From: "Michael Chan" <mchan@broadcom.com>
To: "David Miller" <davem@davemloft.net>
Cc: "netdev" <netdev@vger.kernel.org>
Subject: [PATCH v2 8/16][BNX2]: Add ipv6 TSO and checksum for 5709.
Date: Thu, 03 May 2007 00:29:53 -0700 [thread overview]
Message-ID: <1178177393.4909.71.camel@dell> (raw)
In-Reply-To: <1178068303.4820.35.camel@dell>
[BNX2]: Add ipv6 TSO and checksum for 5709.
Signed-off-by: Michael Chan <mchan@broadcom.com>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 89681b3..01977de 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -4537,35 +4537,49 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
u32 tcp_opt_len, ip_tcp_len;
struct iphdr *iph;
- if (skb_header_cloned(skb) &&
- pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
- }
-
vlan_tag_flags |= TX_BD_FLAGS_SW_LSO;
- tcp_opt_len = 0;
- if (tcp_hdr(skb)->doff > 5)
- tcp_opt_len = tcp_optlen(skb);
+ tcp_opt_len = tcp_optlen(skb);
+
+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) {
+ u32 tcp_off = skb_transport_offset(skb) -
+ sizeof(struct ipv6hdr) - ETH_HLEN;
- ip_tcp_len = ip_hdrlen(skb) + sizeof(struct tcphdr);
+ vlan_tag_flags |= ((tcp_opt_len >> 2) << 8) |
+ TX_BD_FLAGS_SW_FLAGS;
+ if (likely(tcp_off == 0))
+ vlan_tag_flags &= ~TX_BD_FLAGS_TCP6_OFF0_MSK;
+ else {
+ tcp_off >>= 3;
+ vlan_tag_flags |= ((tcp_off & 0x3) <<
+ TX_BD_FLAGS_TCP6_OFF0_SHL) |
+ ((tcp_off & 0x10) <<
+ TX_BD_FLAGS_TCP6_OFF4_SHL);
+ mss |= (tcp_off & 0xc) << TX_BD_TCP6_OFF2_SHL;
+ }
+ } else {
+ if (skb_header_cloned(skb) &&
+ pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
- iph = ip_hdr(skb);
- iph->check = 0;
- iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
- tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
- iph->daddr, 0,
- IPPROTO_TCP, 0);
- if (tcp_opt_len || (iph->ihl > 5)) {
- vlan_tag_flags |= ((iph->ihl - 5) +
- (tcp_opt_len >> 2)) << 8;
+ ip_tcp_len = ip_hdrlen(skb) + sizeof(struct tcphdr);
+
+ iph = ip_hdr(skb);
+ iph->check = 0;
+ iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ if (tcp_opt_len || (iph->ihl > 5)) {
+ vlan_tag_flags |= ((iph->ihl - 5) +
+ (tcp_opt_len >> 2)) << 8;
+ }
}
- }
- else
- {
+ } else
mss = 0;
- }
mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
@@ -5233,10 +5247,15 @@ bnx2_set_rx_csum(struct net_device *dev, u32 data)
static int
bnx2_set_tso(struct net_device *dev, u32 data)
{
- if (data)
+ struct bnx2 *bp = netdev_priv(dev);
+
+ if (data) {
dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
- else
- dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO_ECN);
+ if (CHIP_NUM(bp) == CHIP_NUM_5709)
+ dev->features |= NETIF_F_TSO6;
+ } else
+ dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6 |
+ NETIF_F_TSO_ECN);
return 0;
}
@@ -5534,6 +5553,17 @@ bnx2_phys_id(struct net_device *dev, u32 data)
return 0;
}
+static int
+bnx2_set_tx_csum(struct net_device *dev, u32 data)
+{
+ struct bnx2 *bp = netdev_priv(dev);
+
+ if (CHIP_NUM(bp) == CHIP_NUM_5709)
+ return (ethtool_op_set_tx_hw_csum(dev, data));
+ else
+ return (ethtool_op_set_tx_csum(dev, data));
+}
+
static const struct ethtool_ops bnx2_ethtool_ops = {
.get_settings = bnx2_get_settings,
.set_settings = bnx2_set_settings,
@@ -5556,7 +5586,7 @@ static const struct ethtool_ops bnx2_ethtool_ops = {
.get_rx_csum = bnx2_get_rx_csum,
.set_rx_csum = bnx2_set_rx_csum,
.get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
+ .set_tx_csum = bnx2_set_tx_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
.get_tso = ethtool_op_get_tso,
@@ -6094,11 +6124,16 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
memcpy(dev->perm_addr, bp->mac_addr, 6);
bp->name = board_info[ent->driver_data].name;
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+ if (CHIP_NUM(bp) == CHIP_NUM_5709)
+ dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG;
+ else
