AT91 SPI Slave - Anyone get it to work?

AT91 SPI Slave - Anyone get it to work?

[Jason Mcmullan]

I'm working on an AT91SAM9260EK board, and am trying to use the
SPI1 bus in slave mode under Linux.

I have an interrupt handler, and am doing byte-at-time transactions
using SPI_TDR and SPI_RDR (and SPI_TDRE and SPI_RDRF interrupts)

I can receive bytes fine, but my transmitted bytes seem garbled.

My scoped lines looks like clean data and clock, just *wrong* data.

I am running at 100Khz, so it shouldn't be a speed issue.

I'm using 8-bit data buffers.

I've been working on this for about a week, and I'm ready to tear my
hair out in frustration.

Has *anyone* gotten their AT91 SPI to work in slave mode in any fashion?

Thanks.
-- 
Jason Mcmullan <jason.mcmullan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Evil Labs


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/