ea)

Subsystem: 103c:30b2

Codec: Conexant CXT5047
Address: 0
Vendor Id: 0x14f15047
Subsystem Id: 0x103c30b2
Revision Id: 0x100000
Default PCM:
    rates [0x40]: 48000
    bits [0x2]: 16
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  PCM:
    rates [0x40]: 48000
    bits [0x2]: 16
    formats [0x1]: PCM
  Power: 0x0
Node 0x11 [Audio Output] wcaps 0x611: Stereo Digital
  PCM:
    rates [0x40]: 48000
    bits [0x2]: 16
    formats [0x1]: PCM
  Power: 0x0
Node 0x12 [Audio Input] wcaps 0x100d1b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  PCM:
    rates [0x40]: 48000
    bits [0x2]: 16
    formats [0x1]: PCM
  Power: 0x0
  Connection: 6
     0x19 0x14 0x15 0x1a* 0x16 0x10
Node 0x13 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x081001c: OUT HP EAPD Detect
  Pin Default 0x0221101f: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Black
  Pin-ctls: 0x40: OUT
  Power: 0x0
  Connection: 3
     0x19* 0x10 0x16
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x0833c: IN OUT HP Detect
  Pin Default 0x02a1102e: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Black
  Pin-ctls: 0x20: IN
  Power: 0x0
  Connection: 2
     0x19* 0x16
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x0833c: IN OUT HP Detect
  Pin Default 0x40000180: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x21: IN
  Power: 0x0
  Connection: 3
     0x1c 0x19* 0x16
Node 0x16 [Pin Complex] wcaps 0x400401: Stereo
  Pincap 0x0860: IN
  Pin Default 0x94330121: [Fixed] CD at Int Right
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x20: IN
  Power: 0x0
Node 0x17 [Pin Complex] wcaps 0x400481: Stereo
  Pincap 0x08324: IN Detect
  Pin Default 0x95a70122: [Fixed] Mic at Int Top
    Conn = Analog, Color = Unknown
  Pin-ctls: 0x21: IN
  Power: 0x0
Node 0x18 [Pin Complex] wcaps 0x400701: Stereo Digital
  Pincap 0x0810: OUT
  Pin Default 0x04440131: [Jack] SPDIF Out at Ext Right
    Conn = RCA, Color = Unknown
  Pin-ctls: 0x00:
  Power: 0x0
  Connection: 1
     0x11
Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-In vals:  [0x17 0x17] [0x80 0x80] [0x80 0x80] [0x17 0x17]
  Power: 0x0
  Connection: 4
     0x10 0x1b 0x1a 0x16
Node 0x1a [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x1f, mute=0
  Amp-Out vals:  [0x03 0x03]
  Power: 0x0
  Connection: 3
     0x15 0x14 0x17
Node 0x1b [Audio Selector] wcaps 0x300501: Stereo
  Power: 0x0
  Connection: 2
     0x14* 0x15
Node 0x1c [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  PCM:
    rates [0x40]: 48000
    bits [0x2]: 16
    formats [0x1]: PCM
  Power: 0x0
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x08314: OUT Detect
  Pin Default 0x92170110: [Fixed] Speaker at Int Front
    Conn = Analog, Color = Unknown
  Pin-ctls: 0x40: OUT
  Power: 0x0
  Connection: 3
     0x1c 0x19* 0x16
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: hda-intel on HP dv2000 (dv2130ea) (CXT5047)
  2007-01-05 22:52 hda-intel on HP dv2000 (dv2130ea) (CXT5047) Robert Emil Berge
@ 2007-01-06  2:26 ` Tobin Davis
  2007-01-09 21:38 ` Robert Emil Berge
  1 sibling, 0 replies; 5+ messages in thread
From: Tobin Davis @ 2007-01-06  2:26 UTC (permalink / raw)
  To: Robert Emil Berge; +Cc: alsa-devel


[-- Attachment #1.1: Type: text/plain, Size: 5730 bytes --]

Message came through both times (you won't get it unless you get the
digest version of alsa-dev email).