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
#ifdef BCM_VLAN
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
#endif
dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
+ if (CHIP_NUM(bp) == CHIP_NUM_5709)
+ dev->features |= NETIF_F_TSO6;
if ((rc = register_netdev(dev))) {
dev_err(&pdev->dev, "Cannot register net device\n");
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 8e7b29a..70fb639 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -24,8 +24,11 @@ struct tx_bd {
u32 tx_bd_haddr_hi;
u32 tx_bd_haddr_lo;
u32 tx_bd_mss_nbytes;
+ #define TX_BD_TCP6_OFF2_SHL (14)
u32 tx_bd_vlan_tag_flags;
#define TX_BD_FLAGS_CONN_FAULT (1<<0)
+ #define TX_BD_FLAGS_TCP6_OFF0_MSK (3<<1)
+ #define TX_BD_FLAGS_TCP6_OFF0_SHL (1)
#define TX_BD_FLAGS_TCP_UDP_CKSUM (1<<1)
#define TX_BD_FLAGS_IP_CKSUM (1<<2)
#define TX_BD_FLAGS_VLAN_TAG (1<<3)
@@ -34,6 +37,7 @@ struct tx_bd {
#define TX_BD_FLAGS_END (1<<6)
#define TX_BD_FLAGS_START (1<<7)
#define TX_BD_FLAGS_SW_OPTION_WORD (0x1f<<8)
+ #define TX_BD_FLAGS_TCP6_OFF4_SHL (12)
#define TX_BD_FLAGS_SW_FLAGS (1<<13)
#define TX_BD_FLAGS_SW_SNAP (1<<14)
#define TX_BD_FLAGS_SW_LSO (1<<15)
next prev parent reply other threads:[~2007-05-03 6:42 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-02 1:11 [PATCH 0/20][BNX2]: Bug fixes and more 5709 suppot Michael Chan
2007-05-02 7:10 ` Jeff Garzik
2007-05-02 7:14 ` David Miller
2007-05-03 7:25 ` [ETHTOOL]: Add 2.5G bit definitions Michael Chan
2007-05-03 11:11 ` Jeff Garzik
2007-05-03 20:07 ` David Miller
2007-05-03 20:17 ` David Miller
2007-05-03 7:27 ` [PATCH] ethtool: Add 2.5G support Michael Chan
2007-05-03 11:11 ` Jeff Garzik
2007-05-11 20:46 ` Jeff Garzik
2007-05-03 7:27 ` [PATCH v2 0/16][BNX2]: Bug fixes and more 5709 suppot Michael Chan
2007-05-03 7:28 ` [PATCH v2 1/16][BNX2]: Block MII access when ifdown Michael Chan
2007-05-03 20:18 ` David Miller
2007-05-03 7:28 ` [PATCH v2 2/16][BNX2]: Fix register and memory test on 5709 Michael Chan
2007-05-03 20:18 ` David Miller
2007-05-03 7:28 ` [PATCH v2 3/16][BNX2]: Add 40-bit DMA workaround for 5708 Michael Chan
2007-05-03 20:19 ` David Miller
2007-05-03 7:29 ` [PATCH v2 4/16][BNX2]: Fix race conditions when calling register_netdev() Michael Chan
2007-05-03 20:20 ` David Miller
2007-05-03 7:29 ` [PATCH v2 5/16][BNX2]: Save PCI state during suspend Michael Chan
2007-05-03 20:20 ` David Miller
2007-05-03 7:29 ` [PATCH v2 6/16][BNX2]: Update 5708 firmware Michael Chan
2007-05-03 20:21 ` David Miller
2007-05-03 7:29 ` Michael Chan [this message]
2007-05-03 20:22 ` [PATCH v2 8/16][BNX2]: Add ipv6 TSO and checksum for 5709 David Miller
2007-05-03 7:30 ` [PATCH v2 9/16][BNX2]: Put MII register offsets in the bnx2 struct Michael Chan
2007-05-03 20:23 ` David Miller
2007-05-03 7:30 ` [PATCH v2 10/16][BNX2]: Re-structure the 2.5G Serdes code Michael Chan
2007-05-03 20:23 ` David Miller
2007-05-03 7:30 ` [PATCH v2 11/16][BNX2]: Add support for 5709 Serdes Michael Chan
2007-05-03 20:23 ` David Miller
2007-05-03 7:30 ` [PATCH v2 12/16][BNX2]: Add indirect spinlock Michael Chan
2007-05-03 20:24 ` David Miller
2007-05-03 7:31 ` [PATCH v2 13/16][BNX2]: Restructure PHY event handling Michael Chan
2007-05-03 20:24 ` David Miller
2007-05-03 7:31 ` [PATCH v2 14/16][BNX2]: Add 1-shot MSI handler for 5709 Michael Chan
2007-05-03 20:24 ` David Miller
2007-05-03 7:31 ` [PATCH v2 15/16][BNX2]: Print bus information for PCIE devices Michael Chan
2007-05-03 20:25 ` David Miller
2007-05-03 7:32 ` [PATCH v2 16/16][BNX2]: Update version and reldate Michael Chan
2007-05-03 12:40 ` Jeff Garzik
2007-05-03 20:25 ` David Miller
[not found] ` <1178177565.4909.80.camel@dell>
2007-05-03 20:21 ` [PATCH v2 7/16][BNX2]: Update 5709 firmware David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1178177393.4909.71.camel@dell \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.