I'll be working on this codec some more next week.  As to the recording,
only 48khz is supported by the codec (note the PCM rates in the codec
output).

Tobin

On Fri, 2007-01-05 at 23:52 +0100, Robert Emil Berge wrote:

> (I'm sorry if this comes twice, I sent it earlier today, but it hasn't appeard for me yet.)
> 
> I've tested the latest version of the hda-intel driver for this laptop. Sound works well through the speakers. The headphone plug still doesn't mute the external speakers. The Master control can only change the volume in the headphones, while the PCM changes both external and headphone volume.
> I've noticed that in some programs the sound is much loader than in others with the same mixer settings. I think the ones using oss are less loud than the ones using alsa.
> I tried to load the module with model=test, but I didn't notice any change.
> I haven't tried recording a lot yet, and only on an older version of the driver, I think. At least then I couldn't record with 44100Hz, but 48000Hz worked.
> 
> Here's the info on my laptop:
> 
> HP Pavilion dv2000 (dv2130ea)
> 
> Subsystem: 103c:30b2
> 
> Codec: Conexant CXT5047
> Address: 0
> Vendor Id: 0x14f15047
> Subsystem Id: 0x103c30b2
> Revision Id: 0x100000
> Default PCM:
>     rates [0x40]: 48000
>     bits [0x2]: 16
>     formats [0x1]: PCM
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x80 0x80]
>   PCM:
>     rates [0x40]: 48000
>     bits [0x2]: 16
>     formats [0x1]: PCM
>   Power: 0x0
> Node 0x11 [Audio Output] wcaps 0x611: Stereo Digital
>   PCM:
>     rates [0x40]: 48000
>     bits [0x2]: 16
>     formats [0x1]: PCM
>   Power: 0x0
> Node 0x12 [Audio Input] wcaps 0x100d1b: Stereo Amp-In
>   Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
>   Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
>   PCM:
>     rates [0x40]: 48000
>     bits [0x2]: 16
>     formats [0x1]: PCM
>   Power: 0x0
>   Connection: 6
>      0x19 0x14 0x15 0x1a* 0x16 0x10
> Node 0x13 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x1f 0x1f]
>   Pincap 0x081001c: OUT HP EAPD Detect
>   Pin Default 0x0221101f: [Jack] HP Out at Ext Front
>     Conn = 1/8, Color = Black
>   Pin-ctls: 0x40: OUT
>   Power: 0x0
>   Connection: 3
>      0x19* 0x10 0x16
> Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x1f 0x1f]
>   Pincap 0x0833c: IN OUT HP Detect
>   Pin Default 0x02a1102e: [Jack] Mic at Ext Front
>     Conn = 1/8, Color = Black
>   Pin-ctls: 0x20: IN
>   Power: 0x0
>   Connection: 2
>      0x19* 0x16
> Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x1f 0x1f]
>   Pincap 0x0833c: IN OUT HP Detect
>   Pin Default 0x40000180: [N/A] Line Out at Ext N/A
>     Conn = Unknown, Color = Unknown
>   Pin-ctls: 0x21: IN
>   Power: 0x0
>   Connection: 3
>      0x1c 0x19* 0x16
> Node 0x16 [Pin Complex] wcaps 0x400401: Stereo
>   Pincap 0x0860: IN
>   Pin Default 0x94330121: [Fixed] CD at Int Right
>     Conn = ATAPI, Color = Unknown
>   Pin-ctls: 0x20: IN
>   Power: 0x0
> Node 0x17 [Pin Complex] wcaps 0x400481: Stereo
>   Pincap 0x08324: IN Detect
>   Pin Default 0x95a70122: [Fixed] Mic at Int Top
>     Conn = Analog, Color = Unknown
>   Pin-ctls: 0x21: IN
>   Power: 0x0
> Node 0x18 [Pin Complex] wcaps 0x400701: Stereo Digital
>   Pincap 0x0810: OUT
>   Pin Default 0x04440131: [Jack] SPDIF Out at Ext Right
>     Conn = RCA, Color = Unknown
>   Pin-ctls: 0x00:
>   Power: 0x0
>   Connection: 1
>      0x11
> Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
>   Amp-In caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-In vals:  [0x17 0x17] [0x80 0x80] [0x80 0x80] [0x17 0x17]
>   Power: 0x0
>   Connection: 4
>      0x10 0x1b 0x1a 0x16
> Node 0x1a [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x1f, mute=0
>   Amp-Out vals:  [0x03 0x03]
>   Power: 0x0
>   Connection: 3
>      0x15 0x14 0x17
> Node 0x1b [Audio Selector] wcaps 0x300501: Stereo
>   Power: 0x0
>   Connection: 2
>      0x14* 0x15
> Node 0x1c [Audio Output] wcaps 0x41d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x80 0x80]
>   PCM:
>     rates [0x40]: 48000
>     bits [0x2]: 16
>     formats [0x1]: PCM
>   Power: 0x0
> Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
>   Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
>   Amp-Out vals:  [0x1f 0x1f]
>   Pincap 0x08314: OUT Detect
>   Pin Default 0x92170110: [Fixed] Speaker at Int Front
>     Conn = Analog, Color = Unknown
>   Pin-ctls: 0x40: OUT
>   Power: 0x0
>   Connection: 3
>      0x1c 0x19* 0x16
> Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
> 
> 
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel

-- 
Tobin Davis <tdavis@dsl-only.net>

[-- Attachment #1.2: Type: text/html, Size: 10080 bytes --]

[-- Attachment #2: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: hda-intel on HP dv2000 (dv2130ea) (CXT5047)
  2007-01-05 22:52 hda-intel on HP dv2000 (dv2130ea) (CXT5047) Robert Emil Berge
  2007-01-06  2:26 ` Tobin Davis
@ 2007-01-09 21:38 ` Robert Emil Berge
  1 sibling, 0 replies; 5+ messages in thread
From: Robert Emil Berge @ 2007-01-09 21:38 UTC (permalink / raw)
  To: alsa-devel

I tested some more today, with the latest sources using rsync to download them.
I haven't looked at alsa drivers before, but I thought I'd just look and see what worked. I was curious if it detects the phone jack insertion at all or not. When I load the snd-hda-intel module with model=laptop-hp the cxt5047_hp_unsol_event is triggered when I insert a jack in either of the phone plugs (normal or spdif), and the 
cxt5047_hp_automute is run. But the snd_hda_codec_amp_update commands there don't seem to have any effect on the sound, they're at least not muting the internal speakers.

After compiling my own kernel (2.6.20-rc3) I was able to use the model=test, but then alsamixer wouldn't start, and I got this in /var/log/everything:

Jan  9 01:48:26 audhumla ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
Jan  9 01:48:26 audhumla PCI: Setting latency timer of device 0000:00:1b.0 to 64
Jan  9 01:48:26 audhumla ALSA /home/install/alsa/alsa-latest3/alsa-driver/pci/hda/hda_codec.c:1739: hda_codec: model 'test' is selected
Jan  9 01:48:26 audhumla hda_codec: num_steps = 0 for NID=0x19
Jan  9 01:48:28 audhumla hda_codec: num_steps = 0 for NID=0x19
Jan  9 01:48:38 audhumla hda_codec: num_steps = 0 for NID=0x19

If there's anything else I can test that could be helpful, please tell me.

Robert

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2007-01-09 21:38 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-01-05 22:52 hda-intel on HP dv2000 (dv2130ea) (CXT5047) Robert Emil Berge
2007-01-06  2:26 ` Tobin Davis
2007-01-09 21:38 ` Robert Emil Berge
  -- strict thread matches above, loose matches on Subject: below --
2007-01-05 16:36 Robert Emil Berge
2007-01-05 17:17 ` Anthony B. Coates (Alsa lists)

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.